Exhaust Gas Monitoring Equipment For Air And Climate In Peru
-
PremiumManufactured by ENVEAbased in FRANCE
Eco-designed, ultra-compact, smart & connected instrument, the MIR 9000e is your next tool to measure combustion exhaust gas from boiler, or gas from different industrial furnaces and process applications. It offers superior metrological performances for the simultaneous multi-gas measurement of: NOx, SO2, CO, O2, residual H2O, CO2, CH4 and N2O (greenhouse gases). ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Hygienic Memosens sensor for turbidity measurement in drinking water, process water and utilities. The hygienic Turbimax CUS52D version with stainless steel housing and clamp connection can be mounted directly into pipelines - ideal for drinking water ...
-
PremiumManufactured by ENVEAbased in FRANCE
Heated Turnkey Gas Analysis System ideally suited for fast, continuous and simultaneous measurements of NH3 and NOx in DeNOx applications (SCR and SNCR). In DeNOx systems using urea injection with ammonia (NH3) as a reducing agent, the flow rate and control of NH3 must be continuously adjusted and controlled to prevent excess NH3 emissions (slip), to reduce environmental impact and cost of ...
-
PremiumManufactured by ENVEAbased in FRANCE
One of the sole QAL 1 certified FID analyzers on the market, also available in a transportable version for the measurement of: THC or simultaneous THC, nmHC & ...
-
PremiumManufactured by ENVEAbased in FRANCE
Very small, ultra-light, with on-board GPS, data logger, battery pack and color TFT display for very comfortable and easy mercury monitoring in ambient air and other gases. Portable mercury monitoring and detection is made easy with the Mercury Tracker 3000 XS. Lightweight, rugged construction and compact, the instrument is perfect for indoor and outdoor screening of mercury concentration in ...
-
PremiumManufactured by ENVEAbased in FRANCE
Ultra-fast NH3 measurement (Ultra-fast response time : < 2 seconds). The use of the UV range for the measurement of NH3 has been specifically selected to avoid any interference with other major emission gases (CO, CO2, H2O etc..) that do not absorb in the ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), enhanced by proprietary technology, is used for the measurement of ...
-
PremiumManufactured by ENVEAbased in FRANCE
The only system allowing the measurement of 1 or 2 independent streams in a single analysis ...
-
PremiumManufactured by ENVEAbased in FRANCE
Exists in single or dual stream version and “Ultra Low” version for low CO concentration measurements (0-10 to 0-50 ppm) Installed downstream a chiller, controlled at ...
-
Manufactured by SAXON Junkalor GmbHbased in GERMANY
The Infralyt SMART was designed to perform the emissions test on vehicles. The device determines the gas components CO, CO2, HC as normal hexane via infrared absorption and O2 via the electro-chemical principle. With a simplification of “Brettschneider” formula, an air-fuel ratio is calculated, which decides on the stoichiometric quality of the combustion process from the exhaust gas. ...
-
Manufactured by Sierra Instruments, Inc.based in USA
Our AirTrak 628S Thermal Mass Flow Meter was originally designed to work specifically with our BG3 Particulate Partial Flow Sampling System as an extremely fast, accurate, and repeatable engine air intake mass flow meter. In addition, the instrument has proven to be an excellent solution in all engine testing ...
-
Manufactured by SAXON Junkalor GmbHbased in GERMANY
Compact workshop instrument for performing the AU on diesel vehicles. with speed sensing for conventional vehicles. with the Bluetooth OBD module for modern OBD vehicles. Future proof for Euro 6 vehicles. Opacilyt 1030 and OBD interface of the vehicle are connected to the PC / laptop. AU software with integrated AU target database. also available for commercial ...
-
Manufactured by SAXON Junkalor GmbHbased in GERMANY
EMISSION TESTER FOR COMBUSTION ENGINES The Infralyt N is used for fast, comprehensive analysis of diesel exhaust gases. With its own development of a special NDIR bench with high precision, the gases CO, CO2 and HC can be measured in the respective ranges. The integration of electrochemical cells for fast NO, NO2 and O2 measurement allows to take a statement to the actual pollutant level. Due to ...
-
Manufactured by Cirrus Research plcbased in UNITED KINGDOM
The CK:261S is a complete noise measurement kit containing a Class 1 Sound Level Meter that has been designed to meet the requirements of ISO 5130-1982 & §29 StVZO for the noise testing of motor vehicles. Designed to be used in workshops, garages and test laboratories alike, the CR:261S is a robust instrument that is simple to operate whilst providing the measurements needed. The CR:261S ...
-
Manufactured by Yamato Scientific America Inc.based in USA
Fume hood with fixed exhaust air ...
-
Manufactured by Sierra Instruments, Inc.based in USA
The InnovaSwitch insertion-type flow switch is a high-performance, industrial-grade mass flow switch for liquids and gases. This product was designed for heavy industrial environments, including high temperature and high pressure. Each InnovaSwitch includes temperature compensation over its entire measurement range to ensure set point stability and accuracy for process temperatures that vary up ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you