Exhaust Monitoring Equipment For Air And Climate Available In Tennessee
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
VGT-100V Vehicle Emission Tester is a product designed on the basis of Vehicle Mass Analysis System (VMAS) of gasoline. It is used to measure concentration of exhaust gas discharged by vehicle engines, including NO, NO2, CO, CO2, HC, O2, etc. Among which, the measurement of NO and NO2 adopts UV Differential Optical Absorption Spectroscopy (UV-DOAS), the measurement of CO, CO2 and HC employs ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The use of the measuring principle of dynamic pressure and PT100 assures a device which is easy in design and operating as well as the real-time monitoring of the measuring parameters. The operating and display unit is integrated in the probe head. On the high-quality display all measuring values, status information and parameters are displayed. Furthermore, a real-time display as line diagram is ...
-
PremiumManufactured by ENVEAbased in FRANCE
Exists in single or dual stream version and “Ultra Low” version for low CO concentration measurements (0-10 to 0-50 ppm) Installed downstream a chiller, controlled at ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
EMS-100 Transmission Smokemeter is a kind of divided-flow transmission product, adopting self-developed measuring technology with independent property rights. It can be widely applied in environmental protection departments, vehicle inspection stations, vehicle factories, vehicle repair plants ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
At present, daily calibration or zeroing process before vehicle measurement of exhaust gas analyzers in some detection station will use ambient air for zeroing, not completely meeting purity requirement of zero gas(especially for NO detection based on infrared principle, which will exists oisture interference). In addition, some other detection ststions use zero gas for zeroing but the amount is ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), enhanced by proprietary technology, is used for the measurement of ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati eDiluter Pro is a portable dilution system that allows easy sample conditioning for a wide range of particle measurement applications. Its compact structure includes a two-stage dilution system with an adjustable dilution factor ranging from 1:25 to 1:225. The high sample output of the Dekati eDiluter Pro allows the system to be fully integrated with all Dekati® Instruments and is also ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The PEMS-1000 portable On-board Emission Test System is a kind of portable analysis device used for real-time detection of vehicle engine exhaust, measuring related technical requirements for exhaust emission test of light-duty vehicles, heavy-duty vehicles and non-road machinery. The system, adopting integrated design to install on the measured vehicle, consists of gas measurement unit, exhaust ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Pressure Diluter DEED-300 is a two-stage dilution device for taking aerosol samples from high pressure conditions, such as in pre-DPF tailpipe emission measurements. The DEED-300 is designed especially for high pressure conditions, and it always keeps a constant dilution factor regardless of the sample pressure inside the tailpipe. The total dilution factor in the DEED-300 unit is ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Diluter DI-1000 is an easy-to-operate and reliable dilution device for diluting aerosol and gaseous samples from any ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eDiluter Pro 1200C is a modified version of the eDiluter Pro dilution system specifically designed for particle measurements from extreme temperatures such as measurements directly from a combustion zone or flame. The eDiluter Pro 1200C includes the standard eDiluter Pro unit combined with the Dekati High Temperature Sampling probe that enables particle sampling from up to 1200 °C. ...
-
PremiumManufactured by ENVEAbased in FRANCE
Ultra-fast NH3 measurement (Ultra-fast response time : < 2 seconds). The use of the UV range for the measurement of NH3 has been specifically selected to avoid any interference with other major emission gases (CO, CO2, H2O etc..) that do not absorb in the ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The use of the measuring principle of dynamic pressure and PT100 assures a device which is easy in design and operating as well as the real-time monitoring of the measuring parameters. The operating and display unit is integrated in the probe head. On the high-quality display all measuring values, status information and parameters are displayed. Furthermore, a real-time display as line diagram is ...
-
PremiumManufactured by ENVEAbased in FRANCE
Heated Turnkey Gas Analysis System ideally suited for fast, continuous and simultaneous measurements of NH3 and NOx in DeNOx applications (SCR and SNCR). In DeNOx systems using urea injection with ammonia (NH3) as a reducing agent, the flow rate and control of NH3 must be continuously adjusted and controlled to prevent excess NH3 emissions (slip), to reduce environmental impact and cost of ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
Our company has developed an on-board smokemeter based on optical method with advantages of small size, cheap price and on-board detection. The optical absorption coefficent covers 0-16m-1, which is able to monitor soot emission of diesel engines in any field. It is compatible with OBD ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The new Dekati MPEC+ (Mobile Particle Emission Counter) is a compact and portable instrument for easy onboard PN-PEMS measurements. At the core of the MPEC+ is the patented Dekati ePNC particle counting technology, which has been further optimized for fast transient emission measurements. The MPEC+ is the device of choice for highly accurate PN-PEMS testing in accordance with RDE requirements. ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The exhaust gas analyzer IMR 1440FL is designed to measure exhaust gases on Forklift Trucks, Generators, Cars, and heavy Machinery that are powered by Diesel or Gas Engines. According to regulations it can measure soot on diesel engines and Carbon Monoxide CO on gas powered forklift trucks. Some worldwide regulations require Nitric Oxides NOx, therefore this analyzer can be equipped with a NOx ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati eDiluter is a portable dilution system that makes sample conditioning as easy as it can be. The Dekati eDiluter comes standard with a fixed 1:60 dilution factor, but it can as well be provided with a customer specific dilution factor in the range of 1:25-1:225. The Dekati eDiluter dilution parameters can be monitored on an integrated LCD display and a rotary controller knob allows the user ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
Ideal for monitoring levels of artificial Concept smoke and particulate levels in the exhaust gas of industrial combustion or air filtration processes. The CEL-046 is an optical instrument designed to measure the concentration of particulate matter in an exhaust gas passing through a duct, stack or flue; typically the exhaust gas from an industrial combustion process or air filtration ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The HT-DLPI+ (High Temperature Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you