Humidity Control Equipment For Air And Climate In Australia
-
PremiumManufactured by Environics, Inc.based in USA
Purity of gas blends is assured with the Series 4020UHP Ultra-High Purity Gas Mixing/Dilution System. Manufactured with metal seal MFC’s and orbitally welded joints, the system has minimal dead volume and maintains a low leak rate to prevent atmospheric contamination of gas calibration standards. An ideal system for providing those in the semiconductor, aerospace, research/biotech and ...
-
Manufactured by Muntersbased in USA
The M120 desiccant dehumidifier is designed to efficiently dehumidify air. Its very compact construction incorporates sections held together by four bolts. The sections contain fans that are driven by a common motor, a direct gear driven desiccant rotor, and a reactivation airflow heater. The two end casings contain distribution chambers with isolated sections that provide a precise balance for ...
-
Manufactured by Muntersbased in USA
The ComDry series is a range of desiccant dehumidifiers with high drying capacity, reliability and low energy consumption. The solid casing is excellent at withstanding corrosion and the dehumidifiers robustness makes it very versatile in a wide range of applications. They are also easy to stack and transport. Munters ComDry series is particularly suited to water and fire damage restoration ...
-
Manufactured by Muntersbased in USA
The ComDry series is a range of desiccant dehumidifiers with high drying capacity, reliability and low energy consumption. The solid casing is excellent at withstanding corrosion and the dehumidifiers robustness makes it very versatile in a wide range of applications. They are also easy to stack and transport. Munters ComDry series is particularly suited to water and fire damage restoration ...
-
Manufactured by Muntersbased in USA
CELdek evaporative cooling pads are designed to provide maximum cooling, low pressure drop and years of reliable service. It is made from specifically engineered cellulose paper that is chemically treated to resist deterioration and meets the UL Environmental GREENGUARD GOLD certifications emission standards, improving the indoor air quality for both humans and ...
-
Manufactured by BSD Roboticsbased in AUSTRALIA
The BSD300 is a six plate, second generation BSD puncher with over a decade of field proven reliability. The BSD300 has a full feature set including a humidifier system for static mitigation, disk detector system to monitor punching operation, and a barcode reader for sample tracking and output file tracking, light targeting and pattern punching. Optional auto trigger punch activation and dust ...
-
Manufactured by Evapco Inc.based in USA
The CPA-DW integrates Evapco's Critical Process Air (CPA) Systems with a desiccant dehumidifier to meet the demanding requirements of temperature, pressurization and air purity control with humidity and condensation control. Designed specifically for the industrial refrigeration market, CPA-DW offers complete flexibility in design, capacity and features to fulfill the most demanding applications. ...
-
Manufactured by Muntersbased in USA
GLASdek® GX40 is a high efficiency evaporative cooling media that is engineered to provide maximum cooling and humidification, low pressure drop and years of reliable service. The media is made from inorganic, non-combustible material. It allows the use of water straight from the tap with no need for water treatment (i.e. demineralisation plants). In cases with non-sufficient water quality, ...
-
Manufactured by Envirocare International, Inc.based in USA
A wide range of spray nozzles designed to operate at low liquid flow rates to provide excellent results. EnviroCare has a wide range of spray nozzles designed to operate at low liquid flow rates to provide excellent results in both in-duct humidification control applications. Whether conditioning gas prior to an ESP or humidifying gas to increase the reactivity of dry lime injection, we have a ...
-
Manufactured by Muntersbased in USA
The Desiccant System Solution (DSS) offers a wide variety of material and components to fit most difficult applications for indoor and outdoor installation. A complete DSS system, ready for operation, consists in its standard design of components for the pre & post treatment, dehumidification rotor with reactivation and required fans for process and reactivation ...
-
Manufactured by Muntersbased in USA
The ComDry series is a range of desiccant dehumidifiers with high drying capacity, reliability and low energy consumption. The solid casing is excellent at withstanding corrosion and the dehumidifiers robustness makes it very versatile in a wide range of applications. They are also easy to stack and transport. Munters ComDry series is particularly suited to water and fire damage restoration ...
-
Manufactured by Muntersbased in USA
The ComDry series is a range of desiccant dehumidifiers with high drying capacity, reliability and low energy consumption. The solid casing is excellent at withstanding corrosion and the dehumidifiers robustness makes it very versatile in a wide range of applications. They are also easy to stack and transport. Munters ComDry series is particularly suited to water and fire damage restoration ...
-
Manufactured by Bioaction Pty Ltd.based in AUSTRALIA
FiltaOdor Biofilter is a modular biological treatment system for the removal odorous gases and VOC’s. The hazardous gases are fan extracted through a humidification system to raise the relative humidity to > 95%. Gases are evenly diffused through moistened media filter bed where the contaminants are biologically oxidised. Moisture within the filter bed is maintained and controlled by ...
-
Manufactured by Muntersbased in USA
The MC series represents a range of desiccant dehumidifiers with high drying capacity, reliability and flexibility. The solid powder coated Aluzinc casing not only withstands corrosion (class 4) but also makes it versatile for a wide range of applications. The analogue version allows for easy installation and can be equipped with an external humidistat for moisture control and energy saving, ...
-
Manufactured by Muntersbased in USA
The ML1350 desiccant dehumidifier is designed to efficiently dehumidify in low moisture applications. Features include an internally sealed rotor unit, corrosion-resistant casing design, providing a precise balance for dehumidification, reactivation, and heat recovery airflows. The durable Aluzink® frame and access panels are ergonomically designed, allowing simple installation and ...
-
Manufactured by Gradiantbased in USA
Gradiant’s Carrier Gas Concentration (CGC) is used to treat industrial wastewaters in the field – at remote sites and disposal-constrained locations. A multi-stage bubble column is used for humidification, at high heat and mass transfer rates., resulting in clean water vapor released into the atmosphere, and a concentrated brine that reduces overall disposal needs. This serves as a ...
-
Manufactured by Bioaction Pty Ltd.based in AUSTRALIA
FiltaPlus Hybrid Treatment Systems provide the highest level of emission and odour abatement. The two-stage treatment train complements the latest technology in deep bed biofiltration with a second stage carbon filtration vessel. This highly engineered, efficient, low maintenance and cost-effective odour control system is designed to eliminate odorous emissions by over 99.5% while reducing ...
-
Manufactured by Biopac Pty Ltdbased in AUSTRALIA
First a Fast Release with High Level of So2 then a slow release of low level of So2. the generator surface presents small cells which contain the active ingredient sodium metabisulphite (Na2S2O5) when in contact with humidity generate SO2 . ...
-
based in AUSTRALIA
Summary of EVAPX® Technology EVAPX® evaporates wastewater using humidification and dehumidification, allowing evaporation to occur at temperatures lower than boiling point and at atmospheric pressure, reducing the heating required and cost associated with pressure vessels. The distillate produced by EVAPX® is highly pure water, which can be reused or safely discharged to the environment. EVAPX® ...
-
Manufactured by Muntersbased in USA
IceDry is the only dehumidifier that has been developed especially for installation inside a cold store. The tough, cold environment demands new and special features created with the sole purpose of ensuring that the unit runs reliably and energy efficient. One example is the automatic defrosting function. Accumulated ice and frost will gradually evaporate until the store is completely free from ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you