Exhaust Ventilation Equipment For Air And Climate Available In Vermont
-
ShowcaseManufactured by RunDry Evaporatorsbased in USA
RunDry’s RD-E2, 2 gph RunDry Evaporators are a very efficient alternative for disposing of the wastewater from your industrial facility. This unit can be operate for about $0.25USD/gallon or $0.07USD/liter, this is a significant saving if you are paying for a waste hauler to take your wastewater ...
-
PremiumManufactured by Labconco Corporationbased in USA
Using dry heat and nitrogen blow down, the RapidVap Vertex Evaporator speeds evaporation of up to 50 samples at the same time. A convenient touchpad allows easy programming of time and temperature. Up to ten different programs may be stored in the microprocessor for protocol consistency. Unlike water bath heaters, the dry block heater requires less maintenance, no distilled water or additives, ...
-
PremiumManufactured by Questron Technologies Corporationbased in CANADA
Provides required air flow for Vulcan (standard Size), QWave, QWave, QPrep and Qash ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
PT-500 temperature pressure & velocity integrated monitor is a new generation online monitoring instrument, which can monitor temperature, pressure and velocity of flue gas inside pipeline for a long term under poor environmental condition. PT-500 is equipped with high-precision micro differential pressure/static pressure sensor with purging unit. Compared with conventional integrated ...
-
PremiumManufactured by Questron Technologies Corporationbased in CANADA
Fume Blower, High Flow, Designed To Handle Highly Corrosive Fumes ...
-
PremiumManufactured by Labconco Corporationbased in USA
Protector Premier Laboratory Hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of Labconco’s leading line of fume hoods since 1961. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire resistance and easy clean up. Without seams, the interior has fewer points of deterioration for longer ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
Bacti-Cinerator Sterilizer is used in degassing for inoculating loops and needles, instead of alcohol lamps. Due to its convenience, sterilizer is widely used in the environment of biological safety cabinet, the exhaust fan, purification table and mobile ...
-
PremiumManufactured by Labconco Corporationbased in USA
Using dry heat and nitrogen blow down, the RapidVap Vertex Evaporator speeds evaporation of up to 50 samples at the same time. A convenient touchpad allows easy programming of time and temperature. Up to ten different programs may be stored in the microprocessor for protocol consistency. Unlike water bath heaters, the dry block heater requires less maintenance, no distilled water or additives, ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model SRS-28BMHT heavy duty hand truck mounted mobile low volume air sampler designed for outdoor use with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4’ to 7’ above floor level. Model SRS-28BMHT contains a standard rotameter for flow measurements. The air sampler is contained in a powder coat painted environmental ...
-
PremiumManufactured by Labconco Corporationbased in USA
The CApture BT is a spacious Cyanoacrylate (CA) evidence fuming chamber with a durable, easy-to-clean stainless steel liner. It is designed with input from Forensics Experts to protect you and your ...
-
PremiumManufactured by Access Sensor Technologies LLCbased in USA
After many customer requests we have released a custom enclosure for the UPAS v2 and v2+ products. Don't risk your hardware or your data accuracy with a DIY solution. ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
Our RD100 Real Driving Emissions system is an accurate and reliable monitoring system that can measure the emissions from car exhaust in real life conditions. The RD100 system is mounted on a car and measures the real driving emissions during an ordinary ...
-
PremiumManufactured by AVTECH Software, Inc.based in USA
Monitor temperature and active power status with AVTECH's Digital Active Power w/Temperature Sensor. This patented, award winning sensor provides the real-time power status of any electric device by simply strapping it to any AC electrical cord. There is no need to unplug the device, modify the cord, or require an electrician to connect within a main panel, making it easier than ever to monitor ...
-
PremiumManufactured by PHILOS Co. Ltd.based in SOUTH KOREA
Our advanced Membrane Bioreactor (MBR) Containerized System efficiently treats 50m3/day of wastewater, ensuring top-quality treated water and minimal environmental impact through fully automated operation, remote monitoring via SCADA, and odor and sludge removal ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME MegaSet series is a microprocessor-based multipoint multigas detection and control system that can be used with the GasPost sensors. The communication between the Control Panel and the remote GasPost sensor/transmitters is accomplished through a true RS485 daisy chain ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
Concept's smallest smoke machine is the Air Trace, it is the perfect tool if you require a small volume of smoke, and have no mains power available. It runs from a removable 12v DC battery. The Air Trace is available in two models, the standard Air Trace comes in an enamelled orange finish & Air Trace S is in stainless steel. The new design is lighter, more practical and modern. It also ...
-
PremiumManufactured by Labconco Corporationbased in USA
CApture Portable Fuming System features a patented collapsible design; clear, polycarbonate chamber; heater with microprocessor-control in one degree increments between 120° to 350° F (50 to 177° C); two heater receptacles with heater door to accommodate heater pans. Ten aluminum heater pans are included; Stainless steel support manifold with three control slide slots and perforations ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model FJ28BE is counter-top cabinet model, low-volume air sampler with a 1/4 HP oil-less carbon vane vacuum pump, and a constant air flow regulator for use where a near constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the pump to work at a minimum head drop at all ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The CF-5624-WR is optimized to use the minimum amount of electrical power in order to decrease the cost of implementing a solar powered air sampling system. The CF-5624-WR low power requirements also allow extended run times when used with battery only power. The 24 VDC brushless blower has a maximum amp draw of 1.5 Amps for a maximum power requirement of 36 Watts. The CF-5624-WR is designed for ...
-
PremiumManufactured by Rapid Barrier Systems Inc.based in CANADA
Patented Frostfree Re-direction Fitting! This patented simple device channels poisonous fumes asway from your furnace or boiler’s fresh air intake pipes. A must for high efficiency furnaces and boilers which otherwise convey very little heat to the end of the exhaust pipe. Simple one screw installation-for 3-inch diameter exhaust pipes. Install and forget….no maintenance required! ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you