Only show results in Texas? Ok

Hazardous Air Pollutants (HAPs) Applications

  • Premium

    Air pollution control for the ethanol/biodesel industry

    Renewable energy plants are expanding and being developed at a significant rate in North America and throughout the world. In the United States, the Clean Air Act for reformulated gasoline (RFG) mandates a 2wt.% oxygen requirement, driving the demand for more production. Ethanol is the most viable additive because it is a clean-burning fuel produced from renewable, domestic biomass sources. However, the production of these fuels can result in unacceptable levels of volatile organic compounds (VOCs), carbon...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the metal decorating industry

    Environmental regulations for air pollution cotrol at metal decorating and packaging facilities usually address can makers, base coil coaters, or metal parts and packaging manufacturers. Metal Decorating can be classified as any process where metal is formed painted, or coated. Metal Packaging is generally considered processes involved in the production of aluminum cans, light metal containers, closures and components.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    VOC and HAP Abatement

    As is the case for many industrial manufacturing processes, emissions are best destroyed through the use of thermal and catalytic oxidation technologies. Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs) are destroyed through the use of high temperature combustion with direct heat recovery. The harmful air pollutants are converted to heat, water vapor and carbon dioxide, creating a destruction efficiency greater than 99%.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Industrial chemical solutions for the chemical product manufacturing sector

    Chemical product manufacturing involves the handling of acids, carcinogenic and toxic chemicals, along with the emission of fumes that contain volatile organic compounds (VOCs), hazardous air pollutants (HAPs), and particulates.

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Vacuum technology solutions for municipality industry

    More and more cities see an increase of air pollution caused by fine dust and hazardous PM10 and PM2.5 particulates. Our DISA-CLEAN is a street & area sweeper that efficiently uses high-powered vacuum technology to permanently remove dirt, dust, and PM10 and PM2.5 particulates. DISA-CLEAN is a dust-free alternative to conventional street sweepers but with no water needed to suppress dust.

    By Disab Vacuum Technology based in ESLÖV, SWEDEN.

  • Premium

    Environmental solutions for the engineered wood products

    The engineered wood products industry relies on Dürr Megtec for regenerative thermal oxidizer (RTO), regenerative catalytic oxidizer (RCO), wet electrostatic precipitator (WESP), dry electrostatic precipitator (DESP), and wet scrubber technologies for effective emissions control of volatile organic compounds (VOCs), hazardous air pollutants (HAPs), particulate matter (PM), and blue haze from wood dryers and press vents. As an industry leader, we offer a comprehensive suite of advanced air pollution control...

    By Dürr Systems, Inc. based in De Pere, WISCONSIN (USA).

  • Air permit compliance

    A centralized solution for permit regulatory tracking against limits and obligations.

    By Perillon Software Inc. based in Acton, MASSACHUSETTS (USA).

  • Air monitoring equipments for outdoor & indoor air quality

    Gradko’s ambient air monitoring equipment is widely used to monitor both indoor and outdoor air quality. Continuous development allows us to provide equipment for a broad range of applications, covering short-term and long-term monitoring. Pollutants can be detected even at very low levels – limits of detection are typically in the low parts per billion (ppb) range.

    By Gradko International Ltd based in Winchester, UNITED KINGDOM.

  • Plastic Random Packing for Air Stripping

    Air Stripping is the transferring of volatile components of a liquid into an air stream. This process is used for the purification of groundwater and wastewater containing volatile compounds. Air Strippers are usually packed towers operated with a countercurrent flow of water and air. The design for Air Strippers involves a packed tower which includes plastic random packing it its design. The size of the packed tower and plastic random packing is determined by the air to water flow rates. Since many of the...

    By KemFlo Canada Inc based in Ontario, ONTARIO (CANADA).

  • Odor control for composite

    A Single Solution To Manage Composite Odors: Many resins used in the composite industry emit styrene vapors which are considered hazardous in high concentrations and whose odor is an unpleasant nuisance. This gas is categorized as a volatile organic compound (VOC) and listed by the United States Environmental Protection Agency (US EPA) as a Hazardous Air Pollutant (HAP). Styrene is considered highly reactive in the atmosphere and may contribute to smog formation and the production of secondary air pollutants.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Stack Testing for the Aluminum Industry

    ALUMINUM INDUSTRY: Performed a range of test measurements required by the promulgation of the Secondary Aluminum MACT standards. Testing included measurements of Hazardous Air Pollutants for establishing Area vs. Major Source Determinations, as well as dioxin/furan compounds associated with chlorine emissions from fluxing operations.

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Data Acquisition and Compliance Software Solutions for Petrochemical and Refining

    VIM Technologies, Inc. has been working with petrochemical and refining customers since 1995. We have continued to experience market share in this industry over the years and are working together with key industry leaders.

    By VIM Technologies based in Glen Burnie, MARYLAND (USA).

  • VOC / HAPs reporting

    The Wercs has developed an online reporting module which enables manufacturers to completely eliminate the manual system that is in place for VOC/HAPs reporting. This new module automatically gathers VOC/HAPs data from SDSs and cross-references it with the order history. Your customers can now go to a secured website, enter the name of the product and get a complete VOC/HAPs emission analysis for annual reporting requirements.

    By UL - The WERCS based in Latham, NEW YORK (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you