Only show results available in Virginia? Ok

flue gas emissions Equipment

  • Premium

    E Instruments - Model E6000 - Hand-Held Industrial Combustion Flue Gas & Emissions Analyzer

    The E6000 is a NEW hand-held industrial combustion flue gas and emissions analyzer that can have up to six gas sensors. The E6000 is an innovation portable emissions monitor for accurate measurements of stack gases from combustion processes including boilers, burners, gas and diesel engines, turbines, furnaces

    By E Instruments International, LLC based in Langhorne, PENNSYLVANIA (USA). from Industrial Emissions Analyzers Product line

  • Flue Gas Emission Monitoring System

    Flue gas emission monitoring for the flue gasses leaving the flue gas emission reduction system of the ROTARY KILN INCINERATOR is required to ensure that final emissions comply with the applicable regulations. Emissions are typically monitored on a continuous basis (CEMS, continuous emission control system); results are represented in the central ...

    By Dutch Incinerators BV based in Sint Jansteen, NETHERLANDS. from Rotary Kiln Incinerators Product line

  • Premium

    Model VCEM5100 - Flue Gas Flow Monitor

    The VCEM 5000/51000 represents the latest generation of CODEL’s uni ue flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime ...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Flow Monitors for Stack Emissions Product line

  • Premium

    Tekran - Model 3321 - Oxidizer Module for Wall Mounted Sample Conditioner

    The Tekran Model 3321 Wall Mounted Sample Conditioner can be configured to supply Ionic Mercury Calibration Gas to the 3300Xi Hg CEM system. The calibration source allows both multi-point calibrations and standard additions to be automatically initiated. The unit generates concentrations of ionic mercury by oxidation elemental Hg output from the ...

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA). from Flue Gas CEM Product line

  • Premium

    Model GCEM40 - Single or Multi-Channel In-situ Flue Gas Analyser

    The GCEM40 series is our latest generation of in-situ gas analysers. Designed for use primarily on combustion processes the analysers measure the key pollutants such as CO, NO, NO2, NOx, SO2, CH4, HCl, CO2 and H2O.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM. from Safety & Performance Product line

  • Premium

    Environnement S.A - Model STACKFLØW 400 - Flue Gas Flow Measurement System

    The STACKFLØW 400 is an advanced flue gas flow measurement system for continuously monitoring releases from industrial sources complying with European monitoring standard EN 16911-2:2013 and 15267-3.

    By Environnement S.A based in Poissy, FRANCE. from Measuring System - Stack Flow Meter Product line

  • Portable Flue Gas Analyzers

    ENCO offers a complete range of latest technology and high quality portable flue gas analyzers, from handheld instruments for spot measurements to heavy duty industrial versions capable for long term measurements using combined electrochemical cell and InfraRed technology. We offer a competent technical support including continuous availability of ...

    By ENCO LTD based in Athens, GREECE. from Industrial Emissions Product line

  • Model GA-5000M - Flue Gas Analyzer/Detector OEM Module

    It is used for measuring harmful gas composition from pollution discharge pipes, mainly used for departments of environmental monitoring and thermal parameter measurement. It's used to monitor harmful gas concentration of SO2, NO, NO2, etc. Compared with the instrument using electrochemical sensor measurements, it has higher accuracy, higher ...

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • Flue Gas Recirculation Systems

    M-E-C Flue Gas Recirculation (FGR) Systems utilize the rflue gas systemecycled dryer exhaust gas to recover thermal energy and reduce the need for emission abatement machinery. This process minimizes the size of the emission abatement machinery, thereby reducing investment and operating expenses. M-E-C FGR Systems can be designed for new drying ...

    By M-E-C Company based in Neodesha, KANSAS (USA). from Emission Abatement Solutions Product line

  • IM - Model 1440H - Ideal Combustion Analyzer

    The IM 1440H is the ideal combustion analyzer for professional emission testing! the IM1440H is easy to use and still very rugged. It measures not only all the needed parameters but it also has an automatic pressure test to test gas pipes.

