Gas Emissions Monitoring Applications available in Jamaica
-
Premium
Gas monitoring instruments and systems for DeNOx process control
In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Continuous emissions monitoring solutions for H2S monitoring
To monitor H2S can be difficult. The UV absorption is without structure and the IR absorption has strong interference from H2O. The traditional way has been to remove all SO2 from the sample while keeping H2S, then convert H2S to SO2 ,and finally measure SO2 which then effectively yields the H2S concentration. The instruments used have often been ambient air SO2 analysers and extractive dilution systems. However, it is not unusual to experience practical problems with these type of ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Emissions Monitoring for Mining / Emissions Monitoring for Smelting
The Opsis monitoring solution for mining and smelting applications is based on either DOAS or laser diode technique. Opsis non-contact monitoring solutions are very well suited for applications in the Mining and Smelting Industries, as the flue gas conditions often involves high temperatures and high dust concentrations. The on-line, open-path systems are used for monitoring HF, sulphur dioxide, SO3 and HCl in potrooms, in fence-line applications and in continuous emissions ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Continuous emissions monitoring solutions for mercury monitoring
Waste incinerators, cement plants and power plants need good and reliable measurements of total gaseous mercury. The measurement of total gaseous mercury is a challenge due to chemical reactions and contamination. The installed systems will often require a lot of maintanence still not giving reliable ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
As exhaust emissions from engine tailpipe have been decreasing in recent years through development of engines and exhaust after-treatment systems, non-exhaust emissions have become a major contributor to total particle emissions from vehicles. Numerous studies have shown that non-exhaust emissions can equal or even exceed those from the exhaust, and we have a measurement system for both types of emissions. Also, the discussions around Euro 7 emission standards has increased the interest and need for non-exhaust ...
By Dekati Ltd. based in Kangasala, FINLAND.
-
Premium
Waste Incineration Application Note
Waste incineration is commonly used to dispose of the organic components of both domestic refuse and hazardous waste by burning it under controlled conditions. The heat generated in this process can be used to generate electricity, a process known as Waste-To-Energy (WTE). Because they have the potential to release highly toxic chemicals, such as polyaromatic hydrocarbons (PAH) and heavy metals, waste incinerators are subject to stringent environmental regulations.Temperature and emissions monitoring equipment ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Premium
Gas Analyzers for Power Plant Application
As the world pushes for an increased focus on clean energy and sourcing, power plants need to consider every aspect of their operation that impacts ...
By Enviro Solutions Technology Co.,Ltd based in Wuhan, CHINA.
-
Premium
Gas monitoring instruments and systems for stack testing
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Stack gas emission monitoring for the energy industry
By J.U.M. Engineering GmbH based in Karlsfeld, GERMANY.
-
Premium
Marine monitoring solutions
Marine monitoring is a variant of OPSIS general offers for continuous emissions monitoring (CEM) and process control. The special operating conditions on-board vessels call for special measures to comply with regulations and expectations. However, OPSIS has mastered this environment and has for many years successfully delivered systems for marine ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Process Flue Gas Monitoring for Combustion Optimization Application
Combustion in boilers, gas turbines, waste to energy, paper-mills, minerals, etc. | MIR 9000e Customer: Any industry having a stake in improved combustion technologies Material measured: Combustion flue gases Installation: At the boiler outlet Function: Reliable and accurate monitoring of O2 and CO for combustion control optimization ...
By ENVEA based in Poissy, FRANCE.
-
Gas detection analyzers solutions for chemical & pharmaceutical processes industry
Chemical and pharmaceutical facilities use a variety of hazardous gases and solvents in their production processes. Whenever these substances are transported, processed or stored, the potential risks are high for hazardous conditions. These substances must be continuously monitored to protect personnel and facilities from accidental releases or leakage. ...
By Control Instruments Corporation (CIC) based in Fairfield, NEW JERSEY (USA).
-
High quality gas sensor solutions for landfill
State-of-the-art systems enabling easy monitoring of CO2 and CH4 gases. A landfill site is a site for the disposal of waste materials by burial. Historically, landfills have been the most common method of organised waste disposal and remain so in many places around the world. Some landfills are also used for waste management purposes, such as the temporary storage, consolidation, and transfer, or processing of waste materials. Landfill gas is created by the action of microorganisms within a landfill. This includes ...
By Edinburgh Sensors Ltd - TECHCOMP Group based in Livingston, UNITED KINGDOM.
-
Gas Monitoring Solutions for Cargo Container Safety
Each year millions of containers arrive in ports around the globe. Typical international cargo has to travel for a long time in varying temperature and humidity conditions. Even though it may be inspected and considered to be safe prior to leaving its destination, hazardous chemicals and fumigants can off-gas during the transit. The combination of sealed containers and long journey times means that chemicals can build to a level that would never normally be encountered in domestic or industrial settings. In the ...
By Gasera Ltd based in Turku, FINLAND.
-
Gas monitoring for landfills
The Kurz Insertion Mass Flow Meter products provide extremely reliable and accurate measurements with a number of features specifi cally tailored for landfi ll gas monitoring ...
By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).
-
Monitoring solutions for the marine industry
While land-based industry has been subject to strenuous emissions regulations over the past decades, air emissions from sea-going ships’ machinery has so far been largely unregulated. As a result, according to EU statistics, ships have become the single biggest source of sulphur dioxide (SO2) within the EU. The US EPA (US Environmental Protection Agency) reports similar findings, i.e., that the proportion of air pollutants released which can be attributed to the shipping industry is increasing. MARPOL Annex ...
By Codel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM.
-
Automobile emission gas analyzer solution for vehicle emission gas detection
Automobile emission gas analyzer solution for vehicle emission gas ...
By Hubei Cubic-Ruiyi Instrument Co., Ltd. based in Wuhan, CHINA.
-
Ground-Gas Monitoring Technology for Land Remediation
The continuous ground gas data collected using the GasClam provides landowners, developers and consultants with a detailed understanding of the ground gas regime on their sites. Sites that show significant gas emissions can be monitored over the long-term to ensure risks are fully understood before and after remedial action is ...
By Salamander Group based in Ulverston, UNITED KINGDOM.
-
Ground-Gas Monitoring Technology for Environmental
GasClam® currently has a wide range of applications where continuous gas monitoring is advantageous ...
By Salamander Group based in Ulverston, UNITED KINGDOM.
-
Gas detection analyzers solutions for oil & gas industry
The Oil & Gas industry is composed of three major components: upstream, midstream and downstream. The upstream industry finds and produces crude oil and natural gas. The midstream industry processes, stores, markets and transports commodities such as crude oil, natural gas and natural gas liquids. The downstream industry includes the oil refineries, petrochemical plants, petroleum product distributors and natural gas distribution companies.All of these operations contain many processes that require monitoring ...
By Control Instruments Corporation (CIC) based in Fairfield, NEW JERSEY (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you