Gas Purification Equipment For Air And Climate In Latin America
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
-
PremiumManufactured by Advanced Cyclone Systems, S. A. (ACS)based in PORTUGAL
Cyclones have been mostly designed and improved by empirical means. Computerized Flow Dynamics (CFD) can be used for partial cyclone optimization but it is still incomplete for full cyclone optimization. The fact that particle agglomeration for cyclone modelling has been disregarded until present days is one of the reasons for notably low collection efficiency results. This knowledge has helped ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The BgPur system is our proven solution for biogas treatment from anaerobic digesters and landfill. The system reduces hydrogen sulfide (H2S) concentrations and converts it to solid elemental sulfur for resale. The system uses a liquid chemical catalyst, compact gas/liquid contactor, and solids removal system and does not consume the chemical catalyst driving the conversion of H2S to sulfur, ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The SFC-50 from Sepiatec is a compact and easy-to-use chromatography system for preparative separations on small columns by means of supercritical fluid chromatography (SFC). The system offers the comprehensive benefits of SFC technology, such as faster separations, lower costs due to reduced consumption of organic solvents, as well as being more environmentally friendly at increased ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
The Flottweg Sedicanter for processing fine-grained, past-like products. Flottweg produces a special decanter centrifuge for soft, easy-flowing sediment. The Flottweg Sedicanter separates solids from liquids. The special thing about it: The solids consist of a soft to easy-flowing sediment. Soft or easy-flowing solids are difficult to process with a standard decanter. Only the patented Flottweg ...
-
PremiumManufactured by Advanced Cyclone Systems, S. A. (ACS)based in PORTUGAL
ACS holds a patent of a recirculation system to increase the efficiency of cyclones. A mechanical ReCyclone® (ReCyclone® MH) is made up of a high efficiency Hurricane and a particle separator, placed downstream, called the “mechanical recirculator” (please see figure). In 2016, ACS introduced more compact recirculators that can be placed on top of cyclones, exempting the need ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The SFC-660 system, developed by Sepiatec, represents a powerful solution for preparative separations by means of supercritical fluid chromatography (SFC). The unit has been designed for flow rates of up to 660 ml/min at a modifier portion of 40 %. All the advantages of SFC technology are combined: Quick separation, a reduced consumption of organic solvents and thus cost, increased safety and an ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Sepiatec’s SFC-M5 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The system is available in the product variants M5 50 and M5 250. The SFC-M5 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Stand-alone unit as customised solution for handling large gas quantities. Special features/Process: Evacuation of air. Filling of the gas compartment. Recovery of gas. Venting the gas compartment. Separated air and gas circuit to avoid the contamination of the gas with ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Sepiatec’s new SFC-250 system is a compact benchtop unit designed for preparative separation using supercritical fluid chromatography. Measuring just 72 x 60 x 88 cm (W x D x H) the system offers all advantages of SFC technology such as fast separation, reduced consumption of organic solvents, lower costs, improved environmental compatibility and increased ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The SgPur system is specifically designed to treat sour gas from oil and gas operations. The system reduces hydrogen sulfide (H2S) concentrations and converts it to solid elemental sulfur for resale. The system uses a liquid chemical catalyst, compact gas/liquid contactor, and solids removal system and does not consume the chemical catalyst driving the conversion of H2S to sulfur, minimizing ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilcosep was designed to remove moisture and particulate contamination from steam and gas turbine lube oils. Self-sufficient stand-alone models with reservoir capacity ranging from 2,000 gallons to 12,000+ gallons and portable models as well as custom designs are ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Sepiatec’s SFC-M5 50 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The SFC-M5 50 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module can be equipped with up to three high pressure pumps, a CO2 ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Water-cooled heat exchanger. Cooling in continuous operation. Circulation pump for water cooling: 30 m³/min. Gas purification via particle filter (pore size 1 µm). Cooling capacity: ~ 45 kW. Operation via touch panel. Optional oilfree compressor 11.4 m³/h with 30 l dry filter for gas ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Bubble Separator from Particle Measuring Systems is a welded PFA device that allows entrained bubbles in an ultrapure water (UPW) or process chemical sample to separate from the sample stream through buoyancy, prior to the sample entering the liquid particle counter. The UPW or chemical sample 1) enters the middle of the bubble separator and 2) separates at the tee, with 3) the liquid sample ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Sepiatec’s SFC-M5 250 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The SFC-M5 250 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module can be equipped with up to three high pressure pumps, a ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Spectrum plus filter uses two effective layers to achieve a greater level of performance. Nutshell media filters are commonly used in the treatment of produced water to reduce the oil and solids content of the water prior to injection for Enhanced Oil Recovery (EOR) or prior to subsequent treatment such as softening the water as feed to steam generators used in heavy oil production. However, ...
-
Manufactured by AGC Instruments Ltd.based in IRELAND
The AGC Hydrogen Removal System solves the problem in trace analysis of Hydrogen. It is an alternative to using very long columns or heartcut chromatography which can result in slower analysis times. With Hydrogen, the best way to find the impurities is simply to remove the bulk gas, leaving only the impurities ...
-
Manufactured by Franke-Filter GmbHbased in GERMANY
Oil Mist Eliminators for gas and diesel engines maintain a constant vacuum in the crankshaft housing. Due to fluctuations in the crankshaft housing, your Oil Mist Eliminator is equipped with a frequency converter. The pressure transducer records pressure and transmits it to the side channel vacuum pump. By alteration of the rotation speed of the side channel vacuum pump the vacuum and suction ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
Single and multi-lane strand furnaces: Carbolite Gero can supply units to process a single strand. However, for cost efficient production furnaces with up to eight lanes are offered as standard and additional lanes can be added (up to a maximum of 22). The furnace length is determined by the throughput requirement. The strand passes through Inconel or ceramic tubes and, where required, under the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you