Hot Gas News
-
Our Gas Analyzer Survived Fire
We always say that our gas analyzers are robust and designed for harsh conditions. Well if there was any doubt, now we have proof that these are the real deal. In late December large fire broke out in a coffee roastery in the heart of Helsinki, fortunately, no one was hurt. But our DX4000 analyzer was in the building and it took a lot of damage. Our client send it to us for inspection and of ...
-
CPI Installs Thermal Oxidizer at Fuel Cell Manufacturer
Catalytic Products International (CPI) installed two (2) 2,600 SCFM Direct Fired Thermal Oxidizers at an East Coast USA fuel cell manufacturer for the abatement of volatile organic compounds (VOCs), hydrogen and carbon monoxide during the fuel cell power conditioning process. A typical fuel cell is an electrochemical energy conversion device used for electricity generation. Fuel cells produce ...
-
New ATEX approved gas sampling coolers for Zone 2
AGT-PSG, world renowned supplier and specialist of gas sampling and conditioning equipment, now offers, in addition to its BCR05 compressor coolers series which provides safe and reliable gas analysis in ATEX zone 1, two new coolers for ATEX zone 2. BCR02 is available with one or two gas paths in one single or dual heat exchanger, BCR03 can be equipped up to 4 gas paths with two dual heat ...
-
Evonik Launches Polyimide Fibers with Improved Mechanical Stability and Flexibility
Evonik has developed a new generation of polyimide fibers for the rising demands of the industry. The new product, brand named P84® HT, is distinguished by improved mechanical stability and flexibility at continuously high operating temperatures. With their unique multilobal cross-section and the largest surface area available in the market, these high-tech fibers from Evonik offer the best ...
-
Evonik launches new polyimide fiber on the market
Evonik has developed a new generation of polyimide fibers for the rising demands of the industry. The new product, brand named P84® HT, is distinguished by improved mechanical stability and flexibility at continuously high operating temperatures. The new polyimide fiber continues Evonik’s three decades of tradition of developing and producing high-performance polymer-based fibers ...
-
Evonik celebrates 35 years of polyimide fiber chemistry at Techtextil 2019
In 1984, for the first time ever, it was possible to spin fibers from the high-performance plastic polyimide. This innovation was embedded by Evonik in the brand name P84® which has stood for high-temperature-resistant fibers for demanding industrial applications ever since. The specialty chemicals company will be celebrating the anniversary at Techtextil, May 14 – 17, in ...
-
Dust monitoring in ambient air to prevent explosion zones in a plant
Application A producer of dry mortar needs dry sand and trass for the production process. Both materials are dried in a hot gas heater at a temperature of 500 °Cbefore they are admixed. The hot gas heater uses brown coal dust as combustion material. The brown coal dust, which is stored in a silo, is transported via a rotary valve in free fall to a distribution plate. From there it is blown by ...
By ENVEA
-
Increased CEMS reliability with direct measurement of H2O
Pollutant gases such as SO2, NO, CO, HF, HCl and dust are products of combustion that are regulated by national environmental protection agencies. Axetris’ laser gas detection module LGD F200 provides an affordable solution for continuous H2O measurement. Continuous Emission Monitoring Systems (CEMS) are used to permanently measure pollutants. All gases have to be corrected and reported at ...
By Axetris AG
-
Dust monitoring in ambient air to prevent explosion zones in a plant
Application A producer of dry mortar needs dry sand and trass for the production process. Both materials are dried in a hot gas heater at a temperature of 500 °Cbefore they are admixed. The hot gas heater uses brown coal […] Application A producer of dry mortar needs dry sand and trass for the production process. Both materials are dried in a hot gas heater at a temperature of 500 ...
By ENVEA
-
Dust Monitoring in Ambient Air to Prevent Explosion Zones in a Plant
A producer of dry mortar needs dry sand and trass for the production process. Both materials are dried in a hot gas heater at a temperature of 500 °Cbefore they are admixed. The hot gas heater uses brown coal dust as combustion material. The brown coal dust, which is stored in a silo, is transported via a rotary valve in free fall to a distribution plate. From there it is blown by an ...
