Exhaust Gas Applications available in Minnesota
-
Premium
Continuous emissions monitoring for real driving emissions
There are many cars that have a large impact on the environment in many places around the world. The emissions from fossil fuel cars are too high, and previous test methods have not given the full picture. Tests in a laboratory has, so far, been made indoors, in laboratories, and they do not match the reality, as they do not take into account the real driving conditions. Therefore, we have developed an accurate and reliable monitoring system that can measure the emissions in real life conditions. Based on our core ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Gas flow management solutions for gas chromatography calibration sector
Environics Gas Mixers, Dilutors and Dividers have been the used in laboratories for over twenty years for applications including gas chromatography-mass spectrometry (GC-MS), GC with Flame Ionization Detector (GC-FID), and GC with thermal conductivity detector (GC-TCD). Our systems can produce gas concentrations from percent to ppb levels at the required flow rates for single or multi-point calibration. In all cases, Environics mixers allow you to use less expensive single-gas cylinders or bulk tanks in place of ...
By Environics, Inc. based in Tolland, CONNECTICUT (USA).
-
Premium
Particle Measurement Instruments for Engine Emissions
Engine emission measurements are typically made in very different environments and conditions depending on the purpose of the measurement. Standardized and regulated particle emission measurements are made in test cell environments, PTI stations and on board a moving vehicles according the details described in the regulations and standards. For various research purposes, engine emissions can be measured in different conditions and even pre-DPF conditions. The requirements for the measurement instrument in these ...
By Dekati Ltd. based in Kangasala, FINLAND.
-
Premium
Particle Measurement Instruments for Non-Road Engine Emissions
Dekati measurement solutions for determination of particulate emissions from engines include both particle detection and sample conditioning solutions. For non-road and off-road emission measurements, we have complete measurement solutions both upstream and downstream exhaust after-treatment devices. The exhaust sample conditions in marine and aircraft engine emission measurements may vary a lot depending on the type of engine, type of fuel and also measurement ...
By Dekati Ltd. based in Kangasala, FINLAND.
-
Premium
Air Quality and Noise Monitoring for Roadside Traffic
Vehicular emissions are the major sources of urban pollution and also affect about 55% of the total human population. The emissions from motor vehicles contribute to hazardous pollutants like nitrogen dioxide, carbon monoxide, and suspended particulate matter. These pollutants cause respiratory diseases and increase the chances of life-threatening diseases amongst the ...
By Oizom Instruments Pvt. Ltd. based in Ahmedabad, INDIA.
-
Premium
Emissions testing for engines
Rich-burn engine exhaust, when uncontrolled, can have wide concentration ranges and both CO and NOX can fluctuate significantly. The on-board CO dilution system will automatically set-up for optimum testing, perfect for a rich burn engine. Lean-burn engines have different exhaust characteristics, but NO2 can make up a significant portion of the total NOX measurement. The 350 measures both NO and NO2 for proper lean-burn engine set-up. Due to high concentration, replaceable interference filters keep the sensors ...
By Testo, Inc. based in West Chester, PENNSYLVANIA (USA).
-
Premium
Environmental Data Monitoring Solutions for Indoor Air Quality
We spend almost 80% of our time indoors (houses, transport, work/school). Potential sources of pollution are numerous: building and furniture materials, human activity (smoking, cleaning products, DIY, kitchen), outside air and combustion devices. All these sources release different types of harmful chemicals: carbon monoxide, CO2, nitrogen oxides, sulfur oxides, volatile organic compounds (benzene, ketones). ECOMESURE offers instruments that measure the air quality in public areas such as stations, shopping ...
By Ecomesure based in Saclay, FRANCE.
-
Premium
Structured packings for gas treatment and exhaust air cleaning
Use in gas scrubbers and bioscrubbers. We develop and produce structured packings that can be used in chemical/physical processes (gas scrubbers) and biological processes ...
By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA).
