HVAC Monitoring Equipment For Air And Climate Available In Cameroon
-
PremiumManufactured by CO2Meter, Inc.based in USA
The eSense II is a cost-effective carbon dioxide transmitter designed to be installed in areas like office buildings or classrooms where carbon dioxide levels are monitored to determine occupancy levels for energy savings and indoor air ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 mg/m3 of particles with aerodynamic diameters less than 10 microns (mm). The standard has been deemed PM-10, ...
-
Manufactured by Winters Instrumentsbased in CANADA
Suitable for pumps and compressor monitoring, HVAC systems and general industrial ...
-
based in USA
The SiteBoss appliance is an intelligent telecom site automation device for improving the efficiency and resilience of telecom sites and networks. The SiteBoss simplifies and centralizes all the data from a wide range of different makes and models of equipment and sensors at your site, giving visibility and control of those systems. The SiteBoss has a modular design to cost-effectively ...
-
based in BELGIUM
A centralized system is usally built for customer who needs frequent use of their decontamination system. It requires different components: A main cabinet placed in technical area with all electrical and automation components. If fixed injection points are involved, then weighing system cabinet are needed (they could be placed in technical area or the surrounding area of decontaminated rooms). ...
-
Manufactured by Thomas Products Ltd.based in USA
Machine Tool Industry. Waste Water Monitoring. ...
-
Manufactured by Galltec Mess- und Regeltechnik GmbHbased in GERMANY
These sensors have been specially adapted to the needs of the ventilation and air-conditioning sector. The KL and PL series are equipped with gauze filters as standard. Other filters are available on request. Use of capacitive humidity sensor elements is a guarantee of high long-term stability, resistance to dew formation, small hysteresis and good dynamic performanc ...
-
Manufactured by Sensata Technologies Inc.based in USA
The P992 series of pressure sensors incorporates a silicon capacitive sensing element in a compact package. Using a 5 VDC input, the sensors provide a 0.25 to 4.0 VDC output proportional to pressure. Internal temperature compensation provides an accurate, easy to use device. The innovative design eliminates mounting position effects found on other low pressure differential sensors currently ...
-
Manufactured by Marsh Belloframbased in USA
The Marsh Bellofram Type 1000 is an electro-pneumatic transducer that reduces a supply pressure to a regulated output pressure directly proportional to a converted electrical input signal. The Type 1000 accepts a wide range of supply pressures, ranging from a minimum of 3 psig (0.2 BAR) above the maximum output up to 100 psig (6.9 BAR). An integral pneumatic volume booster provides high flow ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
The ExReg controller system has been designed for use in Ex areas for all gases, mists, vapours and dust. In combination with Ex-Max actuators it is a closed loop control system for volume flow control (VAV, CAV), pressure, temperature and ...
-
Manufactured by ISOIL Industria Spabased in ITALY
The MS 3770 ‘insertion’ sensor is suitable for the mounting in non-pressurised pipe lines with diameter ranger from ND 80 to 8000 mm. It is ideal for the pipe lines monitoring and in the HVAC ...
-
Manufactured by Desiccant Rotors International Pvt. Ltd. (DRI)based in INDIA
A paradigm shift is happening in the way the HVAC systems of the building have been designed for ages. RH Control is also being looked at critically even in commercial buildings and the air conditioning design is also being modified to address this. Divide and Conquer concept is becoming more and more popular and handling the building's internal moisture load using Ventilation Air is gaining ...
-
based in USA
The B848-LX panel mount controller is designed to manage equipment in most HVAC control systems with the ease of configuring built-in applications with a BACnet monitor, like the freeware Onyxx® LX UI (requires separate special USB adapter), or a Niagara host. This application specific, BTL-listed automation controller includes an extremely flexible I/O set of 8 analog inputs, 4 analog ...
-
based in SOUTH KOREA
Our CO2 gas sensors get a small deviation unlike NDIR Single type. So they keep long term ...
-
Manufactured by Sanuvox Technologiesbased in CANADA
The BioWall UVC air disinfection system is installed in the return or supply ducting of an HVAC system to disinfect airborne mold, virus, bacteria and carbon based odors. The system is comprised of 5 lamps, each secured in their own parabolic aluminum reflector for maximum UVC intensity. In addition, the BioWall is installed parallel to airflow to achieve the maximum amount of contact time with ...
-
Manufactured by Armstrong Fluid Technologybased in CANADA
Pipe-mounted UL 778 pumping unit with integrated intelligent controls for space-saving installation and superior energy performance. Saves up to 75% in energy over comparable traditional constant speed or variable frequency operated pump installations. Remote services through internet to enhance reliability and sustain optimal performance over life of ...
-
Manufactured by Greenheck Fan Corporationbased in USA
Pre-engineered rooftop unit incorporates a total enthalpy core that provides both sensible and latent heat transfer and meets ASHRAE 90.1 minimum efficiencies. As the enthalpy core has no moving parts, the need for mechanical maintenance and repair is greatly reduced. The unit is ideal for commercial, institutional, and industrial applications requiring low cross leakage and minimal maintenance. ...
-
Manufactured by Ventacity Systems, Inc.based in USA
The SBC100 Smarter Building Controller offers significant savings by providing the best, most feature rich VRF central controller a competitive cost. Compared to other HVAC control systems, the SBC100 requires fewer components and much less integration time. The SBC100 connects a variety of devices to the The Ventacity Cloud over a secure network via LTE or Ethernet, and uses a cloud-based user ...
-
Manufactured by RLE Technologiesbased in USA
The WIFI-CO2 is a single wireless device that measures carbon dioxide, temperature, and humidity. Tracking changes in air circulation allows you to monitor air handling equipment and quickly detect impeded airflow, stalled fans, leaks, blockages, or clogged filters. Use the WIFI-CO2 to measure air circulation and track building occupancy for the comfort and safety of your building’s ...
-
Manufactured by Teracom Ltd.based in BULGARIA
TST100 is a 1-Wire temperature sensor with -40 to +85°C working range and IP65 protection. TST100 is a 1-Wire temperature sensor. The sensors can be used outdoor because of its IP protection. The temperature sensor integrates a band-gap temperature sensor element as well as signals processing for a fully calibrated digital output. Used digital signal processing allows accuracy as low as ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you