Flue Gas Continuous Analysis equipment (Flue Gas Monitoring)

Premium

Tekran - Model 3300Xi HgCEM - Mercury Continuous Emission Monitor - Mercury CEM - Flue Gas Analysis - Emission Analyzer

The EPA Electric Generating Unit Mercury and Air Toxics (EGU MATS) and Portland Cement Maximum Achievable Control Technology (PC MACT) regulations require reductions in gaseous mercury emissions. Tekran has proven technology to support mercury compliance monitoring, abatement system optimization, and performance audit testing instrumentation.

By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA). from Flue Gas CEM Product line

Premium

Continuous Gas Analysis

ABB is the world's leading manufacturer in the field of continuous gas analysis and system solutions - formerly known as Hartmann & Braun. Our gas analyzers and system solutions are designed and manufactured exclusively in Frankfurt, Germany. More than 75 years of experience in continuous gas analysis are the basis for our innovative ...

By ABB Measurement Products based in Zurich, SWITZERLAND. from Process Analytics Product line

Premium

Model VCEM5100 - Flue Gas Flow Monitor

The VCEM 5000/51000 represents the latest generation of CODEL’s uni ue flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime ...

By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Flow Monitors for Stack Emissions Product line

Premium

Model GCEM4100 - Multi Channel Extractive Flue Gas Analyser

The GCEM4100 is a hot extractive analyser for difficult flue gas monitoring applications. It uses infrared absorption spectroscopy to measure up to seven pollutant species in a single self-contained unit. Many conventional extractive systems require the sampled gas to be cleaned and dried to a very high standard prior to analysis, invariably ...

By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Stack Gas Analysers Product line

Premium

Codel - Model GCEM40E - Hot Extractive Multi-Channel Gas Analyser System

The GCEM40E hot extractive multi-channel gas analyser is CODEL’s industry-proven continuous emissions monitor for difficult applications. Designed exclusively for use on a wide range of applications where the flue gas temperature is abnormally high, low or saturated. Three decades of development, knowledge and practical experience have been ...

By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Stack Gas Analysers Product line

Model BA 2000 / BA 2000-MF / BA 2000-SE - Oxygen Flue Gas Analyzer

In combustion applications such as process heaters, steam generation boilers or furnaces, the amount of air needed to reach optimum system efficiency can vary rapidly. The optimum heat rate for these units, which may lie within narrow limits, can be achieved with the BA2000.

By Bühler Technologies GmbH based in Ratingen, GERMANY. from Gas Analysis - Analysers Product line

FLK Probe - Continuous Gas Analyzers For Oxygen, Carbon Monoxide & Nitrogen Oxide

Continuous analysis of flue gas in the rotary kilns of cement factories is essential for the quality of the generated clinker, the efficient use of fuel and protection of the environment from toxic emissions.

By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA). from Continuous Gas Analytics Product line

Analizzatori Chemist - Model 500 - O2, CO Analyzer with 2 Sensors

2 sensors (O2, CO). Not expandable . Integrated printer . No dilution pump for CO . Not suitable for tightness test UNI 7129/11137.

By SEITRON S.p.A. based in Bassano del Grappa (VI) I, ITALY. from Flue Gas Analyzers Product line

IMR - Model 1400P/PL/PS - 2-4 Cell Flue-Gas Analyzer for the Professional

Measures: O2, CO, NO, NO2 (SO2); draft/pressure; soot; Flue-gas and ambient temperature. Calculates:CO2, combustion efficiency, heat losses, excess air, CO corrected. Comes standard with gas-sampling probe, condensation trap, rugged case,battery, printer, CO-bypass, serial interface, memory, 12VDC.

By IMR Environmental Equipment, Inc. based in St. Petersburg, FLORIDA (USA). from Portable Flue-Gas Analyzers Product line

Tedlar Bags

Tedlar Bags are unlike other sample bag materials, Tedlar film resists gas permeation- both into and out of the bag, assuring sample integrity for all applications. Tedlar is rated for continuous use from -98 to 225 deg F. This wide range of operation of Tedlar Bags allows for use in very cold or very hot environments including stacks, vents, and ...

By Clean Air Engineering, Inc. based in Palatine, ILLINOIS (USA). from Gas Analysis Equipment Product line

MRU - Model OMS 420 - Combustion Optimization System

Using heated ZrO2 sensor for wet O2 analysis up to 1110°F (600°C) flue gas temperature. With optional special heated solid electrolyte sensor for combustibles measurement.

