Only show results in Virginia? Ok

Incineration Exhaust equipment for Air and Climate

  • Standard Analysis Heating Hose

    Our KLETTI analysis heating hoses are particularly employed in the automotive sector. Depending on the model, these are capable of measuring exhaust gases from 200°C to a maximum of 400°C. Dew point formation is reliably prevented, and the possibility of a distortion of the readings or a clogging of the hose through particles of dirt can ...

    By Kletti GmbH based in Sandhausen, GERMANY. from Standard Analysis Heating Hose Product line

  • Ash Discharger

    The function of an ash discharger is to transport and remove the remaining slag after complete combustion. It also forms the seal between the combustion chamber (low pressure) and the environment outside the incinerator.

    By Jakob Stiefel GmbH based in Wetzikon, SWITZERLAND.

  • V-Type Mini-Pleat Medium Filter

    The glass fibre is water-resistant. The polypropylene plastic frame can be disposed by incineration. It has big filter area, low resistance and long life-span. Its thickness is 290mm, which is suitable for the ventilation air condition systems that the space for installation is limited. The HEPA filter with flanges and multi-pocket filter can be ...

    By Guangzhou KLC Co.,Ltd. based in Guangzhou, CHINA.

  • AAT - Particulate Air Scrubbers

    AAT’s variable throat Venturi Orion Series Particulate Scrubber systems will remove dust and particulates from the air from almost any exhaust source. Our systems range from small point of source units to 50,000 CFM. Our unique design in particulate air scrubbers uses energy efficient geometry, incorporating dual cascading distributors and ...

    By Advanced Air Technologies, Inc. based in Corunna, MICHIGAN (USA).

  • Pilot Control Systems

    Envirometrics can supply a pilot-scale baghouse, scrubber, air stripper, or incinerator for determining design parameters, process applicability, or the performance of new control techniques. The pilot-scale baghouse (shown in use under a tent at a pilot-scale installation) is a MicroPul Binvent (C style) baghouse with 16 four foot long bags ...

    By Envirometrics, Inc. based in Seattle, WASHINGTON (USA).

  • Felix IsoKenetic - Stack Train IST Sampler

    IST Method 5 sampler systems are manufactured to conform with the construction design criteria and specifications cited in US EPA Method 5, Code of Federal Regulations (40CFR Part 60) and APTD-0581 Document. Our source sampler consoles allow operators to monitor gas velocities, temperatures, pressures and sample flow rates in order to maintain ...

    By Felix Technology Inc. based in Concord, ONTARIO (CANADA). from Stack Train IST Sampler Product line

  • Model MIR IS - Short-Extractive In Situ Multi-Gas IR GFC Analyzer

    Short-extractive in situ multi-gas IR GFC Analyzer with built-in sampling system. One single analyzer for the measurement of: NO, NO2, NOx, N2O, CO, CO2, SO2, HCl, HF, CH4, TOC and O2. Direct installation on stack or duct.

    By Norditech Pty Ltd based in Arndell Park, AUSTRALIA. from Short-Extractive In Situ Multi-Gas IR GFC Analyzer Product line

  • D.R. Technology - Opacity Control System

    D.R. Technology can reduce oily smoke and blue haze to invisible emissions. Rapid payback is achieved in comparison to incineration when VOC's are involved.

    By D.R. Technology, Inc. based in Freehold, NEW JERSEY (USA). from Opacity Control System Product line

  • Model Scrubber 55 and Scrubber Tote - Water Scrubbing System

    The Absorbent W water scrubbing system is designed to remove hydrocarbons from wastewater. This system is the most cost-effective way known to quickly and efficiently remove hydrocarbons from water. Simply pour the oil-water mixture in the top and within seconds, clear water is coming out the bottom.

    By Spill Shield International based in Anchorage, ALASKA (USA).

  • Fuji - Model ZRE - Single Beam NDIR Analyser

    This gas analyzer (ZRE) is capable of measuring the concentration of NO, SO2, CO2, CO, CH4 and O2 components in sample gas. NO,SO2,CO2,CO and CH4 are measured by non-dispersion infrared method (NDIR), while O2 is measured by fuel cell, or zirconia method. Up to 5 components including O2 can be measured simultaneously.

