Gaseous Emissions Equipment For Air And Climate In Europe
-
Manufactured by Ventilazione Industriale Srlbased in ITALY
I.T.R. is the name chosen by Amboso for its new regenerative type of incinerator plant with intrinsic heat recovery, i.e. a combustion system in which the heat energy is recovered inside the plant with the maximum possible efficiency. Compared with other abatement systems, the regenerative combustion unit (incinerator) is ideal for the incineration of any type of volatile organic compound in ...
-
Manufactured by EnviroExperts Italia Srlbased in ITALY
The SCR DeNOx reactors Deparia are particularly suited to the removal of NOx contained in the emissions from internal combustion engines Diesel cycle or the Otto cycle, or from boilers or ...
-
Manufactured by Ecowairbased in ITALY
Eco Desulphurization Plant: The content of Sulphuric acid in the paste is considered a matter of pollution in itself and become more dangerous while the paste is put in the furnace to produce pure lead. During this phase the furnace release gases that are mainly constituted by SOx. Some countries rules require that the peak point never exceed the 200 mg/Nm3. Some others out of Europe, require ...
-
Manufactured by Kappa Filter Systems GmbHbased in AUSTRIA
The Kappa Sorbdry™ is a high-performance filter for the filtration of combinations of aerosols, gaseous emissions and odours. It can be perfectly adapted to the task at hand – regardless of the composition and intensity of the raw gas load. The adsorbent filter elements enable targeted filtration of gaseous emissions and ...
-
Manufactured by Johnson Mattheybased in UNITED KINGDOM
Particulate number legislation for gasoline direction injection vehicles tightens with Euro 6c in 2017/18. Durability, soot regeneration, backpressure and catalyst activity are key issues, as they are for diesel particulate filters (DPF), although the challenges are very different for the different fuels, and the technologies cannot simply be transferred from one to the other. ...
-
Manufactured by Brofind Spabased in ITALY
High-tech plants designed to abate and then to recover the solvent content present in a stream, by means of activated carbon adsorption and regeneration ...
-
Manufactured by Purenviro ASbased in NORWAY
A venturi is one of the most efficient ways of removing dust and particulate matter from air and gas flows. A venturi from Purenviro will reduce the emissions of particulate matter like PM2.5 and PM10. There are no filter bags that could plug. The product works perfectly even in the most challenging ...
-
Manufactured by Centrotherm Clean Solutions GmbH & Co. KGbased in GERMANY
The CT-W wet scrubber is our proven solution for the treatment of waste gases emitted in different CVD and etching and EPI applications. One advantage over common wet scrubbers is a special CT-W feature that reduces up to 99% of the dust particles in the waste gas flow. The absorbed dust particles are automatically discharged with the waste ...
-
Manufactured by Brofind Spabased in ITALY
High-tech plants designed to abate and then to recover the solvent content present in a gaseous stream. They are applied specifically to water-soluble ...
-
Manufactured by Terragon Environmental Technologies Inc.based in CANADA
Maximal recovery of resources for habitats: In many communities, the cost of water and electricity is high, and the uncontrolled discharge and disposal of waste has the potential of endangering the surrounding environment. This situation can exist in marine platforms, northern communities, hotels, mining camps, arctic stations, island communities, research stations, and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you