Exhaust Gas Equipment For Air And Climate In Australia
-
ShowcaseManufactured by Questron Technologies Corporationbased in CANADA
Ideal for digestion, extraction, evaporation, and synthesis. Built-in temperature and pressure monitoring of each digestion vessel. Controlled release & resealing of over pressure. Simple Vessel handling station.Compatible with LVHT and eVHP type vessels. Remote wireless controller. Two-speed, 150 CFM exhaust for fume removal and vessel ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Direct Fired Thermal Oxidizer (DFTO) thermally destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs) and odorous emissions often discharged from industrial exhaust stacks or chemical processes. It is an ideal abatement technology for process streams heavily laden with pollutants or intermittent batch processes where the oxidizer can come on-line relatively ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Self-Cleaning Ceramic Filter (SCCF) collects, volatilizes and destroys particulate and condensable organics emitted from industrial process streams. It can be used independently as a filter media on hot and cold process streams or coupled with an oxidation module for total odor, Volatile Organic Compound (VOC) and Hazardous Air Pollutant (HAP) ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Emission Concentrator is an adsorption system designed to concentrate large volume, low concentration process exhaust into a much smaller, higher concentrated air stream. The greatly reduced flow with higher Volatile Organic Compound (VOC) concentration is sent to a thermal or catalytic oxidizer for VOC destruction. The destruction device can then be much smaller in size, significantly ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The HT-DLPI+ (High Temperature Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Resolution ELPI+ (Electrical Low Pressure Impactor, HR-ELPI+) is an improved version of the widely used ELPI+ instrument. The High Resolution ELPI+ utilizes a data inversion algorithm that gives real-time particle size distribution in up to 500 size classes 6 nm – 10 μm. Other High Resolution ELPI+ features include wide particle sample concentration range, robust ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 7000 Zero Air Generator is a high purity air generator system that is capable of continuous delivery of up to 20 standard liters per minute (SLPM), 30 pounds per square inch (PSI) of dry, contaminant-free air. The Environics ZAG will produce high purity zero air from your dry compressed air source, eliminating the need for expensive, dangerous and bulky gas ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Simple, lightweight dust and opacity monitor designed to measure emission levels in combustion processes where regulatory compliance is not required (for sale in Asia only). The 4200 dust and opacity monitor is AMETEK Land’s compact, cost-effective solution for the continuous monitoring of dust, smoke and particulates in a wide range of industrial applications. NOTE: The 4200 is currently ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 7000 Zero Air Generator is an ultra high purity air generator system that is capable of continuous delivery of up to 20 standard liters per minute (SLPM), 30 pounds per square inch (PSI) of dry, contaminant-free air. The ZAG is a powerful stand-alone unit, so there is no need for you to worry about an external compressed air supply or dangerous and expensive gas ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Pressure Diluter DEED-300 is a two-stage dilution device for taking aerosol samples from high pressure conditions, such as in pre-DPF tailpipe emission measurements. The DEED-300 is designed especially for high pressure conditions, and it always keeps a constant dilution factor regardless of the sample pressure inside the tailpipe. The total dilution factor in the DEED-300 unit is ...
-
PremiumManufactured by ENVEAbased in FRANCE
The only system allowing the measurement of 1 or 2 independent streams in a single analysis ...
-
Manufactured by Freudenberg Filtration Technologiesbased in GERMANY
The premium class of patent quality: Viledon MaxiPleat MX 75 cassette filters have excellent technical properties that create optimum media velocity with low pressure drops even at high volume flows. The high stability of the entire filter construction offers reliable operation, even under extreme ...
-
Manufactured by Colt International Limitedbased in UNITED KINGDOM
AXS 140 is a combined AOV smoke ventilator and roof access hatch designed providing either 1.0m2 or 1.5m2 measured free area in accordance with Approved Document B, Appendix C. It is suitable for use as a staircase ventilator or roof mounted lobby/corridor ventilator and to provide external roof access. It has been tested to and is in compliance with BS EN 12101-2 and is CE marked. It is ...
-
Manufactured by Dürr Systems, Inc.based in USA
Alongside complete Air Pollution Control Systems, Dürr also provides additional parts for upgrading existing systems. These may have been originally supplied by Dürr or by other manufacturers. Because the Oxi.X burner system is used for the combustion of pollutants, it falls into the category of thermal processes for Air Pollution ...
-
Manufactured by Zeeco, Inc.based in USA
The picture (right) shows Zeeco’s GLSF Free-Jet round flame burners in operation. The design uses the Free-Jet method of mixing the fuel gas ejected from the gas tips with the surrounding inert products of combustion which dramatically lowers thermal NOx production. In addition to great NOx reduction performance, the design offers a great turndown of typically 10:1 or greater and each tip ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork Type K rotary pneumatic damper drives are offered in two basic configurations; the PM Series (Pedestal Mount) and the DM Series (Direct Mount). Both Series provide accurate quarter-turn control to dampers on combustion air and flue gas applications. They offer modulating control, isolation open / close control and bus network control to fit your operating ...
-
Manufactured by SAACKE GmbHbased in GERMANY
Around the world, the overwhelming majority of ships run on engines and boilers powered by heavy fuel oil. The resulting combustion exhaust gases that are emitted contain soot and sulfur oxides that pollute the environment. The gradual reduction of limit values is now creating a need for action amongst shipping and charter companies. For new buildings, gas-powered or dual fuel solutions are ...
-
Manufactured by Nedermanbased in SWEDEN
Easy to handle systems for all types of workshops. Unique design of rail and trolley gives very high extraction efficiency. Extraction units are available with balancer for keeping the hose raised, and damper for automatic airflow control. Using click on brackets for rail means easy installation. Extraction units are easy to move, thanks to lightweight material and ball bearing wheels. One ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
The TOC 1000 has been engineered using the latest in PSA and air catalyst technology to supply clean, dry, CO2 and hydrocarbon-free air for Total Organic Carbon analyzers using combustion catalytic oxidation. The TOC 1000 provides a consistent and continuous supply of carrier and combustion air for TC, IC, TOC and NPOC analysis from a compact, bench-top system. Meeting the purity requirements of ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
The CL.AIR Exhaust After-Treatment System for GE’s Jenbacher gas engines is a thermal regenerative post-combustion system for engine exhaust gases. Since no catalytic reactions take place during the thermal treatment of the exhaust, as it is insensitive to impurities in the fuel gas, the CL.AIR system is particularly suitable for use with critical gases such as biogas, for which catalytic ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you