Greenhouse Gas Equipment For Air And Climate Available In Ohio
-
ShowcaseManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet DX4015 is a portable FTIR gas analyzer for ambient air analysis. The key features of the Gasmet DX4015 include a high sensitivity sample cell for the lowest possible detection limits and a built-in-pump, which means that there is no need to use a separate sampling system. The analyzer can be powered with 12 VDC from for example an external battery, so it can easily be used in field ...
-
ShowcaseManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Easy handling and individual customizations. With the analyser EasyCEM gases can be measured such as CO, CO2, NO, SO2, SF6, THC with the NDIR method or with PID , as welll as gases like NH3, HCl and CH4 with a TDLS (tunabel diode laser). By extending further modules with NDUV or electrochemical measuring principles, it is possible to measure gases like O2, O3 or NO2. The analyser is particularly ...
-
ShowcaseManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The handy Mini Series consists of the following individual components which can be assembled as complete ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 3750-2 basic ventilation system (dual gas) and Innova 3750-5 basic ventilation system (multi-gas) offer fully integrated gas monitoring solutions. They enable accurate tracer gas methods and are ideal for ventilation performance studies or ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Fast mid-range measurements in cities or near industrial areas. The GC955 118 Methane model from Synspec is specifically designed to provide fast mid-range measurements in cities and near industries. It is equipped with a compact oven with a column that separates methane from other hydrocarbons, and features an FID detector resulting in two distinct peaks: one for methane and one for total ...
-
PremiumManufactured by Silcarbon Aktivkohle GmbHbased in GERMANY
Air cleaning: In many industrial processes, toxic gaseous pollutants are emitted. Generally, these substances should not be released. Most of the toxic pollutants in the exhaust air are solvents, which are required for the production of consumer goods. For the removal and separation of these solvents (mostly hydrocarbons, and chlorinated hydrocarbons), the use of activated charcoal has been ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The mobile suction pump allows upgrading old SF6 maintenance devices. Thus it is possible to recover the SF6 gas from the gas compartment to a final vacuum of 1 mbar by connecting in series the mobile suction ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
For adsorption of gaseous and dusty decomposition products in large gas compartments. B148R03: Mobile pre-filter unit DN20 (pe 16 bar). B148R04: Mobile pre-filter unit DN40 (pe 16 ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
We also deliver custom-tailored solutions for the SF6 gas handling of electron accelerators. Compared to the "normal" gas handling in the energy sector, larger SF6 gas volumes – usually several tons – have to be handled in the field of electron accelerators. Therefore, high-performance system components as well as large supply lines (up to DN 100) are needed, so that the gas volume ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
DILO couplings allow a connection to be made by simply screwing the two coupling parts together. Before the metal to metal seal closes the pressure and vacuum tight coupling is sealed inside by means of an O-ring. When loosening the coupling parts again, the same O-ring prevents gas loss whilst the self seal valves ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Mid-range air measurements in cities or near industrial areas. The Alpha 115 Methane/TNMHC Analyser is a gas chromatograph (GC) specifically designed to measure concentrations of greenhouse gas methane in the ambient air. Simultaneously, the analyser provides the sum of all other hydrocarbons in the same measurement cycle for better determination of the total air pollution. The method utilised ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Starter series for medium-sized gas compartments The service carts of the Compact series for gaseous or liquid storage offer the best entry into professional gas handling. Equipped with the well-proven DILO components these service carts allow the recovery, filling and purification of SF6 gas as well as the evacuation of air and venting of medium-sized gas compartments. Depending on the device ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The H25-IR PRO is a next generation industrial-grade refrigerant leak detector and gas analyzer capable of detecting over 40 of the most commonly used refrigerants and halogen gas compounds. Special models measure and detect R600a, R290, R744 (CO2) or SF6. It can be used to locate and then quantify gas leaks, as well as log and totalize a group of leaks in a system. The H25-IR PRO adds new ground ...
-
PremiumManufactured by Zetaş Kimyabased in TURKEY
The location of the water tank is extremely important at the point of increasing the efficiency of use and creating a more spacious environment. The techniques and evaluations used in this regard are in accordance with the application principle and should overlap with the project. The underground water tank, which provides durable and trouble-free storage for many years, is one of the best ...
-
PremiumManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
Monitoring Wind Turbine Efficiency: Datum’s Wind Turbine Condition Monitoring System is suitable for both offshore and onshire wind turbines. It is designed monitor turbine efficiency, detect and prevent failures of generators, gearboxes and rotor bearings through highly accurate real-time condition and vibration monitoring. Attached to the driveline of a wind turbine, e.g. between gearbox ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
This compact service unit has been specially designed for very small gas quantities and is perfectly suited for applications such as SF6 gas handling on medical devices, electron microscopes or medium voltage components. The device includes all functions required for professional and emission-free SF6 gas handling such as: gas recovery down to < 10 mbar, purification during the recovery and ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
CEMS has four basic parts: the dust monitoring subsystem, gaseous pollutants monitoring subsystem, flue gas parameter monitoring subsystem, system control and data acquisition and a processing subsystem. It can monitor SO2, NOx, O2, dust, temperature, pressure, flow rate and other parameters such as HCl, HF, CO, CO2 for specific occasions. After dedusting by sampling probe, tracing by heating ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
High-range stack measurements up to 1000 ppm. Synspec Alpha 116 gas chromatograph (GC) is built for continuous stack monitoring with high-range detection limits, up to 1000 ppm. Alongside the measurement of greenhouse gas methane, the analyser detects and presents the sum of all other hydrocarbons, ensuring precise measurement of the total air pollution. The method utilised ensures that the ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The Mirror-Analyser SF6 uses the physical dew point mirror measuring principle which is characterised by its high precision and utmost reliability in order to measure the moisture content. By cooling the integrated mirror the moisture content of the gas is determined by measuring the temperature depending on the condensation or icing of the mirror. The other parameters of SF6 quality are ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
Used SF6 with a SO2 content of ≥ 250 ppmv. Manufactured according to technical regulations for compressed gases with TÜV certificate. Gas cylinder labelling in accordance with DIN EN 1089. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you