Indoor Air Sampling Equipment For Air And Climate Available In Ontario
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-30L-BL-Li is a lightweight, small footprint, brushless DC motor powered air sampling system operable from (1) line power, an on-board Li-ion battery or (2) an external 12VDC source such as solar ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DFRV-20L-BL-5Li is a lightweight, small footprint, brushless DC motor powered air sampling system operable from (1) on-board 4500 MAH NiMH batteries (2) line power or (3) an external 12 VDC source such as a 12 VDC battery ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-30L-BL-AC is a lightweight, small footprint, brushless DC motor powered air sampling system operable from (1) line power or (2) an external 12VDC source such as solar ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
For indoor applications, the MerPAS® sampler is deployed without the protective jar housing regardless of Hg air concentration since the sample does not need protection from the elements. Mounting stands may be purchased from Tekran if needed. Sample time is determined by monitoring goals and expected air Hg levels. The yellow body diffusive barrier is used due to better performance at low ...
-
PremiumManufactured by ENVEAbased in FRANCE
Designed to automatically sample particulates on filters using a TSP, PM10, PM2.5 or PM1 inlet. PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible physicochemical laboratory ...
-
Manufactured by EMLab P&Kbased in USA
The EmLite DC Powered Sampling Pump is a battery powered EmLite pump designed for IAQ sampling with low backpressure sampling devices such as spore traps at flow rates from 2-20 ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
The Zefon Bio-Pump Plus is the smallest and lightest portable battery powered IAQ sampling pump available. It provides the simplest and most convenient way to sample with Air-O-Cell® and Via-Cell® cassettes at a flow rate of ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
The Air-O-Cell is a unique air sampling cassette specifically designed for the rapid collection of a wide range of airborne aerosols including mold spores, pollen, insect parts, skin cell fragments, fibers (e.g. asbestos, fiberglass, cellulose, clothing fibers, etc.) and inorganic particulate e.g. ceramic, fly ash, copy toner, etc.). TheAir-O-Cell collects both viable and non-viable sample ...
-
Manufactured by A. P. Buck Inc.based in USA
The Air-O-Cell is a unique air sampling cassette specifically designed for the rapid collection of a wide range of airborne aerosols including mold spores, pollen, insect parts, skin cell fragments, fibers (e.g. asbestos, fiberglass, cellulose, clothing fibers, etc.) and inorganic particulate e.g. ceramic, fly ash, copy toner, etc.). The Air-O-Cell collects both viable and non-viable sample ...
-
Manufactured by A. P. Buck Inc.based in USA
The Allergenco-D IAQ air sampling cassette was developed for the sampling and collection of aeroallergens and bioaerosols for quantitative analysis of mold spores, pollen, skin fragments, insects, combustion particles, toners, enivironmental dusts, construction dusts, and other airborne ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Starter kits are an easy, convenient way to get everything you need to begin sampling for mold. Each kit comes in a convenient toolbox style carrying case and includes basic set-up and use ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
Inner Wall Sampling Adapters for Air-O-Cell® and MoldSnap cassettes. The inner wall sampling adapter consists of a connector that fits over the cassette inlet with a tubing section attached to it that enters the inside of a wall. To use, simply drill a 3/8” hole (preferably by hand). Connect the tubing attachment to the cassette and insert the tube into the wall. Available in packs of ...
-
Manufactured by Zefon International - Antylia Scientificbased in USA
MoldSNAP™ is designed as a first-line mold screening tool that can be easily used by home inspectors to get preliminary information on whether a mold problem may exist and further investigation is ...
-
Manufactured by Nutech Instruments Inc.based in USA
Tedlar bags are recommended in many US EPA methods including TCLP and methods TO-3 (VOCs), TO-12 (NMOC), TO-14A (VOCs), TO-15 (VOCs), ASTM D-5504 (reduced sulfur compounds) and a variety of atmospheric gas ...
-
Manufactured by Gradko International Ltdbased in UNITED KINGDOM
Ammonia diffusion tubes are suitable for long-term monitoring of ambient Ammonia pollution (sampling times are 2-4 weeks). These Ammonia samplers are simple to use, requiring no specialist skills or power supply, making them an efficient monitoring option. With very low detection limits (in the low parts per billion range), even low levels of Ammonia pollution can be ...
-
Manufactured by Xonteck Incbased in USA
X-Timer is designed to automatically start and stop event for unattended, long-term field sampling. The unit is featured with rechargeable battery lasting up to one-charged 240 hours ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
Olfasense is reseller of Kynar and Tedlar sampling bags made from PVDF, offering sizes from 0.5 L to 1000 L. Tedlar and Kynar bags are commonly used for indoor air sampling, waste sites, storage tanks, stack sampling, soil gas sampling, gas blending, calibration test standards, and many other gas sampling needs. Tedlar bags are also recommended by many US EPA methods. The bags can be filled ...
-
Manufactured by Samplebags.eubased in NETHERLANDS
The Tedlar gas sampling bags are made of DuPont’s 2mil Tedlar® PVF film. Tedlar® PVF film is tough, durable, and considered chemically inert to a wide range of compounds. Bags of Tedlar film can be used for indoor air sampling, hazardous waste sites, leaking underground storage tanks, stack sampling, soil gas sampling, gas blending, calibration test standards, and most other gas ...
-
Manufactured by A. P. Buck Inc.based in USA
The BUCK Bio-Culture pump, provides a selectable, continuous, constant sample flowrate and is simple to operate. No tools are required. Its quiet operation allows unobtrusive sampling in IAQ, medical, clean room, public and residential building ...
-
Manufactured by A. P. Buck Inc.based in USA
The BUCK BioAire Model B520 Bioaerosol Sampling Pump is a compact, lightweight 5-20 LPM controlled flow sampling pump for bioaerosol sampling with Allergenco-D and Air-O-Cell cassettes. The easy, fullcontrol keypad lets you perform unattended time programmed (1, 2, 5, or 10 minute) samples, perform easy calibrations without tools, or perform manual timed sampling at the touch of a button. A group ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you