Only show results available in Virginia? Ok

HEPA Filtration Applications

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Marine Industry

    When ships, submarines and port facilities exposed to the corrosive marine environment need to be repainted, get to clean steel quickly and safely without any messy cleanup using our shrouded power tools! Old paint is removed and packaged in one step using our powerful VAC-PAC HEPA vacuum and deposited directly into 55-gallon drums, safely sealed and ready for transport and disposal when full. No costly containment is required for hazardous jobs, because dust is captured at the surface, before it’s emitted.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Odour removal units for professional kitchen ventilation

    Our company has odour removal units for professional kitchen ventilation, for grills and food preparation areas generally. The operation of the unit is based on chemical or electrostatic filters or a combination of both. The kitchen unit KDSA (with chemical filters) series, neutralizes particles, soot, odors, grease and moisture completely. KDSA units for kitchen ventilation are installed in the cooker hood and are connected with the kitchen areas that produce smoke or where there is smoke and odors such as in kitchen funnels or in washing facilities. The air stream in the deodorizer passes through a set of filters where particles, grease, soot and odors are removed.

    By Dimtech S.A based in Keratsini, GREECE.

  • Premium

    Bio-Hazard and Crime Scene Cleanup

    OmniAire HEPA air filtration machines can remove odors and toxic VOCs released into the air during the cleaning and removal process. OmniAire portable air filtration and purification equipment offers the most efficient and economical solution to reduce toxicity and improve safely for your Bio-Hazard projects. Typically, the standard 99.97% HEPA filter is sufficient, however, if you need the next level of airborne pollutant removal for more toxic applications, such as filtering out VOCs, viruses, smoke and gas molecules, add an OdorGuard Activated Carbon filter.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Disaster and Epidemic Response

    Anywhere there is a large gathering of people, respiratory infections can be acquired due to exposure to airborne pathogenic microorganisms. To help prevent the spread of diseases the Center for Disease Control (CDC) recommends that potential problem areas be isolated and the air purified by portable, HEPA air filtration equipment. OmniAire and OmniAire PAC portable HEPA air filtration machines provide a clean air supply necessary to protect the public in gathering areas such as schools, emergency shelters or temporary healthcare facilities. To comply with CDC guidelines to prevent the spread of disease and contamination of sensitive areas, OmniAire HEPA air filtration machines are commonly used to: -Create a negative air pressure in isolation containment -Supply purified air for required air changes (ACH) -Sanitize airflow in operating and patient’s rooms -Purify air in waiting rooms and public areas -Prevent contamination in compounding pharmacies

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Negative Pressure Environment

    Negative pressure containment is an industry standard method of capturing fine dust particles and mold spores that are inevitably released during mold abatement and restoration projects. Ensuring your contained area has the required air changes (ACH) and that the air is adequately scrubbed is where you will find the competitive advantage of our OmniAire line of HEPA Air Filtration Machines. With standard airflows ranging from 50 to 18000 CFM, OmniAire Air Filtration Machines can provide the necessary ACH for any size project. Maintaining adequately pressurized containment, air changes per hour, and HEPA efficiency are all important to your overall project management needs.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Infrastructure & Civil Industry

    Revitalizing our bridges, railways, seaports, water towers and other aging infrastructure is a growing priority. Make these projects a reality by reducing or eliminating the traditional overhead costs of removing lead paint,
    PCBs and asbestos on a large scale.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Concrete Scabbling

    When concrete is contaminated with PCBs, radiation or other hazards, scabbling is often the only means of remediation. By removing a thin outer layer from a concrete surface, our shrouded power tools can make a structure safer for occupancy or demolition. Our powerful VAC-PAC® HEPA vacuum captures all dust, debris, and air-borne contaminants for easy transportation and disposal in standard 55-gallon (200L) drums. Whether you’re applying a new coating system or  a concrete overlay, a Concrete Surface Profile number (CSP 1-9) is often specified according to ICRI’s Technical Guideline No 310.2R. The examples below illustrate how Pentek tools can achieve your requirements:

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Grinding & Deburring

    Grinding & Deburring dusts are Unbreathable. Many industrial processes generate contaminants in the air in the form of dust and particles. Airborne dust and fine particulate can be hazardous to human health, and should be extracted before it reaches the worker`s breathing zone.? Typical sources of these pollutants arise from cutting, grinding using an angle grinder or die grinder, automated grinding machines, deburring work and many other abrasive processes. Robotic grinding machines generally create a large volume of particulate which can require more filtration media to handle increased dust loads. Whereas other applications such as deburring can create very fine submicron particles that require the use of a high efficiency HEPA filter to capture the fines.? Metal, composite, fiberglass and rubber dust can be extremely dangerous to inhale and can be associated with many different lung conditions and health problems. Diversitech offers a diverse range of dust collectors, extraction arms, filter cleaning machines and downdraft tables for your grinding dust filtration requirements.???

    By DiversiTech based in Montreal, QUEBEC (CANADA).

  • Premium

    Demolition and Construction Projects

    Demolition and construction projects release a combination of dust and bio-contaminants which are irritating and potentially harmful. The dust generated during these projects must be contained and captured. Depending on the risk assessment, HEPA air scrubbers can be used to purify air at a work area or negative pressure containment. HEPA negative air machines can be used to prevent the spread of dust and other contaminates to the outside area. The air filtration equipment, pressure monitors, and purifiers for bio-contaminants are briefly described below with interactive links to more detailed information.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Aerosol and particle technology for filter testing industry

    Nearly 100 test rigs for the quality assurance and the development of filters are being used worldwide with great success.

    By Palas GmbH based in Karlsruhe, GERMANY.

  • Smoke generator device for clean room solutions

    The correct functioning of HEPA filters is normally tested at the time of installation, as well as part of the routine maintenance programme. It is normally recommended that HEPA filters are checked at 14 month intervals or less, or immediately after filter changing. Where high efficiency filters are fitted, it is vital that the filter housing/sealing device does not allow particulate material to pass and thereby compromise the clean room environment that is being served. Testing is necessary since HEPA filters can become partially or totally blocked, rendering the filter of little value.

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • Premium

    Air cleaning system for the healthcare industry

    Indoor Air Quality and advanced environmental control strategies are playing a growing role in patient safety as hospitals and medical care facilities strive to improve wellness metrics and provide the best in healing environments.  Three key factors make attention to indoor air quality particularly important in health care settings.

    By Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you