By ENVEA
-
The future of Medical Waste treatment
At Addfield we are proud of the fact that we produce some of the world’s most advanced solutions to Medical Waste Treatment. Our MP range is currently changing the way that medical and clinical waste is being disposed of in many developing countries. This range is trusted by world aid agencies and governments globally and here is a breakdown of why it is so popular. The Addfield MP500 ...
-
The future of Medical Waste treatment
At Addfield we are proud of the fact that we produce some of the world’s most advanced solutions to Medical Waste Treatment. Our MP range is currently changing the way that medical and clinical waste is being disposed of in many developing countries. This range is trusted by world aid agencies and governments globally and here is a breakdown of why it is so popular. The Addfield MP500 ...
-
The Future of Medical Waste Treatment
At Addfield we are proud of the fact that we produce some of the world’s most advanced solutions to Medical Waste Treatment. Our MP range is currently changing the way that medical and clinical waste is being disposed of in many developing countries. This range is trusted by world aid agencies and governments globally and here is a breakdown of why it is so popular. The Addfield MP500 ...
-
Laser Gas Detection TDLS Technology
Axetris uses proprietary technology-enhanced TDLS for gas detection. A 0.05 nm narrow bandwidth diode laser beam is used to scan across an absorption band of the target gas, thus performing a high-resolution near infrared absorption measurement. Laser gas detection, based on Tunable Diode Laser Spectroscopy or TDLS, provides a valid solution to many challenges in environmental gas monitoring ...
By Axetris AG
-
20 year old FTIR gas analyzer finally retires
After almost 20 years of reliable service a Gasmet FTIR multigas analyzer has finally been retired. The instrument, which is a Gasmet 9540 was purchased at the end of the last century by VTT, the Technical Research Centre of Finland. “We have utilised this analyzer in a variety of research projects over the years and it has performed extremely well. However, some of the spare parts are no ...
-
Optomec Showcases Aerosol Jet 3D Printing Systems for Flexible Circuits and Sensors at FlexTech Conference
Optomec, a leading global supplier of production grade additive manufacturing systems for 3D printed electronics announced today that the company will showcase its Aerosol Jet systems for 3D production-grade printed electronics at the SEMI FlexTech conference, held June 20-21 at the Hyatt Regency in Monterey, California, Optomec will be in booth # 2005. In addition to the exhibition Optomec will ...
By Optomec Inc.
-
Advantage by energy efficiency
When you speak of energy efficiency in thermal soil remediation, you cannot get past the VacuDry – technology. econ industries’ VacuDry technology has an energy efficiency of more than 80%. Concretely, 80% of the energy of the source fuel is transferred to the soil as thermal energy. A highly efficient boiler/burner unit ensures an exceptionally effective heat transfer from the ...
-
LGD F200 Platform 2 – “More Possibilities” for field use
In mid-2016, Axetris launched the Platform 2 of the popular LGD F200, with a range of improvements that offer “more possibilities” for use in real-world applications. One such possibility is to configure an additional relay output and alarm available as an analog output. Relay Alarm Configuration The LGD F200P2 comes with a configurable relay output and alarm function as analog ...
By Axetris AG
-
LGD F200 Platform 2 – “More Possibilities” for field use
In mid-2016, Axetris launched the Platform 2 of the popular LGD F200, with a range of improvements that offer “more possibilities” for use in real-world applications. One such possibility is to configure an additional relay output and alarm available as an analog output. Relay Alarm Configuration The LGD F200P2 comes with a configurable relay output and alarm function as analog ...
By Axetris AG
-
Protea Heated Gas Sampling System
For heated gas sampling from up to 4 separate sample points, Protea’s Heated Stream Selection Module (HSSM) is a ready to use 19" rack interface that can be used with Protea’s range of multigas FTIR analysers or any other industrial gas instrumentation. The standard HSSM includes a bank of 4 heated solenoid valves with 1 common outlet, allowing each of the sample points to be ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you