HEPA Air Filtration Equipment For Air And Climate Near Tuvalu
-
Manufactured by TSI Incorporatedbased in USA
Automated Filter Tester Model 3160 determines the pressure drop and fractional efficiency at different particle sizes (15 to 800 nm) in order to obtain the most penetrating particle size (MPPS) of HEPA and ULPA filters and filter media. It is designed to comply with the test requirements of EN 1822 parts 3 and 5. Filter tests are performed automatically following user-specific test parameters ...
-
Manufactured by TSI Incorporatedbased in USA
The DRX Aerosol Monitor can measure both mass and size fraction at the same time and provides a gravimetric sample. It is suitable for indoor and outdoor applications, industrial and occupational hygiene, baseline screening, remote monitoring and research ...
-
Manufactured by TSI Incorporatedbased in USA
The DustTrak II Aerosol Monitor 8530 is a desktop battery-operated, data-logging, single-channel, light-scattering laser photometer that gives you real-time aerosol mass readings and collects a gravimetric sample. It uses a sheath air system that isolates the aerosol in the optics chamber to keep the optics clean for improved reliability and low maintenance. It is suitable for clean office ...
-
Manufactured by TSI Incorporatedbased in USA
The DustTrak DRX Aerosol Monitor measures aerosol contaminants such as dust, smoke, fumes and mists. Leading the industry in real-time dust monitoring, DustTrak™ DRX Aerosol Monitors can simultaneously measure both mass and size fraction. DustTrak DRX monitors are multi-channel, battery-operated, data-logging, light-scattering laser photometers that give you real-time aerosol mass readings ...
-
Manufactured by TSI Incorporatedbased in USA
In 1990, the U.S. Army asked TSI to develop an advanced-technology light scattering photometer to replace aging instruments incapable of measuring the high protection factors provided by newer gas mask designs. The result was the Model 8587 Laser Photometer, which is still in service. The U.S. Army and other photometer owners asked TSI to develop a modern version of the 8587 Laser Photometer that ...
-
Manufactured by TSI Incorporatedbased in USA
The model 8177 photometer is a retrofit option for any 8130 filter tester. Light scatter photometers are the preferred choice for detectors in respiratory filter and filter media testing. Photometers have a very high dynamic range and sensitivity and thus can be used to measure filter efficiencies up to 99.999% without dilution. The model 8177 photometers are now user- and field-serviceable, ...
-
Manufactured by TSI Incorporatedbased in USA
The model 3140 filter tester uses the same aerosol generation technology as the model 8130A respiratory filter tester. It works with Emery oil, DOP, DEHS, paraffin and other oils. Two new generation CPCs simultaneously count upstream and downstream particles. This enables accurate, repeatable and fast measurements, for example a HEPA filter can be tested in less than 15 seconds. Data can be ...
-
Manufactured by TSI Incorporatedbased in USA
The model 8587A laser photometer uses the same photometer engine that is used in the Automated Filter Tester model 8130A. It uses a 30 mW laser to illuminate and collect the scattered light from airborne particles. An internal valve allows switching between upstream and downstream sampling. Due to its portability and wide dynamic range, it also is used in HEPA filter scanning systems measuring ...
-
Manufactured by TSI Incorporatedbased in USA
The DustTrak II Aerosol Monitor 8532 is a handheld battery-operated, data-logging, light-scattering laser photometer that gives you real-time aerosol mass readings. It uses a sheath air system that isolates the aerosol in the optics chamber to keep the optics clean for improved reliability and low maintenance. It is suitable for clean office settings as well as harsh industrial workplaces, ...
-
Manufactured by TSI Incorporatedbased in USA
Our handheld DRX Aerosol Monitor is a multi-channel, data-logging, laser photometer for real-time aerosol readings. Portable design allows you to measure dust, fumes, mists and smoke and is suitable for engineering control ...
