Industrial Air Pollution Control Equipment For Air And Climate Near Europe
-
PremiumManufactured by ENVEAbased in FRANCE
PM10, PM2.5 and PM1 fine dust concentration measurement in the range 0-10,000 μg/m3 using the Standard Reference Method. The MP101M particulate analyzer uses the standard ISO 10473 beta gauge measurement method for the continuous measurement of the concentration of fine dust in ambient air. The instrument is certified equivalent to the reference method in accordance with the EN12341 European ...
-
Manufactured by Dürr Systems, Inc.based in USA
The catalytic filter element concept is a technology that combines the removal of sulfur, nitrogen oxides, and dust using catalytic candle filters (CCFs). The system is therefore based on the catalytic process, but depending on the application it can also fall into the separation process category. The catalytic filter elements allow dust, heavy metals, sulfur oxides and nitrogen oxides to be ...
-
Manufactured by Riedel Filtertechnik GmbHbased in GERMANY
are a proven, industry wide solution for air pollution control. Our HNA venturi scrubber can reliably remove dust from damp exhaust air flows. This wet scrubber is designed for clean gas dust contents of below 5.0 mg/m³ with reasonable energy expenditure. The scrubbing liquid is treated and cleaned via automatic belt filters or time-controlled outlet valves, which empty automatically during the ...
-
Manufactured by Rath Filtration GmbHbased in AUSTRIA
FILTRATH catalytic filter elements were developed especially for use in hot gas filtration. They are manufactured from high temperature wool, are very light and have very favourable differential pressure behaviour due to their high porosity. Their excellent separation performance meets the highest emission ...
-
Manufactured by TASK Industrial Environmental Techniquesbased in BELGIUM
Packing and internals for gas scrubbers and other applications. Packed columns are most frequently used to remove contaminants from a gas stream (absorption). However, packed columns can also be used to remove volatile components from a liquid stream by contacting it with an inert gas ...
-
Manufactured by TASK Industrial Environmental Techniquesbased in BELGIUM
We offer special compact gas scubber for small flows. These are suited for storage tanks, laboratory exhaust, etc. Due to the very compact design, these gas scubbers can be placed everywere. The working principle is similar to that of a large gas scrubber, using a fluid to absorb harmful components from the exhaust air. These gas scrubbers can be used in the field of industrial air pollution ...
-
Manufactured by TASK Industrial Environmental Techniquesbased in BELGIUM
Every given industrial emission flow (regarding pollutants and odour) is different, that's why we always start from scratch and look for a custom made solution for every particular customer, keeping in mind to offer an optimal price-quality ratio. What we aim is a durable, easy to maintain, correctly dimensioned and flawlessly functioning installation. A thourough training of the maintenance ...
-
Manufactured by Begg Cousland Envirotec Limitedbased in UNITED KINGDOM
Begg Cousland have supplied hundreds of highly successful turnkey filtration system installations, used for industrial air pollution abatement, often known as Tail Gas Cleaning or APC equipment. Depending on the application and pollutant, and location of the process plant, we can design the system with any of our filter types, or combinations of – ‘BECOFIL’ Candle Filter Mist ...
-
Manufactured by AirProtekt Limitedbased in UNITED KINGDOM
The industrial catalyst range includes: Standard VOC oxidation catalyst The catalyst has been developed to address the majority of Volatile Organic Compounds ...
-
Manufactured by AirProtekt Limitedbased in UNITED KINGDOM
The industrial air pollution control catalysts favoured by Air Protekt comprise thin-walled honeycomb supports coated with a fine dispersion of Platinum Group Metals, impregnated into a high surface area washcoat. The Platinum Group Metal catalysts, which form the heart of a Honeycat catalytic oxidation system, are derived from well-proven autocatalyst technology and offer numerous benefits ...
-
Manufactured by Olpidürr S.p.Abased in ITALY
The Ecopure CCF concept is a technology that combines the removal of sulfur, nitrogen oxides, and dust using catalytic candle filters ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Widely considered to be the most energy-efficient oxidizer, Anguil's Regenerative Thermal Oxidizer (RTO) uses ceramic media to recover upwards of 97% of the available energy. What makes our RTO so popular is its ability to repurpose the thermal energy generated during operation to reduce operating costs and energy consumption of the system itself. The regenerative component makes it capable of ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Emission Concentrator is an adsorption system designed to concentrate large volume, low concentration process exhaust into a much smaller, higher concentrated air stream. The greatly reduced flow with higher Volatile Organic Compound (VOC) concentration is sent to a thermal or catalytic oxidizer for VOC destruction. The destruction device can then be much smaller in size, significantly ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Catalytic Recuperative Oxidizer destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs) and odorous emissions at significantly lower temperatures than thermal oxidation technologies through the use of ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Direct Fired Thermal Oxidizer (DFTO) thermally destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs) and odorous emissions often discharged from industrial exhaust stacks or chemical processes. It is an ideal abatement technology for process streams heavily laden with pollutants or intermittent batch processes where the oxidizer can come on-line relatively ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil provides a broad line of technologically advanced, yet user-friendly air pollution control products for the abatement of industrial emissions like Volatile Organic Compounds (VOCs), Hazardous Air Pollutants (HAPs), Nitrogen Oxides (NOX) and process odors. Each thermal and catalytic oxidizer product represents a value-engineered system with emphasis on cost minimization for vapor combustion ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
When catalyst is added to the media chambers of an RTO it is then referred to as an RCO. The abatement device still relies on high energy recovery to minimize auxiliary energy usage. However, the VOC compounds will oxidize at lower temperatures with the use of catalyst, further lowering the need for auxiliary energy. This is a great option for catalyst friendly compounds. Multiple catalyst and ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Thermal Recuperative Oxidizer destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs), and odorous emissions discharged from various industrial processes using thermal oxidation and heat recovery. Anguil’s thermal recuperative oxidizers incorporate flexible heat exchanger arrangements, from cleanable tubes ideal for applications with particulates, to shell ...
-
Manufactured by MDSJ Impiantibased in TURKEY
A wet scrubber, also known as a gas cleaner or smoke cleaner, is an air pollution control device designed to remove specific gases, vapors, and particulate matter from the exhaust gases of industrial facilities. It operates by spraying a cleansing liquid onto the exhaust gases in specialized scrubbing towers to absorb, dissolve, or chemically react with the pollutants before they are released ...
-
Manufactured by Alfa-Therm Limitedbased in INDIA
Bag House filters for industrial air pollution control with capacity range 5,000m3/h to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you