Exhaust Treatment Equipment For Air And Climate In Australasia
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati eDiluter Pro is a portable dilution system that allows easy sample conditioning for a wide range of particle measurement applications. Its compact structure includes a two-stage dilution system with an adjustable dilution factor ranging from 1:25 to 1:225. The high sample output of the Dekati eDiluter Pro allows the system to be fully integrated with all Dekati® Instruments and is also ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
Our RD100 Real Driving Emissions system is an accurate and reliable monitoring system that can measure the emissions from car exhaust in real life conditions. The RD100 system is mounted on a car and measures the real driving emissions during an ordinary ...
-
PremiumManufactured by Questron Technologies Corporationbased in CANADA
More than 90% efficiency for most exhaust constituents. Low scrubber reagent consumption of 1 liter per minute. Up to 98% of Cyclonic mist retention. Works best with exhaust flow across from 1,000 to 1,400 ft/min across. Compact and innovative design with dimensions of 20 x 20 x 30 in (W x D x H), 50 lbs. Works with minimum of 30 PSI scrubber reagent inlet pressure. All plastic acid and alkali ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Engine Exhaust Diluter DEED is an engine exhaust conditioning system that fulfills all requirements and recommendations set forth by EURO 6 legislation for a VPR (Volatile Particle ...
-
PremiumManufactured by ENVEAbased in FRANCE
The only system allowing the measurement of 1 or 2 independent streams in a single analysis ...
-
PremiumManufactured by ENVEAbased in FRANCE
Sample Handling System: used for pumping and conditioning the exhaust gas from the engine to the testing cabinet and ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Providing stable spray drying conditions. The Dehumidifier S-396 is designed to provide dry air or to enable continuous work with water and organic solvent mixtures. The accessory improves your spray drying performance, while providing stable spray drying ...
-
Manufactured by Cs Clean Systems AGbased in GERMANY
The PRIMELINE series represents the fully-featured version of the CLEANSORB family of dry bed exhaust gas abatement systems. The system is especially engineered to handle the gas flows and related operating conditions of safety-critical process applications – notably those of Metal Organic Chemical Vapor Deposition ...
-
Manufactured by Muntersbased in USA
Two superposed units forming a diamond structure. Process designers have the possibility to extract two benefits from the configuration. First the system requires a single layer of support beams instead of two. Second, the total system height is maximum 2.6 m. Comparing the total required installation height of Design I and III the absorber height can be reduced up to 600mm without reducing any ...
-
Manufactured by SAACKE GmbHbased in GERMANY
Around the world, the overwhelming majority of ships run on engines and boilers powered by heavy fuel oil. The resulting combustion exhaust gases that are emitted contain soot and sulfur oxides that pollute the environment. The gradual reduction of limit values is now creating a need for action amongst shipping and charter companies. For new buildings, gas-powered or dual fuel solutions are ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
The CL.AIR Exhaust After-Treatment System for GE’s Jenbacher gas engines is a thermal regenerative post-combustion system for engine exhaust gases. Since no catalytic reactions take place during the thermal treatment of the exhaust, as it is insensitive to impurities in the fuel gas, the CL.AIR system is particularly suitable for use with critical gases such as biogas, for which catalytic ...
-
Manufactured by Muntersbased in USA
One single stage or 2 superposed V shaped units on 2 support layers. Flushing systems are installed on either up- and/ or downstream side of the mist eliminators. Target applications are Flue gas desulphurization plants for processes with high turn down ratios, Exhaust air treatment plants, Waste Incineration plants and Inlet and exhaust scrubbers with high cleaning requirements. Available in ...
-
Manufactured by Bucher Municipal AGbased in SWITZERLAND
The CityCat 5006 compact sweeper represents a milestone for compact sweepers. The whole package sets standards for performance and range with its high suction power, large hopper and a huge water storage ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Useful capacity 500 l – 50,000 l, indoor and outdoor installation; Our plastic storage tanks guarantee compliance with statutory specifications taking into account country-specific approvals, which regulate the production and operation of systems for storage and metering or environmentally-hazardous ...
-
Manufactured by DEWESoftbased in SLOVENIA
High-accuracy combustion analyzer system for engine research, development and optimization and testing of ignition systems, exhaust systems, and valve control ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
Drying and cooling takes place in the product chamber by convective heat and mass transfer only, between the fluidization gas and the product. Two different designs are supplied, as single or as double mass vibrating system depending on the fluid bed size. This type of fluid bed is used for food and feed as well as for chemical products, mainly for lower line capacities. It is characterized by ...
-
Manufactured by Dürr Systems, Inc.based in USA
Often there are multiple technologies required for combustion turbine projects. Dürr Universal recommends designing a fully integrated, custom system, rather than buying individual pieces of equipment from multiple manufacturers with varying materials. This integrated gas turbine solution includes various combinations of clean, safe and efficient combustion turbine technologies, which are ...
-
Manufactured by Ductmaster India Pvt. Ltd.based in INDIA
Triple laminated with Aluminized polyester on metalized & clear polyester with (ire rated adhesive encapsulating a copper coated steel spring ...
-
Manufactured by TSI Incorporatedbased in USA
Proper dilution and conditioning of exhaust emissions is essential to obtain accurate size distribution and particle number measurements. The Rotating Disk Thermodiluter 379020A is highly regarded in the field of particle emission measurement, especially for sampling, diluting and conditioning exhaust from diesel and spark-ignition engines. And, it is compatible with a wide variety of TSI ...
-
Manufactured by Teledyne APIbased in USA
The Model T200 NO/NO2/NOx analyzer uses the proven chemiluminescence detection principle, coupled with state-of-the-art electronics to allow accurate and dependable low level measurements for use as an ambient analyzer or dilution CEMS ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you