Gas Sampling Equipment For Air And Climate In Texas
-
ShowcaseManufactured by Cerex Monitoring Solutions, LLC.based in USA
Measurements: The UV Sentry is a parts per billion (ppb) to percent level chemical detection and quantification open-path UV-DOAS analyzer. It offers high-performing, time-resolved monitoring of a variety of regulated ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Specializing in hydrogen and noble gases: For continuous measurement of hydrogen and noble gases, the specific thermal conductivity of the sample gas mixture is measured and used to calculate the concentration. Only binary gas mixtures can be measured directly. If more than two components are present, the concentrations of all other components must be measured separately using other measuring ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The OXYMAT 64 can measure oxygen concentrations in the smallest traces, even down to the minimal measuring range of 0...10 ppm. This is most relevant in air separation plants, in the technical gas production, and welding of high-alloy steels, titanium, and the like under a protective atmosphere. Further applications are realized in hardening shops, in the chemical industry, and in the food ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Chroma S-COS is a fully automatic isothermal gas Chromatograph for the analysis & monitoring of sulphur ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Measures hydrogen and noble gases in corrosive gases. The CALOMAT 62 is a thermal conductivity analytical device specially designed for applications in corrosive gases. Concentration of gas components such as Cl2, HCl, and NH3 can be measured directly, along with H2 and N2 in aggressive environments, for example. This results in a number of possible applications such as in chlor-alkali ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The continuous or discontinuous mode permanent gases monitor for laboratory or online. A highly automated system for routine measurement of permanent gases on the range : ppb or ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
airmo HCHO is designed for the measurement of formaldehyde in air or pure gases. The airmo HCHO is an autoGC using FID detector dedicated to Formaldehyde monitoring at low concentration. This instrument uses a valve with a single sorbent trap, a metallic column and a ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The NOXMAT Model 700 CLD NO/NOx digital analyzer is designed around a state-of-the-art 16-bit microprocessor, with 16 digital inputs, 16 digital outputs, 16 analog inputs and 4 analog outputs. The analyzer can be manually operated from the keypad or remotely via TCP/IP, RS- 232C communications and discrete inputs. The analyzer display includes screen presentation of all analyzer alarms. Four ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
For oxygen standard applications. The OXYMAT 61 is a cost-effective oxygen analyzer for standard applications. The OXYMAT 61 requires ambient air as reference gas. This is supplied by a pump that is integrated into the analyzer housing. Alternatively, pressurized bottle air can be used. The OXYMAT 61 measures oxygen using the paramagnetic alternating pressure method. This guarantees perfect ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC PID for automatic monitoring of compounds, in air, water or soils: This instrument uses a port valve with a loop, and a metallic 0.53 mm ID column. It has a minimum detection level of ppb. Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data storage is integrated in a 19' rack 4U. Isothermal oven in standard (programmed ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Chromatotec® Group distributes Process Quadrupole Mass Spectrometers from InProcess Instruments in France, Italy, Benelux, Saudi Arabia and Taiwan. Learn more about this partnership following this link. With this product line, we can now offer flexible and customer-specific solutions ideal for very fast, precise and continuous multi-component gas analysis. These complete systems include ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Designed for automatic validation of results at different concentration levels ZERO / Sample / Cylinder / CALIB / dilution points by ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet Multipoint Sampling System (MSS) is designed for online monitoring of multiple measuring points. The Gasmet MSS consists of a wall-mounted stainless steel case which includes all valves, flow meters, and pump. Standard setup includes one pump with four (4) sample gas input line, but up to 32 lines can be added according to customer need. Additionally, a second sample gas pump can be added ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet heated Multipoint Sampling System MSSH is designed for online monitoring of multiple measuring points. Gasmet MSSH can be used with Gasmet CEMS ll e system. Gasmet MSSH is an ideal tool for sampling trace concentrations of pollutants in wet, corrosive gas streams, as the sample pump, filter and valves can be heated up to 180°C. The Gasmet MSSH consists of two wall-mounted stainless ...
-
PremiumManufactured by AMS, Inc.based in USA
Install as permanent sample point, or leave in ground as a disposable point. AMS dedicated gas vapor tips are used for detecting hydrocarbon spills, underground storage tank and pipe leaks, landfill contamination and hazardous waste sites. Soil gas monitoring with the AMS dedicated gas vapor tip is easily accomplished using an available AMS gas vapor probe ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The in-situ gas analyzer LDS 6 is characterized by a high availability and unique analytical selectivity and is optimally suitable for numerous applications. One or two signals from up to three measuring points are processed simultaneously by the central analyzer unit. The sensors are designed for operation under harsh environmental conditions and contain a minimum of electrical ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet DX4015 is a portable FTIR gas analyzer for ambient air analysis. The key features of the Gasmet DX4015 include a high sensitivity sample cell for the lowest possible detection limits and a built-in-pump, which means that there is no need to use a separate sampling system. The analyzer can be powered with 12 VDC from for example an external battery, so it can easily be used in field ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS 6-inches (152mm) Gas Vapor Implant Installation Kit are used for permanent soil gas monitoring, UST monitoring, groundwater sampling, air sparging, vapor extraction monitoring, and as a pressure measurement point in vacuum testing. This kit allows a user to obtain or collect a soil gas sample by positioning or placing a 6” implant in the subsurface, and subsequently withdrawal a sample ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Analyzer for Oxygen Measurements: Gasmet oxygen analyzer is designed for continuous oxygen measurement of wet or dry flue gas. This extractive analyzer is suitable for various industrial applications where reliable and accurate oxygen measurement is ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Most portable model: The smallest of Cerex’s Hound Series analyzers. The Cerex Micro Hound offers continuous parts-per-billion (ppb) level monitoring with a standard 2 meter path ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you