Only show results available in Virginia? Ok

Gas Treatment Applications

  • Premium

    Drill Cuttings Plants For Oil and Gas Industry

    Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal of the drill cuttings. Our VacuDry technology is designed to safely separate oil, water and mercury from the solids (including NORM), allowing reuse of the oil and safe disposal of the water, mercury, solids and NORM.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Petrochemical

    Durable regenerative thermal oxidizer (RTO) technology is at the core of our systems. MEGTEC designs and engineers system solutions to meet your special requirements, ranging from energy-efficient treatment of dilute volatile organic compound (VOC) flows, such as tank ventilation, to demanding applications utilizing VOC energy for secondary heat recovery; for example, in the form of process streams. This can include pre- and tail gas treatment systems, and could handle hazardous components such as sulphurous or chlorinated hydrocarbons. For special requirements, we can offer FTO (flameless thermal oxidation) and we can design systems operating safely on oxygen contents below 5%.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Water disinfection for the oil and gas industry

    Oil and gas companies, whether in coastal or offshore settings, use water in various stages of production and for drinking and sanitary purposes. Process water, feed water and wastewater requires disinfection and filtration treatment prior to use, reclamination or discharge. De Nora Water Technologies has been providing water and wastewater treatment solutions to the oil and gas markets for more than 25 years.

  • Premium

    Chemical water treatment for refinery

    Deposits and corrosion as well as undesired emulsion, foam and toxic gases impact the operation and the occupational safety in refineries. Kurita provides tailored treatment concepts to increase the operational and the occupational safety. Our product lines and technologies are based on decades of experience in process treatment and they contribute to reduce your total operating costs.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Water treatment solutions for beverage industry

    Metering and disinfection for the beverage industry. Disinfection processes are essential for smooth, hygienic operations. ProMinent offers solutions suitable for the entire production and bottling section. And the good news is that this investment pays off in no time.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Advanced water treatment equipments for off-shore industry

    We offer a complete line of solutions as follow: Desalination by reverse osmosis, brackish water reverse osmosis, multimedia filters, feed pump & feed pump skids, EDI, pre & post treatment options, membranes, softners, services & maintenance.

    By ADVANCED Equipment and Services based in Hollywood, FLORIDA (USA).

  • Premium

    Aeration and mixing technologies for oil and gas wastewater treatment

    As more hydraulic fracturing wells come into operation, the stress on surface water and groundwater supply increases. The expanding volume of wastewater created needs to be captured, disposed of, or recycled in an environmentally sustainable manner so the EPA continues to increase regulations.  We will work with you to create a comprehensive solution to treat your wastewater, meet increasingly strict governmental regulations, and support long term water life cycle management.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Air pollution control for the gas industry

    Treatment from amine or teg de-watering processes for gas utilities and distributers – commonly use thermal oxidizers for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Premium

    Air pollution control for the landfill methane remediation industry

    Methane gases used for electric generation or pipeline gas synthesis via membrane or pressure swing adsorption (PSA) processes – commonly use incinerators for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Premium

    Process Control for the Petrochemical Chemical Industry

    Most chemical products as we know today are composed of a few hundreds of basic chemicals, extracted mostly from crude oil and natural gas. Instrumentation, analyzer systems and process optimization are not new to the operation of all chemical and petrochemical processes.

    However, tightening regulations, competition pressure and increasing raw materials cost urges the industry to go deeper into process control technology. As a single-source supplier of the (petro)chemical industry since many years, AppliTek has supplied them many analyzer systems for monitoring chemical parameters in all sorts of applications, from the actual production step to peripheral treatment processes. Our application people and engineering department understand your needs and translate them into real solutions.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    High quality gas sensor solutions for process control

    Gas monitors controlling heat treatment of metals. Endothermic gas is a mixture of carbon monoxide, carbon dioxide, methane and other gases that is required for hardening or carburising of steel. By carefully controlling the amounts of each gas and the temperature in the treatment furnace, the steel surface can be hardened to provide long lasting components such as gears and tools.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Solutions for the oil & gas industry

    The Oil and Gas industry represents an important market segment where DMT enhances value. Especially the use of Flash gas is increasing. These type of gases needs to be cleaned in order to protect the environment as well as the utilities where it is used. Easy to use desulphurisation techniques are more and more demanded, next to re-use of water and water treatment techniques. DMT designed a range of desulphurisation techniques especially for these purposes and has dedicated water treatment solutions. The variety of problems ask for specialists to implement these efficiently. Our extensive expertise can help you with your challenge to find an environmentally friendly and profitable solution.

    By DMT Environmental Technology BV based in Joure (NL), NETHERLANDS.

  • Premium

    Wastewater treatment solutions for oil and gas industry

    The oil and gas industry faces water and wastewater treatment specific challenges. IDRAFLOT flotation units represent an effective solution for oil and grease separation. Explosion proof versions to be evaluated.

    By IDRAFLOT based in Zoppola, ITALY.

  • Premium

    Evaporation technology for oil & gas industry

    The oil & gas industry faces water and wastewater treatment specific challenges. EVALED evaporators represent an effective solution for both downstream (onshore and offshore) and upstream plants, allowing ZLD (Zero Liquid Discharge).

    By EVALED-Evaporator based in Zoppola (PN), ITALY.

  • Premium

    Air pollution control for the natural gas industry

    Treatment de-watering processes for gas utilities and distributers – commonly use thermal oxidizers for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Premium

    Water treatment solutions for the oil & gas industry

    Production of oil and gas is usually accompanied by the usage and production of large volumes of water in several applications. The industry recognizes its dependency on water and is focused on minimizing its use, enhancing reuse and recycling opportunities, and improving treatment technologies and disposal options. Lenntech provides sustainable complete solutions for water and waste water treatment in oil and gas industry considering a wide range of technologies and strategies.

    By Lenntech Water Treatment based in Delft, NETHERLANDS.

  • Reduced Sulfur Compound Treatment for Refinery Wastewater

    Sulfur compounds, such as hydrogen sulfide, thiosulfates and mercaptans, can present serious refinery wastewater problems. Hydrogen peroxide treatment is a cost effective way to treat these reduced sulfur species. http://www.h2o2.com/industrial/refinery-petrochemical-applications.aspx?pid=98&name=Reduced-Sulfur-Compound-Treatment

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Oil Water Separation / Water Treatment - Chemical Reduction

    Adding Wilsa ElectroWaveTM technology to existing separation or water treatment can help reduce or eliminate chemical use. The Wilsa Effect can often take the place of surfactants, demulsifiers, sacle inhibitors and biocides to enhance separation and clarification.

    By Hudson Industries based in Warren, OHIO (USA).

  • Mobile Sewage Treatment for Remote Locations

    NOMADIC™ mobile sewage treatment systems are fully customizable, pre-plumbed, pre-wired and ready to be deployed in any off-the-grid location. The versatility of our systems allows them to be shipped using any method necessary to access your remote location.

    We do not limit ourselves by focusing on one specific application, we believe our technology can be used anywhere in the world where people require environmentally friendly sewage treatment.

    By Nomadic Systems based in Langley, BRITISH COLUMBIA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you