Exhaust Ventilation Equipment For Air And Climate Available In South Korea
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DPF/SCR &ASC/DOC System Stationary Source ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Permanent Total Enclosures (PTEs) provide numerous advantages for manufacturers who paint, spray, coat or apply solvent based materials to their product. The primary function is to provide 100% capture of all fugitive over-spray of harmful air pollutants used within the enclosure, maximizing the capture and control efficiency of the facility. This results in fewer uncontrolled emissions being ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
PT-500L is an integration monitor of temperature, pressure and flow velocity which designed for high dust,high temperature and high humidity. The instrument uses precision micro-differential pressure/static pressure sensor and a unique pitot tube structural design, combined with automatic cleaning. It can be widely used for real-time and continuous measurements of flue gas temperature, pressure, ...
-
PremiumManufactured by Labconco Corporationbased in USA
Using dry heat and nitrogen blow down, the RapidVap Vertex Evaporator speeds evaporation of up to 50 samples at the same time. A convenient touchpad allows easy programming of time and temperature. Up to ten different programs may be stored in the microprocessor for protocol consistency. Unlike water bath heaters, the dry block heater requires less maintenance, no distilled water or additives, ...
-
PremiumManufactured by Labconco Corporationbased in USA
The Protector XStream Laboratory Hood takes containment, safety and energy savings to the extreme. This general chemical, high performance fume hood was independently tested and challenged well beyond the SEFA-1 standards. With a face velocity of 40 fpm and sash fully open, the Protector XStream was subjected to 50 fpm cross drafts, NIH protocol, and tracer gas measurements in the chest of the ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
Concept's smallest smoke machine is the Air Trace, it is the perfect tool if you require a small volume of smoke, and have no mains power available. It runs from a removable 12v DC battery. The Air Trace is available in two models, the standard Air Trace comes in an enamelled orange finish & Air Trace S is in stainless steel. The new design is lighter, more practical and modern. It also ...
-
PremiumManufactured by Questron Technologies Corporationbased in CANADA
Provides required air flow for Vulcan (standard Size), QWave, QWave, QPrep and Qash ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model SRS-28BMHTE heavy duty hand truck mounted mobile low volume air sampler designed for outdoor use with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4’ to 7’ above floor level. Model SRS-28BMHTE contains a standard rotameter for flow measurements. The air sampler is contained in a powder coat painted ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model FJ-28B is counter-top cabinet model, low-volume air sampler with a 1/4 HP oil-less carbon vane vacuum pump, and a constant air flow regulator for use where a near constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the pump to work at a minimum head drop at all ...
-
PremiumManufactured by FPZ S.p.A.based in ITALY
The FPZ range of products consists of a family of blowers/exhausters specially designed for use in ATEX environments (ATmosphere EXplosive). The machines are suitable for transporting potentially explosive fluids such as methane, biogas and technical gases in compression and vacuum ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
Our RD100 Real Driving Emissions system is an accurate and reliable monitoring system that can measure the emissions from car exhaust in real life conditions. The RD100 system is mounted on a car and measures the real driving emissions during an ordinary ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME CEL-4 QuadSet series is a microprocessor-based up to 4 channels multigas detection and control system that can be used with GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a true RS485 daisy chain communication ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
PT-500 temperature pressure & velocity integrated monitor is a new generation online monitoring instrument, which can monitor temperature, pressure and velocity of flue gas inside pipeline for a long term under poor environmental condition. PT-500 is equipped with high-precision micro differential pressure/static pressure sensor with purging unit. Compared with conventional integrated ...
-
PremiumManufactured by Questron Technologies Corporationbased in CANADA
Fume Blower, High Flow, Designed To Handle Highly Corrosive Fumes ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model SRS-28BMHT heavy duty hand truck mounted mobile low volume air sampler designed for outdoor use with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4’ to 7’ above floor level. Model SRS-28BMHT contains a standard rotameter for flow measurements. The air sampler is contained in a powder coat painted environmental ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The CF-5624-WR is optimized to use the minimum amount of electrical power in order to decrease the cost of implementing a solar powered air sampling system. The CF-5624-WR low power requirements also allow extended run times when used with battery only power. The 24 VDC brushless blower has a maximum amp draw of 1.5 Amps for a maximum power requirement of 36 Watts. The CF-5624-WR is designed for ...
-
PremiumManufactured by Labconco Corporationbased in USA
Using dry heat and nitrogen blow down, the RapidVap Vertex Evaporator speeds evaporation of up to 50 samples at the same time. A convenient touchpad allows easy programming of time and temperature. Up to ten different programs may be stored in the microprocessor for protocol consistency. Unlike water bath heaters, the dry block heater requires less maintenance, no distilled water or additives, ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model FJ28BE is counter-top cabinet model, low-volume air sampler with a 1/4 HP oil-less carbon vane vacuum pump, and a constant air flow regulator for use where a near constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the pump to work at a minimum head drop at all ...
-
PremiumManufactured by FPZ S.p.A.based in ITALY
The FPZ range of products consists of a family of vacuum blowers exhausters specially designed for use in ATEX environments (ATmosphere EXplosive). The machines are suitable for transporting potentially explosive fluids such as methane, biogas and technical gases in compression and vacuum ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
Bacti-Cinerator Sterilizer is used in degassing for inoculating loops and needles, instead of alcohol lamps. Due to its convenience, sterilizer is widely used in the environment of biological safety cabinet, the exhaust fan, purification table and mobile ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you