-
Premium
Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
As exhaust emissions from engine tailpipe have been decreasing in recent years through development of engines and exhaust after-treatment systems, non-exhaust emissions have become a major contributor to total particle emissions from vehicles. Numerous studies have shown that non-exhaust emissions can equal or even exceed those from the exhaust, and we have a measurement system for both types of emissions. Also, the discussions around Euro 7 emission standards has increased the interest and need for non-exhaust ...
By Dekati Ltd. based in Kangasala, FINLAND.
-
Premium
On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
By ENVEA based in Poissy, FRANCE.
-
Premium
Gas analyzers from combustion: control emission monitoring
Today different ministerial directives lead the market to follow the industries. There are power stations, incinerators (domestic wastes, mud, hospitals…) cement industry, ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Marine monitoring solutions
Marine monitoring is a variant of OPSIS general offers for continuous emissions monitoring (CEM) and process control. The special operating conditions on-board vessels call for special measures to comply with regulations and expectations. However, OPSIS has mastered this environment and has for many years successfully delivered systems for marine ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Gas flow management solutions for standard applications sector
Standard Applications of Gas Flow ...
By Environics, Inc. based in Tolland, CONNECTICUT (USA).
-
Premium
Air pollution control for the energy & heat recovery industry
Protect Your Profit Margins. Anguil’s Engineering expertise and flexible solutions ensure payback and optimized performance so your plant can reduce operating costs and greenhouse gas ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Ozone generators for laundry application
In recent years ozone laundry technology has proven itself to be an effective tool in helping to reduce water usage and energy consumption while also reducing wash and dry times, ensuring the absence of microorganisms, and improving the quality and useful life of laundered products. There are economic advantages to an ozone system as well as microbiological and environmental benefits. Currently in the United States there are over 2,000 ozone laundry systems in place and as many as 3,000 more in the United Kingdom ...
By Absolute Ozone® based in Edmonton, ALBERTA (CANADA).
-
Premium
Air Quality Monitoring for Schools and Universities
Students spend more than 25% of their day at School and University campuses. Poor air quality levels at the school campuses put the most vulnerable group at the highest risk. UNICEF and WHO have stated that young lungs are more susceptible to air pollution. Exposure at a young age when the immune system is weaker may lead to permanent respiratory health issues such as asthma and lung cancer. This renders air monitoring essential in and around the school and university ...
By Oizom Instruments Pvt. Ltd. based in Ahmedabad, INDIA.
-
Odor control for rubber and plastic
From process to product, we remove odors from rubber and plastic. Malodors, whether connected to the process or embedded within the end product, are an inherent concern associated with manufacturing polymers. Fortunately, OMI Industries has a versatile solution that’s proven to work within the plastics and rubber industries. Ecosorb odor neutralizing products feature a proprietary, natural and environmentally safe formulation that’s fast acting and effective at removing detrimental polymer odors ...
By OMI Industries (OMI) based in Palatine, ILLINOIS (USA).
-
Industrial manufacturing solutions for the automotive industry
The automotive manufacturing industry consists of vehicle assembly plants that produce cars, light trucks, buses, commercial heavy-duty trucks, as well as tier suppliers that produce automotive parts. These plants require proven environmental air pollution control and filtration solutions. ...
By CECO Environmental based in Dallas, TEXAS (USA).
-
Air pollution control solution for plastics industry
For processes where plastics are molded or extruded (as evidenced by a “hazy” exhaust plume at the stack) scrubbers are used to treat the sub-micron particulates and oil mists generated. Certain other processes (e.g. Fiberglass Reinforced Plastic equipment fabrication) emit VOCs that can be captured with ...
By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).
-
Oily Waste Plants for Oil and Gas Industry
Wherever oil is produced, processed, transported or stored, our clients face large amounts of oily waste in many different forms. Our VacuDry technology allows efficient and environmentally friendly treatment of all oily waste streams within a single plant. Due to the conditions under which the waste is treated (low temperature, vacuum and nitrogen blanketing), the recovered oil can then be reused after ...
By econ industries services GmbH based in Starnberg, GERMANY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you