By MRU Instruments, Inc. based in Houston, TEXAS (USA). from Continuous Emission Monitoring (stationary) Product line

Nova Analytical - Model 360WP Series - Portable Flue Gas Analyzer for Oxygen and Carbon Monoxide

The Nova 360 Series are portable analyzers that can provide a detailed analysis of flue gas composition. They have been designed to be accurate, reliable, and easy to use and maintain. The sensors respond quickly to the oxygen and carbon monoxide (CO) present in the flue gas sample. The typical sensor life expectancy is between 3-4 years ...

By Nova Analytical Systems Inc. - part of the Tenova Group based in Niagara Falls, NEW YORK (USA). from Carbon Monoxide Gas Analyzers Product line

a1-cbiss - Model HM 1400 TR - Total Mercury Analyser

a1-cbiss supply a monitoring system for fully-automatic and continuous mercury analysis in smoke gas (without wet chemistry). Measuring principle: In the HM 1400 TR total mercury analyser the sample gas is converted into mercury vapour by a combination of thermal and dry chemical treatment. This is then continuously measured in a photometer. The ...

By a1-cbiss based in Birkenhead, UNITED KINGDOM. from Continuous Emission Monitoring Systems Product line

NOVAplus - Model IV - Compact Analyzers

Compact Flue Gas Measuring Instrument with wireless Remote Control Unit (RCU) for industrial applications.

By MRU Instruments, Inc. based in Houston, TEXAS (USA). from Mobile Fluegas Analysis Product line

Flue Gas Emission Monitoring System

Flue gas emission monitoring for the flue gasses leaving the flue gas emission reduction system of the ROTARY KILN INCINERATOR is required to ensure that final emissions comply with the applicable regulations. Emissions are typically monitored on a continuous basis (CEMS, continuous emission control system); results are represented in the central ...

By Dutch Incinerators BV based in Sint Jansteen, NETHERLANDS. from Rotary Kiln Incinerators Product line

PCME - Model Stackflow 400 - Flue Gas Flow Measurement System

The Stackflow 400 provides high quality and reliable continuous Flow Rate monitoring for industrial stacks for process control, regulatory flow rate and mass emission reporting (kg/year). The instrument is an ultrasonic probe which utilises PCME’s unique FlueSonicTM technology and mathematical measurement algorithm (patent pending).

By PCME Ltd based in St. Ives, UNITED KINGDOM.

Premium

Environnement S.A. - Model MIR 9000H - Heated Multi-Gas Infra-Red GFC Analyzer

The MIR 9000H is a multi-gas infrared analyzer using the Gas Filters Correlation technology (GFC). With its hot measurement principle (180°C on a hot and humid sample), the MIR 9000H is the perfect tool for the analysis of the main gas parameters in many applications, including DeNOx (SCR / SNCR) and the optimization of flue gas treatment ...

By Environnement S.A based in Poissy, FRANCE. from Emission Monitoring - Multigas Stationary Monitoring Systems Product line

COMTEC - Model 6000 - InSitu Analyzer for Measurement of Oxygen and COe

COMTEC 6000 is the world‘s first InSitu analyzer for measurement of oxygen and combustibles in flue and process gases for optimal combustion control. The COMTEC 6000 is an InSitu analyzer for measurement of oxygen and COe (sum of unburned molecules - CO, H2, CxHy) in flue and process gases. This enables the redundant measurement in real time ...

By ENOTEC GmbH based in Marienheide, GERMANY. from Gas Analyzers Product line

Cemtec - Self Cleaning Gas Extraction Probe

CEMTEC was developed for continuous analysis of flue gas in rotary kilns and other extremely dusty high temperature processes such as cement plants, with the goal of increasing product quality with reduced fuel useage while simultaneously reducing harmful emissions. Particularly in view of the increasing usage of alternative fuels in rotary kilns ...

By ENOTEC GmbH based in Marienheide, GERMANY. from Gas Analyzers Product line

Premium

THERMOX - Model CEM/O2 - Oxygen Analyzer

The Need: Continuous Emissions Monitoring systems using hot-wet extractive systems take the flue gas sample from the exit of wet-scrubbers. A hot-wet oxygen measurement is taken from the incoming feed line to the CEM system analysis cabinet. The oxygen analyzer used for this measurement must be equipped to keep the sample gas above the dew point ...

By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from THERMOX Product line

Subscribe to our eBulletins

Add Supplier Profile