Showing results for: Flue Gas Conditioning (Flue Gas) Equipment Available In Croatia
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 400 is a wall-mounted flue-gas dryer, and is designed to prepare flue-gases for a wide variety of gas monitoring applications. The IMR 400 is a 'stand-alone' system that works automatically. The ruseed wall mounted enclosure meets NEMAtype 4 (IP65) classification. The first step of the ...
-
Manufactured by Pentol-Enviro AGbased in SWITZERLAND
Flue gas conditioning is the controlled injection of small quantities of sulfur trioxide into the flue gas stream, reducing the resistivity of the fly ash and permitting its collection in the existing precipitator. When flue gas conditioning is installed on units ...
-
Manufactured by Wahlco, Inc.based in USA
Flue Gas Conditioning is WAHLCO’s traditional core business and the product line which formed the basis of the company’s founding. FGC systems allow coal fired boilers to burn a wider variety of coals, including lower cost high ash coals and low sulfur coals which avoid the cost of scrubber installations, without ...
-
Manufactured by Polytechnik Luft- und Feuerungstechnik GmbHbased in AUSTRIA
Depending on the fuel, size of the plant and the customer’s requirement, the flue gases from biomass energy plants are cleaned before they are directed outside via the chimney ...
-
Manufactured by DrySoTec GmbHbased in GERMANY
In the process of dry flue gas cleaning, the flue gas, if necessary, is moistened and cooled upstream of the actual reaction stage. This is done, on the one hand, for protecting the filter (temperature) and, on the other hand (if lime is used), for moistening the flue gas up to the dew point ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The flexibility of the IMR 5000 CEMS allows it to offer an endless set of possibilities to measure different parameters like CO, CO2, NO, NO2, CH4, HC, NH3, Cl2, HCl, H2, O3, SO2, H2S, O2, Velocity, Draft, Dust, Temperature and other parameters on ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 5000 is state-of-the-art Continuous Emission Monitoring System, and is designed for a wide variety of stationary emission monitoring applications. The IMR 5000 is a stand-alone analysis system that works automatically. Available in a 19” rack mount or rugged wall mounted enclosure. The wall mount enclosure meets NEMA type 4X (IP65) standards. The modular approach of the IMR 5000 ...
-
Manufactured by E.I.Tec. GmbH Energy and Environmental Technologybased in GERMANY
In general, there are two procedures available which can be implemented depending on flue gas conditions. Non-selective catalytic reduction processes are based on the injection of a reactive agent without using an activating catalytic ...
-
Manufactured by TREMA Verfahrenstechnik GmbHbased in GERMANY
Flue gas conditioning. Production of diverse powders of a defined particle size. Single- or dual media nozzle atomizers or rotary wheel atomizers. Zero-effluent flue gas cleanup. Evaporation of scrubber effluents to produce a dry residue suitable for land ...
-
Manufactured by Hitachi Zosen Inova AGbased in SWITZERLAND
reagent consumtion, lowest residue generation, highest energy efficiency and most compact design. Both the dry scrubbing and the SCR DeNOx processes operate at the same temperature avoiding energy and head losses for flue gas conditioning. Maximum heat can be recovered prior to and after the Xerosorp+ ...
-
Manufactured by Blue Sky Technology Co. Ltdbased in CHINA
Using the highest quality fiber materials and world-class needling techniques and equipment, HL Filter manufactures a wide range of Aramid (NX) needle felts with high dust-holding capacity and good air permeability. In general Aramid tends to be gradually degraded under hostile flue gas conditions. Consequently filter media made of ...
-
Manufactured by IACbased in USA
Many of our customers have plant processes that require flue gas stream conditioning for wet particulate matter for desulfurization of liquid droplets. For these customers, IAC offers engineering design, fabrication, and installation of Wet Electrostatic Precipitator (Wet ESP) Systems. A wet electrostatic precipitator is a type of dust ...
-
Manufactured by Unicon Engineersbased in INDIA
Ammonia Flue Gas Injection System to Reduce SPM Level in Coal Fired Boiler ESPs. UNICON Group, entered in to a Memorandum of Understanding (MoU) with HWB-Department of Atomic Energy, for transfer of Ammonia Flue Gas Conditioning Technology. This technology will reduce the SPM level for Coal based Thermal Power ...
-
Manufactured by Envirocare International, Inc.based in USA
Evaporative Gas Conditioning (EGC) is a technique for conditioning flue gas prior to electrostatic precipitators or fabric filters to reduce gas volume, lower the temperature, and improve particulate collection. Finely atomized water is evaporated in the gas stream to lower its ...
-
Manufactured by Zhangqiu Blower Co., Ltd.based in CHINA
ZGTX series corrosion-resistant and wear-resistant desulfurization pump is based on the actual characteristics of China's wet flue gas desulfurization conditions. Based on the absorption and analysis of the advantages and disadvantages of similar products at home and abroad, it is jointly developed with Tsinghua University to develop a ...
-
Manufactured by LABbased in FRANCE
SecoLAB is an efficient dry system based on sodium bicarbonate or lime ...
-
Manufactured by RAFAKO SAbased in POLAND
Currently RAFAKO offers a wide range of flue gas desulphurisation plants meeting various customers requirements. The methods can be classified according to sorbent form as well as reaction location and end ...
-
Manufactured by Tecorabased in FRANCE
The GA Series analyzers can analyze your flue gases. They combine sample conditioning (heated filter, heated pipe and dryer) with the measurement of various gases in a single instrument. The range offers a variety of instruments for different applications and budgets, from the hand-held analyzer that can measure 2 to 3 different ...
-
Manufactured by Royal Dahlman BVbased in NETHERLANDS
The FCC process requests to be operated 24 hours a day and as such, the reliability and availability is of critical importance. Royal Dahlman's Catalyst Hopper Vent Gas Filters can be operated without any shutdowns in between two TAR's. Fluid catalyst is continuously circulated between the FCC reactor and the regenerator using air, oil ...
-
Manufactured by ENOTEC GmbHbased in GERMANY
Install, Power Up and Measure Oxygen - No bottle gas and no continuous instrument air supply required for operation and regular verification. Decades of experience in design and construction of highest quality analyzers have resulted in the ENSITU® 7000, a budget friendly O2 transmitter probe, made by ENOTEC. Being able to withstand high ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you