Exhaust Removal Equipment For Air And Climate Available In Congo
-
ShowcaseManufactured by Questron Technologies Corporationbased in CANADA
Ideal for digestion, extraction, evaporation, and synthesis. Built-in temperature and pressure monitoring of each digestion vessel. Controlled release & resealing of over pressure. Simple Vessel handling station.Compatible with LVHT and eVHP type vessels. Remote wireless controller. Two-speed, 150 CFM exhaust for fume removal and vessel ...
-
PremiumManufactured by Labconco Corporationbased in USA
The Protector XStream Laboratory Hood takes containment, safety and energy savings to the extreme. This general chemical, high performance fume hood was independently tested and challenged well beyond the SEFA-1 standards. With a face velocity of 40 fpm and sash fully open, the Protector XStream was subjected to 50 fpm cross drafts, NIH protocol, and tracer gas measurements in the chest of the ...
-
PremiumManufactured by Labconco Corporationbased in USA
The CApture BT is a spacious Cyanoacrylate (CA) evidence fuming chamber with a durable, easy-to-clean stainless steel liner. It is designed with input from Forensics Experts to protect you and your ...
-
PremiumManufactured by Labconco Corporationbased in USA
The CApture BT is a spacious Cyanoacrylate (CA) evidence fuming chamber with a durable, easy-to-clean stainless steel liner. It is designed with input from Forensics Experts to protect you and your ...
-
PremiumManufactured by Labconco Corporationbased in USA
Protector Premier Laboratory Hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of Labconco’s leading line of fume hoods since 1961. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire resistance and easy clean up. Without seams, the interior has fewer points of deterioration for longer ...
-
Manufactured by The Local Exhaust & Ventilation Company Inc. (Lev-Co)based in CANADA
The P2D2-R3 Multi-Purpose Portable Vehicle Exhaust System is an easy-to-position solution for removing diesel and car exhaust gases. This unit can capture exhaust fumes from a tall vertical stack or a common tailpipe. (Patent Pending) ...
-
Manufactured by Koras GmbHbased in GERMANY
Technological leader in the field of recycling systems. The new drum shape (rectangular) enables us to achieve a higher efficiency: The dissolving time of the gold is considerably ...
-
Manufactured by Salare, Inc.based in USA
The Maelstrom™ range of fume hood scrubbers has been specifically designed to reside inside laboratory fume hoods and is therefore kept as simple and compact as possible. The patented technology employed by Maelstrom™ Scrubbers is the same as the technology used on the larger range of industrial scrubbing systems that are commonly supplied to the chemical and pharmaceutical ...
-
Manufactured by NuAire, Inc.based in USA
The LabGard ES 813 Class I Biological Safety Cabinet can be used as a balance enclosure or ductless fume hood for personnel protection for the safe handling of low risk powders, liquids, and animal ...
-
Manufactured by Kelantechnics Environmental Products Co., Ltd.based in CHINA
Unique smoke cover style structure, no additional cover needed, saving the space, easy to knock down. With outside controlling interface that is convenient to accomplish the function of linkage control and remote control, easy to operate. Authority agency inspection and huge amount of applications show the efficiency of fume purification can reach 95%, and decrease the accumulated oil in the ...
-
Manufactured by Bakerbased in USA
The Baker NCB™ e3 biological safety cabinet exceeds specifications for the NCI-1 cabinet developed by the National Cancer Institute, with unique design features proven to enhance containment while inhibiting cross contamination and exposure to chemicals, vapors and gases. Patented under the work surface, HEPA filters and the direct exhaust airflow system combined, increases protection from ...
-
Manufactured by Plymovent Group BVbased in NETHERLANDS
The FUA series ventilation fans are designed for direct mounting on our metal- and hose tube extraction arms and filters or for use as central fans. These fans are equipped with lightweight aluminium impellers, suitable for extracting exhaust gases, volatile fumes and dust. Matched inlet and outlet areas provide, together with the optimized impellers, an even airflow, high capacity and low noise ...
-
Manufactured by Catalytic Exhaust Products LTDbased in CANADA
During engine operation a number of harmful pollutants are produced in various quantities in the combustion chambers of every diesel engine. Diesel exhaust typically contains the following harmful pollutants such as: Carbon Monoxide (CO), Hydrocarbons (HC) and Particulate Matter (PM). These pollutants will cause irritated eyes, nose and throat, headaches, drowsiness, loss of consciousness and ...
-
Manufactured by Diversitechbased in CANADA
Diversitech’s benchtop spray booth is an enclosed workstation designed for the capture of aerosol and spray paint overspray and fumes. The system filters overspray using a paint arrestance prefilter and exhausts harmful VOC fumes outside to protect operators. Common applications included light spray painting, aerosol cans, touch-up work, epoxy coatings and other airborne fume applications. ...
-
Manufactured by Plymovent Group BVbased in NETHERLANDS
VSR is the solution for vehicles that have top exhaust. The Vertical Stack Rail (VSR) is the solution for vehicles that have top exhaust and need to move through an apparatus bay or ...
-
Manufactured by Plymovent Group BVbased in NETHERLANDS
The Magnetic Grabber is a patent pending vehicle exhaust removal device that - with its conical design, integrated magnets and centre self-alignment - provides a very quick, easy and controlled connection and disconnection to a vehicle exhaust system. This nozzle is used mainly in areas where vehicles move in enclosed spaces such as fire ...
-
Manufactured by Jiangsu Aceextech Machinery Co., Ltdbased in CHINA
The KSP series single screw extruder recycling pelletizing machine provides best solution for rigid PP/PE/PS/ABS plastic scraps recycling. It is a specialized system with gentle melting, effective degassing and significant filtration to get high quality ...
-
Manufactured by Air Power Products Limited (APPL)based in CANADA
Chemical agitation Pneumatic conveying Combustion air service Suction gripping Air knife blowoff Dust collection Printing press processes Paper trim removal Fume exhaust Air tables & frames Powder/granular fluidizing Waste water treatment Aeration (i.e. fish ponds, spas, soil ...
-
Manufactured by Hemco Corporationbased in USA
High efficiency, full duty fume hood in 48”, 60”, 72” and 96” widths. UniFlow SE AireStream Fume Hoods are designed for energy savings & maximum user protection. The aerodynamic face opening with airfoil provides uniform air flow through the fume chamber. A constant volume low flow hood with Vector Baffle System directs the air through the fume chamber to the bell ...
-
Manufactured by Handok Clean Tech Co., Ltd.based in SOUTH KOREA
Purume, a premium hybrid filter for air conditioner and heater in cars. Purume is a premium hybrid filter that improves the efficiency of removing fine particulate matter and harmful gases by combining the HEPA particle filter with a high-performance activated carbon block filter, which is rich in ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you