-
Manufactured by TSI Incorporatedbased in USA
The DustTrak II Aerosol Monitor 8530EP is a desktop battery-operated, data-logging, single-channel, light-scattering laser photometer with external pump that gives you real-time aerosol mass readings and collects a gravimetric sample. It uses a sheath air system that isolates the aerosol in the optics chamber to keep the optics clean for improved reliability and low maintenance. The DustTrak II ...
-
Manufactured by TSI Incorporatedbased in USA
Truly isolate your aseptic process with the BioTrak Real-Time Viable Particle Counter (a biofluorescent particle detector). An alternative and rapid microbiological method (ARMM) for viable air testing, it combines viable particle counting—also called biofluorescent particle counting (BFPC)—with sample capture capability and ISO-compliant total particle counting to offer a complete ...
-
Manufactured by TSI Incorporatedbased in USA
This Mass Flowmeter is perfect for monitoring flows in your aerosol experimental setups. It measures mass flow rates up to 200 std. L/min, with exceptional accuracy at all flow rates. Plus, it measures flow volume, gas temperature, and absolute pressure. A low pressure-drop minimizes the impact of flow circuit back-pressure on your test instruments. Data appears on the LCD display in real time. ...
-
Manufactured by TSI Incorporatedbased in USA
The PORTACOUNT® Plus is the easy way to reliably fit test tight-fitting respirators. The PORTACOUNT uses a quantitative fit testing method to eliminate the guesswork found with other testing methods and reduce the amount of work associated with fit testing in general. Plus, with convenient FitPlus™ quantitative fit testing software that comes with each instrument, you can streamline the fit ...
-
Manufactured by TSI Incorporatedbased in USA
The 4082 Certifier® FA+ Low Flow Module can be used with the 4080 Certifier® FA+ System, in place of a 4081 Certifier® FA+ High Flow Module. Flow modules contain the calibrated sensors and communicate the measurements to the interface display module. A flow module (4082 Low Flow Module or 4081 High Flow Module) must be used in conjunction with the 4088 Certifier® FA+ Interface ...
-
Manufactured by Sanuvox Technologiesbased in CANADA
Designed to help reduce airborne viruses, bacteria, mold and germs, as well as chemicals and odors. Using a state-of-the-art patented UV technology, this portable air purifier can clean up to 800 sq.ft. The variable speed blower of the Biopür moves the air through a series of filters, then into the reflection chamber so that the air travels parallel to the UV lamp where a germicidal and ...
-
Manufactured by Filquip Pty Limitedbased in AUSTRALIA
Filquip offers a range of filter cartridges for almost any collector unit. Filquip can manufacture filter cartridges to provide a solution to any cartridge filter problem. We pride ourselves on being able to deliver filtration solutions for the dirtiest, stickiest, hottest and nastiest products. Snap ring, Bottom screw-in, Standard plain end, Flanged plain end, Tri-lobe style top cap options ...
-
PremiumManufactured by ENVEAbased in FRANCE
The PCME DM 210 comprises a single compact sensor design with integrated user interface for reliable and robust particulate monitoring for all types of industrial processes. Additional functionality allows the instrument to measure defined units (mg/m³) with QA checks if required by the Process Operator or ...
-
PremiumManufactured by ENVEAbased in FRANCE
Suitable for industrial processes controlled with dry scrubbing and high efficiency bag filtration. The PCME QAL 991 uses unique ElectroDynamic™ Probe Electrification technology, which outperforms alternative probe electrification technologies by extracting a specific frequency band of the induced AC signal. This patented feature ensures confidence in accurate and representative data by ...
-
Manufactured by Steridium Pty Ltd.based in AUSTRALIA
Steridium's range of medical drying cabinets are of the most versatile on the market today - designed with the flexibility to offer a combination of configurations for fast and effective drying of anaesthetic tubes or bellows, instrument trays, bowls, and other miscellaneous medical items and tubes. Available in single door and double door pass through ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you