Gas Scrubbers Equipment For Air And Climate Available In Virginia
-
PremiumManufactured by ENVEAbased in FRANCE
TDL monitor for in-situ non-invasive measurement of NH3 & H2O, HCl & H2O, HF as well as low or high concentrations of CO and O2 in process or CEMS applications. The Tunable Diode Laser Spectroscopy (TDLS) is the perfect technology to use when you are looking for a selective measurement and a fast response time on some gas components as NH3, HCL, HF or even O2 when conditions are too ...
-
PremiumManufactured by Lutz Pumpen GmbHbased in GERMANY
The B80 HME series is a design with bearingless cantilever construction that is directly coupled to the IEC Motor. Specially designed for plant engineering and confined installation conditions. It can be operated in dry installation next to the tank, thus facilitating access for maintenance and repair work. The pump is suitable for pumping /circulating neutral, corrosive and mechanically ...
-
PremiumManufactured by ENVEAbased in FRANCE
The LabAnalyzer is the perfect solution for quantitative determination of mercury in aqueous samples and sample digests in the laboratory. In contrast to a typical multi-element AAS the LabAnalyzer 254 is specially designed for elemental mercury. This allows top performance in analytical applications. The use of a specially developed highly stable mercury lamp in connection with ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Four steps for occupational safety. With four steps to occupational safety, Scrubber K-415 provides you with maximal protection. The unit neutralizes poisonous fumes and reaction gases and minimizes use of cooling water to safeguard both you and the ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M 3-900 Portable Heated Methane Only and Total Hydrocarbon Analyzer is a heavy duty FID analyzer to continuously measure methane only or the total hydrocarbons to determine the non methane hydrocarbon concentration within a gaseous sample . This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Acid Gas Scrubber neutralizes inorganic acids that often exist in a process exhaust stream or are created during the oxidation of air pollutants. The module can effectively scrub a variety of acids including Hydrogen Chloride (HCl), Hydrogen Bromide (HBr), Hydrogen Fluoride (HF) and Sulfur Dioxide ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M W600 Heated Total Hydrocarbon Analyzer is a very compact wall or panel mount heated FID analyzer to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other emission containing ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M Heated Total Hydrocarbon Analyzer Model 3-500 FID is our lowest cost alternative to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other emission containing hydrocarbons. The ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s thermal and catalytic oxidizer technologies are capable of destroying halogenated organic acids and mixed organic vapor contaminants that are discharged from a variety of industrial process streams. We have also developed several destruction devices specifically for soil and groundwater remediation sites contaminated with chlorinated compounds such as carbon tetrachloride, ...
-
PremiumManufactured by Lutz Pumpen GmbHbased in GERMANY
The B80 HME series is a design with bearingless cantilever construction that is directly coupled to the IEC Motor. Specially designed for plant engineering and confined installation conditions. It can be operated in dry installation next to the tank, thus facilitating access for maintenance and repair work. The pump is suitable for pumping /circulating neutral, corrosive and mechanically ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M 3-800 Portable Heated Total Hydrocarbon Analyzer is a heavy duty FID analyzer to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other emission containing hydrocarbons. The 3-800 ...
-
PremiumManufactured by Jenfitch INC.based in USA
JC 9450 is an excellent additive in helping to control hydrogen sulfide in a gas scrubber system. When using a gas scrubber to remove hydrogen sulfide it is important to understand oxidative energy. Hydrogen sulfide exist in an environment where the oxidative energy will vary between -125 mv to -250 mv. Adding JC 9450 to the liquid phase of the gas scrubber provides a quick reacting oxidant that ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Direct Fired Thermal Oxidizer (DFTO) thermally destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs) and odorous emissions often discharged from industrial exhaust stacks or chemical processes. It is an ideal abatement technology for process streams heavily laden with pollutants or intermittent batch processes where the oxidizer can come on-line relatively ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M 109L is a heated FID analyzer to continuously and simultaneously measure the Methane concentration, the Total Hydrocarbon concentration and the Non Methane concentration within a gaseous sample. The 109L is a table top or 19 inch rack mount Heated FID analyzer for the NMHC measurement in ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 approved ProScatterTM particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams. Continuous Particulate Monitoring for saturated wet stack applications typically found after wet scrubbers, wet electrostatic precipitators and wet flue gas desulphurisation ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M Heated Total Hydrocarbon Analyzer Model 3-600 FID is another low cost alternative to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other emission containing hydrocarbons. The ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
For a less demanding, lower throughput gas cleaning system, the venturi scrubber is a well tested and respected design used by many industrial processes. It uses a combination of vortex technology and high pressure water misting to remove harmful elements from the exhaust ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Thermal Recuperative Oxidizer destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs), and odorous emissions discharged from various industrial processes using thermal oxidation and heat recovery. Anguil’s thermal recuperative oxidizers incorporate flexible heat exchanger arrangements, from cleanable tubes ideal for applications with particulates, to shell ...
-
PremiumManufactured by Lutz Pumpen GmbHbased in GERMANY
The B80 KME series was developed as a wet-installed centrifugal immersion pump for stationary use in tanks and basins. The direct-coupled pump with plain bearings is suitable for pumping and circulating neutral and chemically aggressive liquids in the chemical industry and process engineering, in electroplating and surface technology, in washing systems and water treatment plants, for sump ...
-
Manufactured by China Xicheng EP Ltdbased in CHINA
A furniture factory waste gas scrubber, also known as an air pollution control device or an air scrubber, is a system used to remove or neutralize pollutants and contaminants from the exhaust gases generated during furniture manufacturing processes. These pollutants can include volatile organic compounds (VOCs), particulate matter, and other harmful chemicals that are released into the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you