Gas Treatment Equipment For Air And Climate
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
The use of lime for treating flue gases is a proven technology. Flue gas is generated from the thermal treatment process in Energy from Waste plants (EfW) and contains acidic gases such as hydrogen chloride, sulphur dioxide and hydrogen fluoride. The use of lime in the three main flue gas treatment processes of; dry, semi-dry and wet processes shows its flexibility and adaptability in its ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Certain chlorinated solvents are considered incompatible with standard polyethylene. However, a gas treatment process known as fluorination alters the surface of molded polyethylene products, making them compatible with these and many other aggressive chemicals. The light blue color indicates that the Spill Pallets and grates have been ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Certain chlorinated solvents are considered incompatible with standard polyethylene. However, a gas treatment process known as fluorination alters the surface of molded polyethylene products, making them compatible with these and many other aggressive chemicals. The light blue color indicates that the Spill Pallets and grates have been ...
-
PremiumManufactured by Ecological Laboratories, Inc.based in USA
The use of MICROBE-LIFT /IND treatment technology mitigates the control of hydrogen sulfide and its generation, while improving waste oxidation processes. The continued use of MICROBE-LIFT/IND biological treatment assures improved oxidation reduction and odor abatement of the decomposing waste matter. Improved biodiversity created as a result of augmentation, along with the control and reduction ...
-
PremiumManufactured by ENVEAbased in FRANCE
The only system allowing the measurement of 1 or 2 independent streams in a single analysis ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
This product is a gas analyzer that can continuously measure the concentration of ambient gas in a heat treatment furnace. Can accurately measure CO, CO2, CH4 gas concentration. One unit can continuously measure the gas concentration of two components at the same ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
SgPur™ is Eco-Tec’s proven H2S removal system for treatment of associated sour gas from oil and gas operations. The system is capable of treating sour gas with H2S concentrations of a few hundred ppmv to over 30,000 ppmv (3%) while reducing the H2S to just a few ppm to meet downstream requirements for power generation fuel, or to be sold for pipeline or transportation fuel. The H2S is ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil provides a broad line of technologically advanced, yet user-friendly air pollution control products for the abatement of industrial emissions like Volatile Organic Compounds (VOCs), Hazardous Air Pollutants (HAPs), Nitrogen Oxides (NOX) and process odors. Each thermal and catalytic oxidizer product represents a value-engineered system with emphasis on cost minimization for vapor combustion ...
-
PremiumManufactured by Ecological Laboratories, Inc.based in USA
Enhances biological performance and promotes bio-solids reduction. MICROBE-LIFT/Sludge-Away is formulated specifically for the removal of organic bottom or surface solids that are slow to degrade. Provides rapid, natural sludge and muck removal and works 80% faster than competitive products. Binds phosphate and helps with the liquification and nutrient enhancement of manure. ...
-
PremiumManufactured by ENVEAbased in FRANCE
Perfectly adapted for control and regulation of reagent in flue gas treatment and transport lines with very low material ...
-
PremiumManufactured by ESCO International (EI)based in UNITED KINGDOM
Advanced oxidation processes (AOPs), uniting ozone and properly designed ultraviolet systems, in conjunction with hydrogen peroxide , may offer a powerful water treatment solutions for the reduction of undesirable organic compounds, COD and TOC. AOP processes are successfully used to decompose many hazardous chemical compounds to acceptable levels, without producing additional hazardous ...
-
PremiumManufactured by ENVEAbased in FRANCE
The SM-3 mercury analyzer measures continuously the elemental, bound and ionic mercury in stack fluegas. The operating principle of the SM-3 is based on a completely new technique: mercury compounds cracking and the reduction of ionic mercury contained in stack gas is performed applying the thermocatalytic method. Wet chemical sample gas treatment using reagents and bubblers is avoided. ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The SmartWireless Site Sentinel CX sensor station is an accessory to any Detcon wireless RXT transceiver or wireless controller and is easily and economically deployable in both permanent and temporary installations. The CX wirelessly transmits the data from up to 4 wired gas detectors back to wireless controller and includes a battery that powers the radio, alarm devices, and the attached ...
-
PremiumManufactured by Jacobi Groupbased in SWEDEN
Activated carbon products designed for the oil and gas industry, covering water treatment, vapour treatment, and process applications in petrochemical ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Tekran and VE Technology have partnered together to improve the quality of Natural Gas sampling and analysis. Proper sample collection requires precision equipment to assure mercury is quantitatively transported between the source pipeline and the sample collection device. The Tekran 2642 Natural Gas Sampler paired with a Tekran 2600-NG provides a complete sampling and analysis ...
-
PremiumManufactured by ENVEAbased in FRANCE
The MIR 9000H is a multi-gas analyzer using the Gas Filters Correlation technology (GFC). With its hot measurement principle (180 °C on a hot and humid sample), the MIR 9000H is the perfect tool for the analysis of the main gas parameters in many applications, including DeNOx (SCR / SNCR) and the optimization of flue gas treatment ...
-
PremiumManufactured by Randolph Austin Companybased in USA
Di-Sol is a blended water soluble material that is formulated for specific applications and manufacturing processes. The polymer is then either molded or extruded to give the customer a product for the required application. Most of these products have been specifically manufactured to serve as an enclosure for carrying chemical substrates in the form of powders, paste and some fluids. Areas of ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DPF/SCR &ASC/DOC System Stationary Source ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Certain chlorinated solvents are considered incompatible with standard polyethylene. However, a gas treatment process known as fluorination alters the surface of molded polyethylene products, making them compatible with these and many other aggressive chemicals. The light blue color indicates that the Spill Pallets and grates have been ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Certain chlorinated solvents are considered incompatible with standard polyethylene. However, a gas treatment process known as fluorination alters the surface of molded polyethylene products, making them compatible with these and many other aggressive chemicals. The light blue color indicates that the Spill Pallets and grates have been ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you