Exhaust Gas Monitoring Equipment For Air And Climate Available In Latvia
-
PremiumManufactured by Testo, Inc.based in USA
The testo 310 II has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated. In addition, the measuring ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
The System M800 is tested and approved by international test institutes and measures SO2, CO2 and NOx using the reference methods NDUV and NDIR. A light emitter and receiver creates a light path across the internal diameter of the stack. From the receiver, the light is guided in an optical fiber to the ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
EMS-100 Transmission Smokemeter is a kind of divided-flow transmission product, adopting self-developed measuring technology with independent property rights. It can be widely applied in environmental protection departments, vehicle inspection stations, vehicle factories, vehicle repair plants ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DPF/SCR &ASC/DOC System Stationary Source ...
-
PremiumManufactured by ENVEAbased in FRANCE
Ultra-fast NH3 measurement (Ultra-fast response time : < 2 seconds). The use of the UV range for the measurement of NH3 has been specifically selected to avoid any interference with other major emission gases (CO, CO2, H2O etc..) that do not absorb in the ...
-
PremiumManufactured by ENVEAbased in FRANCE
The only system allowing the measurement of 1 or 2 independent streams in a single analysis ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
Ideal for monitoring levels of artificial Concept smoke and particulate levels in the exhaust gas of industrial combustion or air filtration processes. The CEL-046 is an optical instrument designed to measure the concentration of particulate matter in an exhaust gas passing through a duct, stack or flue; typically the exhaust gas from an industrial combustion process or air filtration ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The Model VE 222 is an efficient, all heated and low pressure drop 2-stream sample sequencer, filter and interface for removing solids from two gaseous sample streams. The Model VE 222 utilizes two independent permanently installed all stainless steel mesh sample filters and two independent all stainless steel sample valves in a thermostatic controlled oven to prevent the loss of high molecular ...
-
PremiumManufactured by Tianjin Zwinsoft Technology Co.,Ltdbased in CHINA
ZWIN-GCP08 Gas control panel can connect up to 132 gas detectors,which can realize remote signal transmission; at the same time, it can control solenoid valves, exhaust fans, motors, water pumps, sound and light alarms, spray systems, machinery and equipment, etc to realize automatic job. It can achieve the integration of remote monitoring and cloud monitoring, which is convenient for users to ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Gas analyzers with an FID (flame ionization detector) are well suited for continuous total hydrocarbon measurement. The measurement is not component specific but substance-class specific. In the first approximation, the measurement result is proportional to the number of C atoms in the respective ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
For oxygen standard applications. The OXYMAT 61 is a cost-effective oxygen analyzer for standard applications. The OXYMAT 61 requires ambient air as reference gas. This is supplied by a pump that is integrated into the analyzer housing. Alternatively, pressurized bottle air can be used. The OXYMAT 61 measures oxygen using the paramagnetic alternating pressure method. This guarantees perfect ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
Our company has developed an on-board smokemeter based on optical method with advantages of small size, cheap price and on-board detection. The optical absorption coefficent covers 0-16m-1, which is able to monitor soot emission of diesel engines in any field. It is compatible with OBD ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model SRS-28BMHT heavy duty hand truck mounted mobile low volume air sampler designed for outdoor use with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4’ to 7’ above floor level. Model SRS-28BMHT contains a standard rotameter for flow measurements. The air sampler is contained in a powder coat painted environmental ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
Vehicle Exhaust Optical Bench is a gas analysis module based on Ultraviolet Differential Optical Absorption Spectroscopy(UV-DOAS), which is able to directly measure NO and NO2 in vehicle/steamship exhust and calculate NOx, without ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The VE 112 is an efficient, all heated, low pressure drop sample filter and interface for removing solids from a gaseous sample and supplying sample to up to 5 gas analyzers. It utilizes a permanent all stainless steel 2 micron mesh filter and all stainless steel valve in a thermostatically controlled oven to prevent the loss of high molecular weight hydrocarbons or condensation of water. The ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The exhaust gas analyzer IMR 1440FL is designed to measure exhaust gases on Forklift Trucks, Generators, Cars, and heavy Machinery that are powered by Diesel or Gas Engines. According to regulations it can measure soot on diesel engines and Carbon Monoxide CO on gas powered forklift trucks. Some worldwide regulations require Nitric Oxides NOx, therefore this analyzer can be equipped with a NOx ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
At present, daily calibration or zeroing process before vehicle measurement of exhaust gas analyzers in some detection station will use ambient air for zeroing, not completely meeting purity requirement of zero gas(especially for NO detection based on infrared principle, which will exists oisture interference). In addition, some other detection ststions use zero gas for zeroing but the amount is ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati eDiluter Pro is a portable dilution system that allows easy sample conditioning for a wide range of particle measurement applications. Its compact structure includes a two-stage dilution system with an adjustable dilution factor ranging from 1:25 to 1:225. The high sample output of the Dekati eDiluter Pro allows the system to be fully integrated with all Dekati® Instruments and is also ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eFilter is a unique instrument that combines a standard gravimetric filter holder and sensitive real-time PM detection in one compact instrument. The Dekati eFilter assembly includes a standard gravimetric filter holder that is used to determine gravimetric mass of particles in the ...
-
PremiumManufactured by ENVEAbased in FRANCE
Exists in single or dual stream version and “Ultra Low” version for low CO concentration measurements (0-10 to 0-50 ppm) Installed downstream a chiller, controlled at ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you