Fine Dust Equipment For Air And Climate In Czech Republic
-
Manufactured by Tionbased in CZECH REPUBLIC
The Tion Clever device kills microorganisms, makes the air healthy, and protects you from a variety of potentially dangerous contaminants, including allergens, fine dust, and bacteria. Tion Clever is compatible with MagicAir can be controlled from a smartphone. ...
-
Manufactured by Kemper GmbHbased in GERMANY
KemJET is a central ventilation system for workshops where local exhaust ventilation systems are not feasible or it is used to supplement such systems. It effectively protects employees and machines from fine dust. The heated, purified air remains in the room, so that in the winter heat from the heating system is retained. This, way large energy cost savings can be ...
-
Manufactured by Tionbased in CZECH REPUBLIC
The Breezer Tion O2 is an inflow ventilation system for home and office. The device takes air from outside, cleans, oxygenates and heats it to a comfortable temperature. Choose time- and energy-saving ventilation! At the same time: ...
-
Manufactured by Kemper GmbHbased in GERMANY
A functional extraction filter unit with timed, automatic filter cleaning system for high levels of smoke and dust and permanent use. The KemTex® ePTFE membrane filter cartridge for ultra-fine dust particles separates particles even below 0.1 µm. Due to the W3/IFA Certification it is also suitable for use in processing chromium-nickel ...
-
Manufactured by Kovodruzstvo v.d. Strazovbased in CZECH REPUBLIC
RVJ single inlet suction fans according to PS 12 3344 are high pressure centrifugal fans, which are manufactured in sizes 560, 630 and 800. They are powered by electric motors, the impeller is mounted directly on the motor shaft or overhung on the shaft. To enhance power the fan of the size 560 and 630 use two wheel sizes and fans of size 800 use three orbital wheels. The fans do not have power ...
-
Manufactured by Freudenberg Filtration Technologiesbased in GERMANY
The cabin air filters of the micronAir proTect line offer drivers and passengers the best possible protection inside the vehicle. In addition to the advantages of the particle and combi filter, this premium cabin air filter reliably and lastingly captures nearly 100 percent of fine dust, virtually 100 percent of all allergens ≥ 2 µm and mold microspores present in the air flow. The ...
-
Manufactured by Kemper GmbHbased in GERMANY
KEMPER Filter-Cell XL extraction filter unit with time-controlled, automatic filter cleaning is suitable for extraction via a pipe on exhaust hoods, tables and robot cells. The device is designed for high levels of smoke and dust during non-stop operation. The KemTex® ePTFE membrane filter cartridge for ultra-fine dust particles separates particles even below 0.1 ...
-
Manufactured by Kemper GmbHbased in GERMANY
The ventilation system CleanAirTower is used wherever local extraction does not work or is insufficient. It effectively protects employees and machines from fine dust. The purified air is recirculated. The device hardly creates any air turbulence, ensuring that no dust is distributed into clean areas. The CleanAirTower functions according to the displacement ventilation principle recommended by ...
-
Manufactured by Kemper GmbHbased in GERMANY
Due to its differential pressure-controlled, automatic filter cleaning system, the stationary cartridge filter for welding fume extraction is suitable for high levels of smoke and dust and non-stop operation with low operating costs. The KemTex® ePTFE membrane filter cartridges for ultra-fine dust particles separate particles even below 0.1 µm. The two-exhaust arm version with integral ...
-
Manufactured by ASIO, spol. s r.o.based in CZECH REPUBLIC
Rainwater, especially when there is intensive rain or rainstorms, contains many surface pollutants, such as soil, sand, leaves, chips from roofs or consolidated surfaces and others. In the course of rainwater infiltration, this mechanical dirt may gradually obstruct infiltration structures, reducing their accumulation volume. At the same time, this dirt may obstruct the throttling device of the ...
-
Manufactured by Freudenberg Filtration Technologiesbased in GERMANY
micronAir particle filters provide effective protection against fine dust as well as pollen, road dust, wear debris, soot, bacteria, industrial dusts and other respirable fine particles. Exhaust gases from diesel vehicles contain fine dust and soot particles that are smaller than 2,5 micrometers. The mucous membranes of the nose and throat or nasal hairs are able to capture only some of ...
-
PremiumManufactured by ENVEAbased in FRANCE
Hybrid monitor utilizing ISO 10473 SRM Method & optical technology for Automatic & Real-Time measurement of PM10, PM2.5 and PM1 fine dust. The standard Beta gauge measurement Method ISO 10473 of the MP101M analyzer allows, when used with the patented optical technology of the OPM module, the continuous and simultaneous measurement of fine dust. Combination of both technologies provide a ...
-
PremiumManufactured by ENVEAbased in FRANCE
PM10, PM2.5 and PM1 fine dust concentration measurement in the range 0-10,000 μg/m3 using the Standard Reference Method. The MP101M particulate analyzer uses the standard ISO 10473 beta gauge measurement method for the continuous measurement of the concentration of fine dust in ambient air. The instrument is certified equivalent to the reference method in accordance with the EN12341 European ...
-
Manufactured by Plymovent Group BVbased in NETHERLANDS
The FlexHood extraction hood is developed to cover a specific welding area, such as a robotic installation. When source extraction is impossible – for example due to the fact that welding robots move on a rail system - extraction hoods are an effective way to extract welding fumes near the actual process. It reduces the amount of fumes, small particles, fine dust, but also mist and aerosols ...
-
Manufactured by Plymovent Group BVbased in NETHERLANDS
Solutions for various facility layouts: Installing a Push-Pull system in your facility not only creates a cleaner, safer work environment, but also provides cost savings. As it is a modular system, the entire facility does not need to be changed; specific work zones can be designated for new ...
-
Manufactured by Thermotron Industriesbased in USA
Designed to test a product’s resistance to extremely dusty, desert-like environments, Thermotron’s Sand and Dust Climatic Chamber meets automotive and other test specifications. Powerful blowers intermittently blow compressed air up through finely powdered sand and dust and then allow the sand and dust to settle back down covering the product. This Specialty Climatic Chamber is built ...
-
Manufactured by Eldan Recycling A/Sbased in DENMARK
The Water Separation System is a cost effective solution to recover metal dust and fine wires from the plastic fraction after the metal separation. By using a well-balanced combination of water, table inclination and oscillating movements you will get an almost clean plastic fraction with metal losses as low as 0.2%. The metal fraction will have a purity of 98-99% (by weight) after drying of the ...
-
Manufactured by Compur Monitors GmbH & Co. KGbased in GERMANY
Protecting people and assets from hydrocarbons. The infrared absorption method of gas detection is ideal to detect hydrocarbons such as fuels. It features enough sensitivity to expand the range of application into the ppm range. For instance fuels such as gasoline, diesel or kerosene are mixtures of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you