Exhaust Gas Monitoring Equipment For Air And Climate In South Korea
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 3433i is a highly accurate and reliable multi-gas monitor with a special configuration for Exhaust Gas or SHED evaporative testing. The measurement system, based on the photoacoustic infrared detection method, is capable of measuring almost any gas that absorbs infrared light. Gas selectivity is achieved through the use of optical filters. Selectively measures a wide ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati eDiluter is a portable dilution system that makes sample conditioning as easy as it can be. The Dekati eDiluter comes standard with a fixed 1:60 dilution factor, but it can as well be provided with a customer specific dilution factor in the range of 1:25-1:225. The Dekati eDiluter dilution parameters can be monitored on an integrated LCD display and a rotary controller knob allows the user ...
-
PremiumManufactured by ENVEAbased in FRANCE
Heated Turnkey Gas Analysis System ideally suited for fast, continuous and simultaneous measurements of NH3 and NOx in DeNOx applications (SCR and SNCR). In DeNOx systems using urea injection with ammonia (NH3) as a reducing agent, the flow rate and control of NH3 must be continuously adjusted and controlled to prevent excess NH3 emissions (slip), to reduce environmental impact and cost of ...
-
PremiumManufactured by ENVEAbased in FRANCE
One of the sole QAL 1 certified FID analyzers on the market, also available in a transportable version for the measurement of: THC or simultaneous THC, nmHC & ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Pressure Diluter DEED-300 is a two-stage dilution device for taking aerosol samples from high pressure conditions, such as in pre-DPF tailpipe emission measurements. The DEED-300 is designed especially for high pressure conditions, and it always keeps a constant dilution factor regardless of the sample pressure inside the tailpipe. The total dilution factor in the DEED-300 unit is ...
-
PremiumManufactured by ENVEAbased in FRANCE
Very small, ultra-light, with on-board GPS, data logger, battery pack and color TFT display for very comfortable and easy mercury monitoring in ambient air and other gases. Portable mercury monitoring and detection is made easy with the Mercury Tracker 3000 XS. Lightweight, rugged construction and compact, the instrument is perfect for indoor and outdoor screening of mercury concentration in ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
The System M800 is tested and approved by international test institutes and measures SO2, CO2 and NOx using the reference methods NDUV and NDIR. A light emitter and receiver creates a light path across the internal diameter of the stack. From the receiver, the light is guided in an optical fiber to the ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eFilter is a unique instrument that combines a standard gravimetric filter holder and sensitive real-time PM detection in one compact instrument. The Dekati eFilter assembly includes a standard gravimetric filter holder that is used to determine gravimetric mass of particles in the ...
-
Manufactured by TSI Incorporatedbased in USA
The Series 6300 CA-CALC Compliance Protocol Exhaust Emissions Analyzers guide consultants and boiler service professionals through each step of the CTM-34 test protocol, provide mass emissions calculations of exhaust emissions and print reports on site. These features streamline the testing process so the user can complete periodic combustion testing quickly and with ensured accuracy. Additional ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The MEXA-1400QL-NX is an exhaust gas analyzer for four nitrogen compounds simultaneously,i.e. NO, NO2, N2O and NH3, utilizing mid-infrared Quantum Cascade Laser technology. By using the high power, high resolution lasers, the analyzer can measure each component accurately,even in low concentrations, with minimum interference from other components in engine exhaust gas. It is suitable for the ...
-
Manufactured by TSI Incorporatedbased in USA
TSI"s Series CA-6000 CA-CALC Single Gas Monitors are ideal exhaust gas analyzers for residential to commercial service technicians and safety inspectors measuring combustion exhaust gases. These exhaust gas analyzers are used to make direct and ambient exhaust gas measurements for tuning and preventative. Plant engineers and maintenance professionals can check critical exhaust gas concentrations ...
-
Manufactured by TSI Incorporatedbased in USA
The AEROTRAK™ Optical Particle Counter is an addition to TSI’s full line of real-time particle measuring instruments including photometers for mass concentration, condensation particle counters for ultrafine particles and diffusion charging with electrometer signal for surface area measurement. Typical applications include cleanroom monitoring, research, exposure assessment, indoor ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The CVS-ONE series is designed for the measurement of diluted emissions from vehicles and engines. The new integrated operating platform, HORIBA ONE PLATFORM is adopted for the CVS-ONE. The hardware has been significantly downsized from previous designs, reducing test cell footprint requirements. It introduces new functions and is more user-friendly, while still maintaining high accuracy. In ...
-
Manufactured by VISKOR CO., LTD.based in SOUTH KOREA
Potable opacity smoke meter VS-8002 stands out due to limited weight and exceptionally compact design. Approved and accurate, it analyses exhaust smoke emissions from diesel combustion ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Hygienic Memosens sensor for turbidity measurement in drinking water, process water and utilities. The hygienic Turbimax CUS52D version with stainless steel housing and clamp connection can be mounted directly into pipelines - ideal for drinking water ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
HORIBA ONE Series Introduces New N-Compounds Analyzer. High accurate nitrogen compounds measurement system using QCL-IR method newly employs 'HORIBA ONE PLATFORM'. This system provides the usability and expandability for your test laboratories, as well as other HORIBA ONE series ...
-
PremiumManufactured by ENVEAbased in FRANCE
The only system allowing the measurement of 1 or 2 independent streams in a single analysis ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eDiluter Pro 1200C is a modified version of the eDiluter Pro dilution system specifically designed for particle measurements from extreme temperatures such as measurements directly from a combustion zone or flame. The eDiluter Pro 1200C includes the standard eDiluter Pro unit combined with the Dekati High Temperature Sampling probe that enables particle sampling from up to 1200 °C. ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), enhanced by proprietary technology, is used for the measurement of ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Diluter DI-1000 is an easy-to-operate and reliable dilution device for diluting aerosol and gaseous samples from any ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you