    By Australian Dynamic Technologies (ADT) based in Mulgrave, AUSTRALIA. from Single Beam NDIR Analyser Product line

  • Model 275E - Heated Extractive Gas Sample Probe

    The Universal Analyzers Type 275E heated sample probe is designed for continuous use in extractive gas sampling systems. The modular design is used to filter dust and particulate from high dust loaded, high temperature, and high dew point corrosive gas streams. The sample probe is designed with the end user in mind and comes with a no-tools design ...

    By Universal Analyzers Inc. - AMETEK, Inc based in Carson City, NEVADA (USA). from Heated Extractive Gas Sample Probe Product line

  • Model TNP-KL - Vertical Chemical Pump

    The type TNP-KL vertical chemical pump is specifically designed to pump acids, alkalis, chemically contaminated fluids, corrosive media and effluents - in the presence or in the absence of solids - directly from pump sumps, pump tanks, storage tanks or basins. The pump is available for wet-end and dry-end arrangement. The setting depth of up to ...

    By MUNSCH Chemie-Pumpen GmbH based in Ransbach-Baumbach, GERMANY. from Vertical Chemical Pump Product line

  • For. Tec. - Model CA - Incinerators

    Attention for environment is absolute, therefore Fortec. is always looking for new solutions for reduction of emissions coming out into the atmosphere. All incinerators, furnished with special systems, guarantee a gas emission into the atmosphere as by law enacted.The CA ovenis an incinerator with static chamber and it has been designed for small ...

    By Forniture Tecnologiche S.r.l. based in Francolise (CE), ITALY. from Incinerators Product line

  • Lundberg - Thermal Oxidizer Systems

    The Lundberg dedicated thermal oxidizer systems have been developed over the years for harsh industrial environments. Our designs include direct fired oxidizers, regenerative thermal oxidizers, and regenerative catalytic oxidizers. These systems are designed to combust a wide variety of industrial pollutants and to meet or exceed all environmental ...

    By Lundberg, LLC based in Bellevue, WASHINGTON (USA). from Thermal Oxidizer Systems Product line

  • Waste Incinerators & Sorting Systems

    Incinerations Plants have been developed to incinerate organic, com bustible materials and to convert these materials into harmless and disposable residual matter while fully complying with the required environmental regulations; namely EU 2000/76/EC, ABPR, EPA and any other local standards.

    By Kazacioglu Muhendislik LLC. based in Beylikdüzü, TURKEY.

  • Senshang - Sampling Heated Tube

    Sampling heated tube is one important part of the environment protection monitoring system, widely used for SCNR, SNR, waste incineration and other emission sampling.

    By Hunan Senshang Instrument Co.,Ltd based in Yuhua District, Changsha City, CHINA. from Sampling Heated Tube Product line

  • Mediburn - Portable Incinerator

    Environmentally safe, compact and easy to operate, MediBurn is a diesel-fueled medical waste incinerator for hospitals, clinics, pharmacies, laboratories, blood banks, police departments, and veterinarians. Available in two sizes, the original model is capable of disposing of up to 8 cu ft / 0.22 cu m batch-loads of infectious and pathological ...

    By Elastec based in Carmi, ILLINOIS (USA). from Portable Incinerator Product line

  • Model PAS 2000 - Photoelectric Aerosol Sensor (PAS)

    Since 1991, EcoChem has pioneered the use of the Photoelectric Aerosol Sensor (PAS) for real-time measurement of Carbon aerosols. Previous versions of the PAS monitor (PAS 1000i, 1000e and 1002i ) are widely used by regulatory, research and industrial organizations. Incorporating customer feedback and state-of-the-art advances in measurement ...

    By EcoChem Analytics based in League City, TEXAS (USA). from Photoelectric Aerosol Sensor (PAS) Product line

  • MACRO Burn - Cremators

    MACROburn Cremators are manufactured utilising the high standard of technology that has been developed for MACROburn Incinerators. Many years of experience in building tough, rugged, economical, reliable and smokeless incinerators have enabled MACROtech to design cremators that provide outstanding performance and have an exceptional life-span.

    By Saubatech (Pty) Limited based in Northriding, SOUTH AFRICA.

  • Model A 1.0 - Solid Waste Incinerator Thermal Oxidizer

    This incinerator equipment, GEI model A 1.0, is built as a solid waste thermal oxidizer system. The modular, multiple chambered with controlled air A 1.0 incinerator is perfect for the unique demands of mixed composition of solid waste disposal.

    By GEI Works, Inc. based in Sebastian, FLORIDA (USA). from Solid Waste Incinerator Thermal Oxidizer Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you