Gas Sampling Equipment For Air And Climate In Taiwan
-
ShowcaseManufactured by Synspec BVbased in NETHERLANDS
Continuous emissions monitoring system (CEMS) for high-range stack measurements. Synspec Delta 116 is a continuous emissions monitoring system (CEMS) built specifically for high-range stack measurements according to US EPA 25A. The analyser provides the sum of all other hydrocarbons in the same measurement cycle for better determination of the total air pollution. The method utilised ensures that ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Ideally suited for aseptic environments, the MiniCapt Remote Microbial Air Sampler simplifies the job of microbial air sampling by applying modern data management capabilities that save time and reduce operator error in air sampling data. The MiniCapt Viable Microbial Sampler uses a unique HEPA-filtered exhaust so it doesn’t contaminate the cleanroom. With a small footprint, the MiniCapt ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
High-technology manufacturing processes often require high-purity gases. The HPGP-101-C High Pressure Gas Probe System provides reliable in-line contamination monitoring for process gases at line pressure. The High Pressure Gas Probe System is compatible with oxygen, hydrogen and most non-toxic gases, and it can be used in many reactive gas monitoring applications. The High Pressure Gas Probe ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Ambient air quality is critical for our health and the environment. MARGA is a fully autonomous sampling and measurement system that continuously measures the water-soluble gas and aerosol components that have a direct effect on air quality. These results can then be used to study the formation of aerosols from their precursor gases and how their concentration and composition vary with ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 3750-2 basic ventilation system (dual gas) and Innova 3750-5 basic ventilation system (multi-gas) offer fully integrated gas monitoring solutions. They enable accurate tracer gas methods and are ideal for ventilation performance studies or ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Andros 6500 and 6520 gas analyzers offer unparalleled accuracy and performance via simplified design and implementation. Unlike analyzers that require moving components, the 6500 and 6520 use pulsed-infrared sources to achieve high accuracy and reliability. Highly accurate calibration. High stability and rapid warm-up. Unique optical architecture. Comprehensive software ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 3751-2 basic ventilation system (dual gas) and Innova 3751-5 basic ventilation system (multi-gas) offer fully integrated gas monitoring solutions. They enable accurate tracer gas methods and are ideal for ventilation performance studies or ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 875 KF Gas Analyzer is a completely configured analysis system. The instrument contains a computer with tiamo™ full titration software installed in addition to an 851 Titrando for automatic coulometric water content determination. Predefined methods for water content determination in liquefied and permanent gases facilitate work with the 875 KF Gas Analyzer. In addition to determining ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 1409 is a reliable, easy-to-use multipoint sampler for gas sampling of up to 24 different locations. The Innova 1409 is designed to be remotely controlled from a PC using a USB interface in conjunction with an Innova Photoacoustic Gas Monitor to provide a flexible, sensitive, and accurate monitoring ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The MiniCapt Mobile Microbial Air Sampler is an innovative, light and mobile air sampler. It simplifies the job of microbial air sampling by applying modern data management capabilities that save time and reduce operator error in air sampling data. The MiniCapt Mobile Air Sampler makes the job easier by incorporating a capacitive and sliding touchscreen, allowing easy use with gloves without the ...
-
PremiumManufactured by ENVEAbased in FRANCE
The Cairsens© sensor allows specific pollutant measurement comparable to reference methods. The high quality sensors are renowned worldwide by our customers looking for the newest technologies in air quality monitoring. They offer precise and reliable measurement, and are calibrated using a reference-standard value. They come with a unique calibration certificate and don’t need any ...
-
PremiumManufactured by ENVEAbased in FRANCE
The last generation of Cairsens micro-sensors for Particulate Matters (PM) monitoring operates without any influence from moisture in ambient air. They measure PM1 and PM10 concentrations, with increased precision for PM2.5. The Cairsens allows a year of continuous maintenance-free operation, even in highly polluted and humid atmospheres. Thanks to its robust and miniature design, it is fully ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1306 Water Filtration System is an inexpensive, convenient source of deionized, mercury free water for the Series 3300 Mercury CEM. With two stages of pre-filtration eliminating particulate and organic contamination, the final stage R/O membrane and ion-exchange filters have extremely long ...
-
PremiumManufactured by ENVEAbased in FRANCE
The Cairsens sensor allows specific pollutant measurement comparable to reference methods. The high quality sensors are renowned worldwide by our customers looking for the newest technologies in air quality monitoring. They offer precise and reliable measurement, and are calibrated using a reference-standard value. They come with a unique calibration certificate and don’t need any more ...
-
PremiumManufactured by AMS, Inc.based in USA
Soil gas sampling and monitoring with direct push methods are commonly used with soil gas surveys for the investigation of volatile organic compounds. AMS offers soil gas sampling systems with several options to allow sampling for a wide variety of regulatory and standard ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS 6-inches (152mm) Gas Vapor Implant Installation Kit are used for permanent soil gas monitoring, UST monitoring, groundwater sampling, air sparging, vapor extraction monitoring, and as a pressure measurement point in vacuum testing. This kit allows a user to obtain or collect a soil gas sample by positioning or placing a 6” implant in the subsurface, and subsequently withdrawal a sample ...
-
PremiumManufactured by ENVEAbased in FRANCE
The HOFI BOX offers an exclusive sampling system dedicated to heated analyzers. Ideal for corrosive gases. (Plug & play sampling solution for: MIR FT, MIR 9000H, Graphite 52M, Topaze ...
-
PremiumManufactured by ENVEAbased in FRANCE
The Cairsens© sensor allows specific pollutant measurement comparable to reference methods. The high quality sensors are renowned worldwide by our customers looking for the newest technologies in air quality monitoring. They offer precise and reliable measurement, and are calibrated using a reference-standard value. They come with a unique calibration certificate and don’t need any ...
-
PremiumManufactured by ENVEAbased in FRANCE
The Cairsens© sensor allows specific pollutant measurement comparable to reference methods. The high quality sensors are renowned worldwide by our customers looking for the newest technologies in air quality monitoring. They offer precise and reliable measurement, and are calibrated using a reference-standard value. They come with a unique calibration certificate and don’t need any ...
-
Manufactured by Watson-Marlow Fluid Technology Groupbased in UNITED KINGDOM
Flow rates 0.1-1000 ml/min at 7bar (100psi) RMS pressure, ReNu pumphead provides accurate, linear and repeatable low pulse flow under varying process conditions, Process uptime is maximised with no gas-locking, no valve blocking and rapid no-tools pumphead replacement, Flow control 10000:1 with ±1% accuracy, Contained pumphead with integral leak detection, Manual, analog and 110V digital ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you