    By IM Environmental Equipment Germany GmbH based in Heilbronn, GERMANY. from Flue Gas Analysis Product line

  • Small or Medium Sized Boilers

    The emission requirements for district heating and combustion of biomass fuels often demand a very efficient Flue Gas Cleaning. Even small heating plants have to meet emission requirements of max. 20 mg/Nm³ or even lower values.

    By Simatek A.S based in Soroe, DENMARK. from Flue Gas Cleaning Product line

  • Model HZI - Semi Dry Scrubber

    The HZI SemiDry process employs the principle of the circulating fluidized bed for efficient removal of acid gases by adsorption with hydrated lime. Recirculation of reagent maximizes reagent use and provides excess reagent to capture contaminat peaks. In addition, activated carbon or coke can be injected for removal of volatile organics and ...

    By Hitachi Zosen Inova AG based in Zurich, SWITZERLAND. from Flue Gas Treatment Product line

  • Xerosorp - Dry Scrubber

    The Xerosorp process removes acidic gases by adsorption with sodium bicarbonate. Due to the very high reactivity of sodium bicarbonate, only little overdosing is required which minimizes reagent consumption and residue generation. In addition, activated carbon or coke can be injected for removal of volatile organics and metals. The process is ...

    By Hitachi Zosen Inova AG based in Zurich, SWITZERLAND. from Flue Gas Treatment Product line

  • Xerosorp+ - Scrubber

    The Xerosorp+ Process Combines the Advantages of the Dry Scrubbing Process and Low Temperature SCR-DeNOx System. The Xerosorp+ process is the optimized combination of the Xerosorp and the low temperature SCR-DeNOx processes. If highest removal efficiencies are required for ash, acid gas and NOx, the Xerosorp+ process is the solution with lowest ...

    By Hitachi Zosen Inova AG based in Zurich, SWITZERLAND. from Flue Gas Treatment Product line

  • CUTNOX - Waste to Energy Plant

    We can provide CUTNOX for the reduction of NOx products from incinerator processes as stand-alone units for installation in existing or new furnaces. We offer SCR primarily as an integrated part of a complete flue gas cleaning system.

  • Model HZI - Wet Scrubber

    Wet scrubbing is the most effective method for removing acid gases from even heavily burdened flue gases and achieving lowest emission levels. It also assures excellent removal of fine particulates and aerosols. Consumable usage rates and residue quantities are minimised. The contaminants are captured by providing intensive contact between the ...

    By Hitachi Zosen Inova AG based in Zurich, SWITZERLAND. from Flue Gas Treatment Product line

  • Model BA 2000 / BA 2000-MF / BA 2000-SE - Oxygen Flue Gas Analyzer

    In combustion applications such as process heaters, steam generation boilers or furnaces, the amount of air needed to reach optimum system efficiency can vary rapidly. The optimum heat rate for these units, which may lie within narrow limits, can be achieved with the BA2000.

    By Bühler Technologies GmbH based in Ratingen, GERMANY. from Gas Analysis - Analysers Product line

  • Flue Gas Cleaning Equipment

    The emission requirement from the authorities has been tightened  dramatically in the last 10 years.This means that we at Jernforsen also provide equipment for flue gas cleaning for our plants. This is done through three different technologies in order to meet our customers' financial needs and the regulatory requirements.

    By Jernforsen Energi System AB based in Halmstad, SWEDEN.

  • Flue Gas Conditioning Plant

    Flue gas conditioning is the controlled injection of small quantities of sulfur trioxide into the flue gas stream, reducing the resistivity of the fly ash and permitting its collection in the existing precipitator. When flue gas conditioning is installed on units that have switched to lower sulfur coal, solid emissions are significantly reduced, ...

    By Pentol-Enviro AG based in Basel, SWITZERLAND. from Coal Fired Plants Product line

  • Flue Gas Treatment System

    Depend on the environmental and economical request we design the flue gas treatment. Two principal of adsorption came to the fore, wet and dry adsorption. In case of emission there are mainly to standards requested: US EPA Standard, European Standard according the Guideline 2000/76/EC, Mostly both of the standards can be achieved by a dry or wet ...

    By Joseph Egli AG based in Oberurnen, SWITZERLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you