Gas Purification Equipment For Air And Climate Near Africa
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Along with the supply of a GE Jenbacher cogeneration plant, Clarke Energy can provide exhaust gas catalysts for the scrubbing of exhaust gases. Exhaust gas purification systems are able to reduce harmful exhaust gases by up to 95%. The exhaust gas purification system can consists of up to three consecutive stages, depending on the requirements of the application, to purify the exhaust gases: The ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Water-cooled heat exchanger. Cooling in continuous operation. Circulation pump for water cooling: 30 m³/min. Gas purification via particle filter (pore size 1 µm). Cooling capacity: ~ 45 kW. Operation via touch panel. Optional oilfree compressor 11.4 m³/h with 30 l dry filter for gas ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Stand-alone unit as customised solution for handling large gas quantities. Special features/Process: Evacuation of air. Filling of the gas compartment. Recovery of gas. Venting the gas compartment. Separated air and gas circuit to avoid the contamination of the gas with ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
The Infinity 1045 compressorless nitrogen generator has been specifically designed to supply the Bruker EVOQ Triple Quadrupole Mass Spectrometer with carrier nitrogen gas and a separate dry air ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Sepiatec’s new SFC-250 system is a compact benchtop unit designed for preparative separation using supercritical fluid chromatography. Measuring just 72 x 60 x 88 cm (W x D x H) the system offers all advantages of SFC technology such as fast separation, reduced consumption of organic solvents, lower costs, improved environmental compatibility and increased ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Sepiatec’s SFC-M5 50 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The SFC-M5 50 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module can be equipped with up to three high pressure pumps, a CO2 ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Sepiatec’s SFC-M5 250 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The SFC-M5 250 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module can be equipped with up to three high pressure pumps, a ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Sepiatec’s SFC-M5 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The system is available in the product variants M5 50 and M5 250. The SFC-M5 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The SFC-660 system, developed by Sepiatec, represents a powerful solution for preparative separations by means of supercritical fluid chromatography (SFC). The unit has been designed for flow rates of up to 660 ml/min at a modifier portion of 40 %. All the advantages of SFC technology are combined: Quick separation, a reduced consumption of organic solvents and thus cost, increased safety and an ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The SFC-50 from Sepiatec is a compact and easy-to-use chromatography system for preparative separations on small columns by means of supercritical fluid chromatography (SFC). The system offers the comprehensive benefits of SFC technology, such as faster separations, lower costs due to reduced consumption of organic solvents, as well as being more environmentally friendly at increased ...
-
Manufactured by Bruker Corporationbased in USA
Innovative design with product reliability has produced an extensive range of gas filters configured for the most demanding applications. Bruker Gas Purification Systems have the range to satisfy your needs from individual to combination filters, from Ultra purity combined with Ultra capacity, to all in one solutions. Innovative features designed into the product yield extensive benefits to the ...
-
Manufactured by Verder Scientificbased in GERMANY
The new carbon / sulfur analyzer ELEMENTRAC CS-i was developed for the accurate and safe analysis of carbon and sulfur in inorganic samples. The analyzer is equipped with a powerful induction furnace for sample ...
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
For heated gas sampling from up to 4 separate sample points, Protea’s Heated Stream Selection Module (HSSM) is a ready to use 19" rack interface that can be used with Protea’s range of multigas FTIR analysers or any other industrial gas ...
-
Manufactured by Muntersbased in USA
Munters DPV is a double pocket type vane type separator for service in high velocity and high liquid removal applications. It is part of Munters series of high performance vane type separators (DH5000 and DPV) with elevated K-values. Specially designed drain channels collect the liquid which flows away under the influence of gravity. So-called double pocket vane type separators drain the captured ...
-
Manufactured by Muntersbased in USA
Munters Easy Flow enables to master critical process conditions where there is either a high solid content in the gas thus a high risk of clogging or where there is a very high variance in the flow conditions leading to local malfunctions in the separation. This innovative technology concept increases the service life of coarse and fine separators in gas cleaning devices and equalizes uneven gas ...
-
Manufactured by Muntersbased in USA
The DV Series droplet separators are a vane type separators. The gas flow charged with liquid droplets is directed through separator chambers which are designed for maximum effect on the gas ...
-
Manufactured by AGC Instruments Ltd.based in IRELAND
The AGC Model 75-802 Carrier Gas Purifier ensures a stable supply of purified gas for efficiency and costeffectiveness in gas chromatography systems. The original version of this refined instrument is the Bench Mount Purifier from AGC Instruments which is easily integrated with new or existing set-ups to work in tandem with numerous applications. This configuration links seamlessly with the AGC ...
-
Manufactured by AGC Instruments Ltd.based in IRELAND
The Model 23-502, uses the Flame Ionisation Detector (FID), which measures Hydrocarbons present in a sample ...
-
Manufactured by AGC Instruments Ltd.based in IRELAND
For % measurement of two gases, the 20 Series Binary Stream Gas Analyser is the workhorse unit which is easily adapted for the many applications that they need to be used. If you want an instrument for non-continuous analysis of a binary mixture in an Industrial Gas process, or a gas mixing application to identifying the contents of a gas cylinder, then the 20 Series Gas Analyser using the latest ...
-
Manufactured by AGC Instruments Ltd.based in IRELAND
The AGC Model 75-804 Carrier Gas Purifier ensures a stable supply of purified gas for efficiency and costeffectiveness in gas chromatography systems. The latest revision of this refined instrument is the automated 19” Rack Purifier from AGC Instruments which is easily integrated into new or existing set-ups to work in tandem with numerous applications. The new rack configuration links ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you