Flue Gas Monitoring Equipment For Air And Climate Available In Vietnam
-
ShowcaseManufactured by Testo, Inc.based in USA
Measurement accuracy, configurable measurement display, parallel measurement options, intuitive operation, sturdy housing, connection option to the testo Smart App: Our flue gas analyzer testo 310 II offers everything that heating fitters and technicians need for practical work on heating ...
-
ShowcaseManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
The UV-GAS-500 model gas analyzer is based on DOAS technology,able to measure the concentration of gases including SO2,NO2,NO,NH3,CL2,O3,H2S etc,It has features of high measurement accuracy ,outstandingreliablility,fast response time and wide applicable ...
-
PremiumManufactured by Testo, Inc.based in USA
With its ability to perform both basic and more complex combustion analysis, maintenance, safety checks, and boiler efficiency confirmations, the fully featured testo 310 residential combustion analyzer is ready to provide accurate analysis. The stainless steel probe and cone-stop are perfect for residential and boiler efficiency applications. Simple top-of-display icons show you the current ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A portable monitoring device using conductive cell technology for accurate, periodic measurements of the Acid Dewpoint Temperature (ADT) in combustion processes. Designed specifically to provide the unique but vital measurement of sulphuric acid dewpoint temperature, the portable Lancom 200 supports boiler efficiency checks, corrosion protection and the management of high-cost fuel ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1306 Water Filtration System is an inexpensive, convenient source of deionized, mercury free water for the Series 3300 Mercury CEM. With two stages of pre-filtration eliminating particulate and organic contamination, the final stage R/O membrane and ion-exchange filters have extremely long ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Analyzer for Oxygen Measurements: Gasmet oxygen analyzer is designed for continuous oxygen measurement of wet or dry flue gas. This extractive analyzer is suitable for various industrial applications where reliable and accurate oxygen measurement is ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
Hygronom is the professional humidity meter used to measure the humidity of flue gas emitted by pollution sources. According to measured humidity, it converts wet gas concentration into dry gas concentration. In addition, the HM-200 precision humidity meter also can be used in industrial online humidity ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
ESE-LASER-HCL-200 wall-mounted laser gas analysis system using high temperature with heat extraction technology, continuous online monitoring of the system including sampling and transmission unit, pre conditioning and control unit, analysis unit mainly used in many areas of industrial gas emissions monitoring and process control, for example: coal-fired power plant, waste incineration power ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A highly flexible range of high-precision flue gas oxygen analysers developed specifically for combustion analysis and control applications. Using AMETEK’s industry-proven zirconium oxide sensor technology, the WDG-1200/1210 range provides the world’s first fully-integrated, standalone flue gas oxygen analysers. The user interface is mounted onto the probe, lowering installation ...
-
PremiumManufactured by ENVEAbased in FRANCE
The PCME DM 210 comprises a single compact sensor design with integrated user interface for reliable and robust particulate monitoring for all types of industrial processes. Additional functionality allows the instrument to measure defined units (mg/m³) with QA checks if required by the Process Operator or ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 1400C is a portable Flue Gas Analyzer for commercial and industrial applications.The rugged combustion analyzer can be equipped with up to 4 sensors. Its basic unit has an O2 (Oxygen) and a CO (Carbon Monoxide) sensor. The other two sensors are customer selectable as well as the measuring ranges.The IMR 1400C measures and calculates all the needed parameters to perform a thorough ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The unique sampling probe design is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), supported with a variety of sampling tube, filter, heating units, etc..It has the feature of large filter area and capacity, good air tightness, high filtration precision, leak-proof design, low gas resistance; high precision temperature control, ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 310 II has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated. In addition, the measuring ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 340 is the ideal tool to confirm proper set-up and to identify emission problems before they get serious. Oxygen is the base sensor in all Testo 340 Analyzers. Simply add one, or up to three sensors for your specific job. This combustion analyzer can be configured in many ways for commissioning commercial boilers, testing engines in midstream gas pipelines, tuning industrial burners ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The in-situ gas analyzer LDS 6 is characterized by a high availability and unique analytical selectivity and is optimally suitable for numerous applications. One or two signals from up to three measuring points are processed simultaneously by the central analyzer unit. The sensors are designed for operation under harsh environmental conditions and contain a minimum of electrical ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
FT-3000 is a gas online continuous monitoring system based on fourier transform infrared spectroscopy, monitoring emission gas of SO2, NOx (NO NO2), CH4, NH3, HCl, HF, CO, CO2, O2, H2O and other components at the same time. According to user demand, the analyzer can be extended to measure SO3, N2O and etc. It has high accuracy, wide dynamic range, low detection limit and is suitable for ultra-Iow ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Compact portable multigas analyser, capable of measuring up to eight flue gases in a range of combustion and emissions processes. Lancom 4 delivers the complete solution for portable flue gas analysis, integrated into a compact battery-powered unit able to measure up to eight gases simultaneously with nine separate sensors. Simple to set-up and easy to operate, Lancom 4 enables highly accurate ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
PT-500L is an integration monitor of temperature, pressure and flow velocity which designed for high dust,high temperature and high humidity. The instrument uses precision micro-differential pressure/static pressure sensor and a unique pitot tube structural design, combined with automatic cleaning. It can be widely used for real-time and continuous measurements of flue gas temperature, pressure, ...
-
PremiumManufactured by ENVEAbased in FRANCE
Perfect ammonia gas analyzer or multi-gas analyzer for the measurement in hot & wet flue-gas of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CO2, O2 and ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The flexibility of the IMR 5000 CEMS allows it to offer an endless set of possibilities to measure different parameters like CO, CO2, NO, NO2, CH4, HC, NH3, Cl2, HCl, H2, O3, SO2, H2S, O2, Velocity, Draft, Dust, Temperature and other parameters on ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you