Incinerator (Flue Gas) Equipment
-
Manufactured by Igniss Energybased in POLAND
Scrubbing is flue gas treatment of poluted flue gases by chemical reaction, like gasses from incineration processes are chemically treated before leaving the chimney. When water (and for example caustic soda - NaOH) is used to clean the flue gas, it is called "wet scrubbing". When there is no water present, the flue gas treatment is named ...
-
Manufactured by CarbUSA LLCbased in USA
Incineration method is widely used for eliminating of sewage sludge and house hold waste. During the process it eliminates toxic products like dioxins , furans heavy metals like mercury and eco toxic organic components like PCB’s granular activated carbon for fixed bed filters. CarbUSA offers wide range of and powered activated ...
-
Manufactured by Addfield Environmental Systems Limitedbased in UNITED KINGDOM
The Addfield wet scrubber system is primarily designed as particle suppressant system, ideally suited to high capacity incineration machines. Heavy particulates are removed from the exhaust gas using water injected from the roof of the scrubber system. This bolt on system can be added to any incineration machine in the Addfield range and is ...
-
Manufactured by Sutco RecyclingTechnik GmbHbased in GERMANY
. The Sutco plant ensures a uniform utilization and working temperature by feeding a constant input. Among others, this optimizes the incineration process, lowers peaks of harmful substances in the flue gas and reduces process faults caused by hot/cold furnaces. A clean ...
-
by Greenex Ecobased in GERMANY
Our stationary waste utilization complex is equipped with a modern sorting line, combined with our incineration modules. The stationary incinerators ECO 1000 – 5000 provide bigger scaled solutions for the treatment of up to 45 tons of waste per ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's FIRECAT Thermal Oxidizers are simplest combustion devices that uses natural draft or forced draft burners and designed to maintain a specific destruction temperature and residence time to ensure thorough destruction efficiencies (98-99.99%). A FIRECAT system precisely monitors and controls the flow of air, assist gas, in order to obtain prescribed temperatures in the combustion chamber. ...
-
Manufactured by Ing.Gallaratibased in ITALY
These are big inclined (sloped) rotating furnaces with medium and big inner volume, with continuous loading by means of different loading systems, depending on the type of the waste, and are always fitted with automatic ash discharge; they are suited to burn municipal waste (MW or RSU), hospital waste in cardboard boxes or in plastic bags or drums (ROT), special industrial waste, hazard waste, ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Automatic Dioxin Sampling System GT90 Dioxin+ is a future-proof solution for a long-term sampling of dioxin emissions in conformity to the European standards EN1948-1 and EN15267. The system represents the cutting-edge technology for dioxin sampling and fulfills all the requirements of the dioxin measurement ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Ceramic Filtration is one of the best processes for handling flue gases at high temperatures. Utilising. After many years in the industry with a track record second to none we have become the company that existing and new clients from around the world come to for their incineration solutions. On top of supplying a range of standard models we ...
-
ShowcaseManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Our flagship model is the i8-1000 line. It took over three years to develop and is at the forefront combustion technology, offering impressive burn rates and large batch sizes while still achieving some of the lowest emissions in its class. The i8-1000 can be customised with external cladding and automatic loading/de-ash to provide an effective and sustainable waste disposal solution for many ...
-
PremiumManufactured by ENVEAbased in FRANCE
chemistry. The SM-4 Mercury Monitor is QAL1 certified and is ready to meet future regulatory requirements (Minamata convention & European directives for thermal power plants and ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
: coal-fired power plant, waste incineration power plant, chemical plant and so on ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
dedusting by sampling probe, tracing by heating pipe, dehydration and cooling by two-step condensing, the measured gas is analyzed by the heated gas analysis module (TDLAS and DOAS technique). It is an effective solution to solve the technical problem that large humidity variation of the waste incineration and other occasions lead to measuring ...
-
PremiumManufactured by ENVEAbased in FRANCE
The QAL 260 series is suitable for measuring dust concentrations in Combustion, Incineration and other industrial stacks and is compliant with EN 14181. Having a 0-15 mg/m³ certification range, the QAL 260 sensor can be used at low or high dust levels. Due to dynamic ranging, the sensor is also suitable for much higher dust levels ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The flexibility of the IMR 5000 CEMS allows it to offer an endless set of possibilities to measure different parameters like CO. C02, NO. X02, CH4, HC, NH3, C12, HC1, H2, 03, S02, H2S, 02, Velocity, Draft, Dust, Temperature and other parameters on ...
-
PremiumManufactured by ENVEAbased in FRANCE
TUV QAL1 and MCERTS Approved, Stand alone or networked system option Particulate CEM providing high quality emission measurement for dust concentrations from industrial processes. Having a 0–7.5 mg/m³ certification range, the QAL 360 sensor can be used at low or high dust levels meeting the tightened minimum emission limit value of 5 mg/m³ for Large Combustion Plant specified in ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The New Tekran 3300Xi has the same proven components of the successful Tekran 3300. The Tekran 3300Xi is modular, simpler to install and maintain, includes the new Tekran 2537Xi detector and is operated with updated CEM+ software (Tekran 3321 pictured). The 3300Xi is the ideal platform for inlet- outlet control technology optimization, regulatory monitoring of mercury emissions and bench-scale ...
-
PremiumManufactured by For.Tec. Forniture Tecnologiche S.r.l.based in ITALY
The respect for the environment is one of the main commitments of For.Tec., which constantly develops and updates the technologies for reducing emissions into the atmosphere to be installed on incineration and cremation facilities, that are built ...
-
PremiumManufactured by ENVEAbased in FRANCE
US EPA PS11 compliant ProScatter™ particulate CEM providing high quality emission measurement for low dust concentrations from industrial processes. Utilising the patented ProScatterTM Forward Scatter measurement technique for measuring particulate concentration levels, typically between 0.06 mg/m3 to 300 mg/m3, this measurement technique offers improved levels of performance which make the ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 approved particulate CEM which meets US EPA PS-1 requirements for Opacity monitoring from combustion stacks. Robust multi corner cube reflector provides truer reflection of transmitted light compared to traditional “mirror type” reflectors providing greater confidence in measurement. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you