Exhaust Extraction (Exhaust Gas) Equipment
-
Manufactured by Blaschke Umwelttechnik GmbHbased in GERMANY
Do primarily the same railcars or railway vehicles in your train depot or in your maintenance facility have to be extracted? Then our partially stationary RailPoint exhaust extraction system is the ideal solution for you. The system also securely extracts large exhaust fume quantities and is appealing due to its ...
-
Manufactured by Geovent A/Sbased in DENMARK
GEOVENT A/S offers a number of nozzles for extraction of exhaust fumes, for example, in garages or other places where you need to start vehicles indoors. The various nozzles are adapted to different car sizes/exhausts and workshop/ employee needs. Today, this task is more complex due to vehicle manufacturer’s production of many different ...
-
Manufactured by Coral Engineering Srlbased in ITALY
stop AlS, nozzle BNT, hose-clamp and with rubber covers. Suitable for centralized extraction system. On request, the APVTC could be supplied with automatic exhauster startinq device ...
-
Manufactured by Geovent A/Sbased in DENMARK
The Geovent Channel duct, type 25 in aluminum, is a highly flexible system for the extraction of exhaust fumes, designed for large workshops or assembly lines with a linear work flow. The Channel duct is also used for the extraction of welding fumes. The trolley can easily be moved between the work bays, resulting in a high degree of ...
-
Manufactured by Horizon Internationalbased in UNITED KINGDOM
Horizon-Future vehicle exhaust extraction systems start with single station systems for small/medium vehicles - wall or ceiling mounted, through to large multi-point collection systems suitable for both private cars and commercial vehicles. All systems are designed to exhaust to ...
-
Manufactured by Flextraction Limitedbased in UNITED KINGDOM
Flexible Hose in armoured crush prof rubber for the extraction of exhaust fumes with a maximum heat resistance of max 200°C. The smooth and lightly oiled internal surface reduces the gas friction inside the hose and prevents the rubber from being contaminated by the acids included in the toxic gasses, assuring a longer life of the ...
-
Manufactured by Air Cleaning Specialists, Inc. (ACS)based in USA
All complete vehicle exhaust extraction systems come equipped with a fan or blower. Exhaust fans and blowers are designed to move contaminants through an exhaust hose and away from your garage or workspace. Fume-A-Vent offers a range of fans and blowers, ranging from 1HP to 25HP for facilities with greater ...
-
Manufactured by Ventairebased in USA
Overhead vehicle exhaust extraction is the most common system type due to the broad range of hose storage configurations and system capacities. Each application, layout, and system requirements are different, and because of that, overhead systems offer the flexibility needed to keep the workspace safe from hazardous exhaust fumes. Whether ...
-
Manufactured by Blaschke Umwelttechnik GmbHbased in GERMANY
Blaschke Umwelttechnik is your preferred partner to implement technically challenging exhaust extraction solutions in all production areas of the automobile ...
-
Manufactured by Fumex ABbased in SWEDEN
The ideal exhaust rail for workplaces with moving vehicles. With its unique design and profile rail, APS has the lowest pressure drop on the ...
-
Manufactured by Fumex ABbased in SWEDEN
A practical solution for exhaust extraction when working on stationary vehicles. When not in use the hose retracts completely. Hose reel with mechanical spring return, ASR. Hose reel with motor return, ASRM. Suitable for use with a high ceilings. Always recommended with hoses longer than 12.5 ...
-
Manufactured by Fumex ABbased in SWEDEN
Exhaust extractors with balancing blocks and pivoting arms for stationary vehicles. ASA is recommended mainly for large vehicles and plant machinery, especially where there is a requirement of high temperature operation. The ASA balance block solution is available in two variants, with or without a pivoting ...
-
Manufactured by Nedermanbased in SWEDEN
Nederman MagnaStack is a fully automatic exhaust extraction system, based on the same technique as MagnaTrack. The extraction unit, however, is a hood enclosure. This connects automatically with the vertical exhaust stack as the vehicle is backed in to the parking bay. An electro-magnet attaches the stack to the hood, and ...
-
Manufactured by Nedermanbased in SWEDEN
Nederman MagnaRail is a high capacity system designed to handle large volumes of exhaust fume. The suction duct serves not only as an exhaust duct, but also as the guide rail that the extraction trolley travels in. Ideal for a drive-through application for vehicles with either high level or low level exhaust pipes. The rail is ...
-
Manufactured by Nedermanbased in SWEDEN
Single Exhaust Extractor is a reliable and functional solution for all types of stationary vehicles. Available with balancer or a cord for manual hose suspension. The balancer automatically raises the hose and nozzle after disconnection, and keeps them lifted at all times. Models for high temperature application are available. Very easy to ...
-
Manufactured by Plymovent Group BVbased in NETHERLANDS
The Sliding Balancer Track System (SBT) sets the standard in extracting vehicle emissions for fire and emergency response vehicles around the world. The SBT system is the preferred system for a single back-in apparatus bay, and is designed to connect to any motor vehicle tail pipe, capturing virtually 100% of the exhaust emissions. The SBT ...
-
Manufactured by Nedermanbased in SWEDEN
Operated via a hand unit - either an IR or a pendant control. The status of operation is shown in a receiving eye on the reel. Electronic limit switches reduce the risk of malfunction and unnecessary wear of the hose - the settings are made from floor level. Mounting of fan directly on reel is ...
-
Manufactured by Nedermanbased in SWEDEN
PTS is suitable for stations where vehicles vary from time to time. The system is based on a nozzle expanded by compressed air, fixing and sealing the nozzle tightly round the tail pipe. PTS is supplied with a choice of two different sized nozzles to fit the most common types of tail pipes. A quick coupler makes it easy to interchange the ...
-
Manufactured by Nedermanbased in SWEDEN
to lightweight material and ball bearing wheels. One extraction unit can serve several workbays. Two 400 units serve cars with twin exhaust pipes. Manual disconnection of exhaust ...
-
Manufactured by Plymovent Group BVbased in NETHERLANDS
The STR system is the preferred system for a drive-through apparatus bay, and is designed to connect to any motor vehicle tail pipe, capturing virtually 100% of the exhaust ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you