Exhaust Treatment Equipment For Air And Climate Available In Saskatchewan
-
PremiumManufactured by Questron Technologies Corporationbased in CANADA
More than 90% efficiency for most exhaust constituents. Low scrubber reagent consumption of 1 liter per minute. Up to 98% of Cyclonic mist retention. Works best with exhaust flow across from 1,000 to 1,400 ft/min across. Compact and innovative design with dimensions of 20 x 20 x 30 in (W x D x H), 50 lbs. Works with minimum of 30 PSI scrubber reagent inlet pressure. All plastic acid and alkali ...
-
PremiumManufactured by Labconco Corporationbased in USA
Protector Downdraft Powder Stations keep users safe by containing fingerprint powders during processing. The open-sided, open-top workstation provides unrestricted operator movement and accommodates oversized evidence. Available in 2' and 3' widths, two or more workstations may be placed side-by-side to achieve an unlimited number of width combinations. An optional Transition Connector mounts ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DPF/SCR &ASC/DOC System Stationary Source ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
The BA150KS DriveOn® is a 6-inch diesel driven sewage pump and equipped with a priming system. With the unique screw channel impeller, it allows you to pump wastewater with large solids and long fibrous materials. The modern diesel engine is clean, quiet, economical and has a variable speed. The control panel features automatic level control in order to cope with the changing sewage water ...
-
PremiumManufactured by Aljon by C&C Manufacturing, LLCbased in USA
The ADV525 is Aljon’s mid-sized model with weight ranges between 110,000lbs. & 115,000 lbs. with multiple wheel and cleat configurations for greater maneuverability. The ADV525 can effectively process and compact up to 1100 tons per day, will produce between 572 – 598 Pounds Per Linear Inch of compaction depending on the machine configuration, and is powered by a 543 HP, Volvo ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Providing stable spray drying conditions. The Dehumidifier S-396 is designed to provide dry air or to enable continuous work with water and organic solvent mixtures. The accessory improves your spray drying performance, while providing stable spray drying ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
Vehicle Exhaust Optical Bench is a gas analysis module based on Ultraviolet Differential Optical Absorption Spectroscopy(UV-DOAS), which is able to directly measure NO and NO2 in vehicle/steamship exhust and calculate NOx, without ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
Bacti-Cinerator Sterilizer is used in degassing for inoculating loops and needles, instead of alcohol lamps. Due to its convenience, sterilizer is widely used in the environment of biological safety cabinet, the exhaust fan, purification table and mobile ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
Bacti-Cinerator Sterilizer is used in degassing for inoculating loops and needles, instead of alcohol lamps. Due to its convenience, sterilizer is widely used in the environment of biological safety cabinet, the exhaust fan, purification table and mobile ...
-
PremiumManufactured by Labconco Corporationbased in USA
Protector Downdraft Powder Stations keep users safe by containing fingerprint powders during processing. The open-sided, open-top workstation provides unrestricted operator movement and accommodates oversized evidence. Available in 2' and 3' widths, two or more workstations may be placed side-by-side to achieve an unlimited number of width combinations. An optional Transition Connector mounts ...
-
PremiumManufactured by Aljon by C&C Manufacturing, LLCbased in USA
The ADV600 is our heaviest model with weight ranges between 125,000 & 127,500 lbs. We offer multiple wheel and cleat configurations available as needed for specific applications. The ADV600 can effectively process and compact up to 1275 tons per day, will produce between 600 – 613 Pounds Per Linear Inch of compaction depending on the machine configuration, and is powered by a 603 HP, ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The all-rounder for various floor sawing jobs. The RSF 820 can be equipped with various mounting kits and allows the user to perform multiple cutting or grinding applications with only one basic machine. Our engineers were able to draw on 40 years of experience in the development of this fully hydraulic floor sawing system. In addition to the existing expertise, special wishes and requirements of ...
-
PremiumManufactured by Aljon by C&C Manufacturing, LLCbased in USA
The ADV500 is our lightest model with weight ranges between 86,000lbs. & 94,000 lbs. There are multiple wheel and cleat configurations available as needed for specific applications. The ADV500 can effectively process and compact up to 950 tons per day, will produce between 450 – 490 Pounds Per Linear Inch of compaction depending on the machine configuration, and is powered by a 503 HP, ...
-
PremiumManufactured by ENVEAbased in FRANCE
Sample Handling System: used for pumping and conditioning the exhaust gas from the engine to the testing cabinet and ...
-
PremiumManufactured by ENVEAbased in FRANCE
The only system allowing the measurement of 1 or 2 independent streams in a single analysis ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati eDiluter Pro is a portable dilution system that allows easy sample conditioning for a wide range of particle measurement applications. Its compact structure includes a two-stage dilution system with an adjustable dilution factor ranging from 1:25 to 1:225. The high sample output of the Dekati eDiluter Pro allows the system to be fully integrated with all Dekati® Instruments and is also ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
Our RD100 Real Driving Emissions system is an accurate and reliable monitoring system that can measure the emissions from car exhaust in real life conditions. The RD100 system is mounted on a car and measures the real driving emissions during an ordinary ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Engine Exhaust Diluter DEED is an engine exhaust conditioning system that fulfills all requirements and recommendations set forth by EURO 6 legislation for a VPR (Volatile Particle ...
-
Manufactured by Unicarb® Activated Carbon, a part of LSR Materials GmbH & Co KGbased in GERMANY
The UNICARB W-series product group is characterized by a high hardness and a mainly mesoporous pore system. The products are adapted to the respective area of application by means of customer-specific preparation, for example by impregnation or acid washing. ...
-
Manufactured by Weber Kunststofftechnik GmbHbased in GERMANY
According to the Federal Immission Control Act (BImSchG), humans, animals, plants, soil, water, atmosphere, cultural assets and other material goods shall be protected against harmful environmental influences, such as air contaminants. These and other hazards must be avoided with the best available means according to the state of the art. Our exhaust air purification plants are designed as ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you