Only show results available in Virginia? Ok

Gas Storage Applications

  • Geosynthetic Lining for Secondary Containment

    GCLs can be used around and underneath secondary containment above ground petroleum storage tanks. of above ground storage tanks and are easy to install. Installation details and penetrations are easily handled using simple installation techniques and can be quite cost effective.

    By CETCO based in Hoffman Estates, ILLINOIS (USA).

  • Premium

    Applications and Air Pollutants Removed in the Chemical, Pharmaceutical and Plastics Industries

    Supplying for over 35 years reliable air pollution control equipment and systems for removal of all gaseous compounds, particulate and odors from chemical process operations, reactors, dryers, calciners, membrane cells, pharmaceutical reactors and tablet dryers, crystallizers, vessel filling and storage vent emissions, emergency scrubbing of high concentration gas releases from cylinders, vacuum pump emissions, Quench /scrubber systems for acid gases and particulate from high temperature thermal oxidizers.  Gaseous emissions from piloting operations and research lab hoods. Specialty NOx abatement for explosives manufacturing and other process operations. Recovery and re-concentration of acids and other gaseous contaminants including by-product production.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • FoamFatale Storage Tank Fire Suppression System

    Welcome to the new era of tank fire protection! Discover FoamFatale's breakthrough automatic, AFFF Self-Expanding Foam System (SEFS) for cone roof, internal floating roof and open-top floating roof tanks. No need for proportioner, aspirating device, foam chamber, pourer, just pure fire suppression even for the full surface of a large scale open-top floating roof tank.

    By FoamFatale Greece Ltd. based in Thessaloniki, GREECE.

  • Premium

    Agitation and mixing solutions for chemical

    Applications within the Chemical Processing Industry (CPI) are extensive.  Thousands of products are produced, synthesized, reacted, and treated to help produce a variety of products.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Premium

    Agitation and mixing solutions for oil & gas

    The two main areas in the oil and gas market are upstream operations such as exploration, recovery, storage, and transfer and downstream refining operations.  Exploration for oil and gas includes offshore drilling rigs and land rigs.  Downstream production includes the cracking of oil into transportation and fuel products and a variety of petrochemicals.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Moisture Monitoring for Natural Gas & LNG

    The presence of moisture in high-pressure natural gas from production wells causes pipelines and associated valves to freeze. High moisture content also leads to the formation of hydrates of the liquid hydrocarbons present, thus causing further difficulties. The moisture content of the gas also adversely affects the calorific value of the gas, thus lowering the quality and value of the product. Moisture is therefore measured at the point of extraction, at export stations, at gas storage locations and in the transmission grid. As natural gas often contains high levels of contaminants, more complex systems are required to maintain instrument performance over prolonged periods and to verify data collected in spot-check moisture analysis.

    By Moisture Control & Measurement Ltd based in Wetherby, UNITED KINGDOM.

  • Premium

    Water Storage for the Crude Oil Industry

    Superior Tank Co., Inc. manufactures Bolted Steel Tanks and Welded Steel Tanks specifically designed for the oil industry. Bolted steel tanks are tailored to the strict requirements of oil storage and API 12B Standard with capacities from 100 to 10,000 BBL. Coatings and accessories are specifically designed for the oil and petrochemical industry. Flat panel Bolted Steel Tanks are also available for oil storage.

    By Superior Tank Co., Inc. based in Rancho Cucamonga, CALIFORNIA (USA).

  • Continuous emissions monitoring for carbon capture and storage

    The process control of a CO2 capture plant needs good and reliable detection of gas phase NH3. Measuring NH3 is a challenge due to the corrosive environment and high concentrations of NH3. Several places in the process needs to be monitored and to transport the sample is difficult. A large dynamic range is needed as the NH3 concentration can vary between 15% volume and a few mg/m3. 

    By Enviro Technology Services plc based in Stroud, UNITED KINGDOM.

  • Premium

    Underground storage leak monitor for refineries

    By Arjay Engineering Ltd. based in Oakville, ONTARIO (CANADA).

  • Aluminium coverage for petroleum

    CST Covers domes help operators achieve regulatory compliance and bring new levels of cost efficiency to storage facility operations. By helping control hazardous vapor emissions and preventing water intrusion, our domes provide environmental and stored product protection and reduce lifetime maintenance and operating costs. The unique CST Covers dome can also be designed to withstand pressure required in certain difficult applications.

    By CST Industries Inc based in Gardena, CALIFORNIA (USA).

  • Pulsair`s industrial mixers for oil & lubiricants industry

    Pulsair Systems can custom design a system that mixes and blends tanks of virtually any tank size or configuration. No application is too large or too small. Our fast, efficient and economical Pulsair mixers can give you substantial savings on both electricity and compressed air. Our control systems can operate either single or multiple tanks. Whether it`s blending lubricants, mixing base stock and additives, thinning heavy emulsions or keeping storage tanks at a constant temperature, Pulsair Systems` technology has proven to be dramatically better. Our systems blends lubricants to specification usually within 30 minutes of adding all the ingredients used in your recipe. The result is a greater profit margin for you, the operator.

    By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you