Industrial Air Pollution Equipment For Air And Climate Near Kiribati
-
Manufactured by AMETEK Process Instrumentsbased in USA
The WDG 1200/integral electronics Insitu and the WDG 1210/remote electronics Insitu are rugged, reliable flue gas analyzers that use trusted zirconium oxide sensor technology for net oxygen (O2) measurements. The unique sensor design allows the entire sensor assembly, including the heater, to be removed without disturbing the outer protection tube which remains in the process. This makes field ...
-
Manufactured by Eurofins Built Environment Testing EMLab P&Kbased in USA
This cool burning, non-toxic emitter is ideal for air balancing, verifying ventilations, testing smoke alarms, and testing for negative or positive air ...
-
Manufactured by Bakerbased in USA
The Baker NCB™ e3 biological safety cabinet exceeds specifications for the NCI-1 cabinet developed by the National Cancer Institute, with unique design features proven to enhance containment while inhibiting cross contamination and exposure to chemicals, vapors and gases. Patented under the work surface, HEPA filters and the direct exhaust airflow system combined, increases protection from ...
-
Manufactured by Hilltop Distribution, Inc.based in USA
Mold Prevention Spray Outlasts Competitors Non-Toxic. Other Mold Preventers Get Diluted or Rinsed Away When First Exposed To Moisture. Destroys and removes mold and mildew cells and spores. Also easily removes dirt, grease and grime. Biodegradable and non-toxic with zero VOCs, no bleach and no triclosan. Use it as a powerful yet safe daily household cleaner. And as an easy, highly effective mold ...
-
Manufactured by SensoScientific, Inc.based in USA
SensoScientific differential pressure probes are made from ABS plastic and measure within ±0.5 inWC. These high-accuracy sensors monitor bi-directional and unidirectional pressure as well as positive and negative air flow. Differential pressure probes are designed with two mounting slots for easy installation via screws or zip ties. Probes come equipped with an industrial-grade M8 ...
-
Manufactured by SensoScientific, Inc.based in USA
SensoScientific differential pressure probes are made from ABS plastic and measure within ±0.1 inWC. These high-accuracy sensors monitor bi-directional and unidirectional pressure as well as positive and negative air flow. Differential pressure probes are designed with two mounting slots for easy installation via screws or zip ties. Probes come equipped with an industrial-grade M8 ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Rotary lobe compressor-stage with pre-inlet and internal compression. Achieves up to 95 % vacuum in negative pressure operation. Oil-free as per class 0. Discharge silencer without absorption material, low noise levels. Reduced maintenance costs and lower energy consumption for sustainably low ...
-
Distributed by Inline Distributing Companybased in USA
Two operating speeds, 2,000CFM (H) & 1,200CFM (L). Weight: 117 lbs., Including filters. Fast, 'no tools' pre-filter changes. Standard 6'-deep 99.97% HEPA filter. Also accepts 12'-deep replacement HEPA. High-performance motor and blower. Convenient, back panel-mounted controls. Two fixed and two locking 4' swivel casters. Attached exhaust collar for 12' flex duct (flex not included). Molded ...
-
Manufactured by Digitron - part of Rototherm Groupbased in UNITED KINGDOM
Optional colored rubber boots are available for additional protection to multifunctional pressure instruments. It is possible to measure negative pressure (air vacuum) by connecting to the -ve port, provided the +ve port is vented. The value shown will be ...
-
Manufactured by Digitron - part of Rototherm Groupbased in UNITED KINGDOM
Hold, Zero, selectable units, smoothing, lock, Max/Min.IP67 Featuring a 0-1 bar operating range and a 2 bar over range. This unit is also IP67 rated. All prices exclude VAT. Optional colored rubber boots are available for additional protection. It is possible to measure negative pressure (air vacuum) by connecting to the -ve port, provided the +ve port is vented. The value shown will be ...
-
Manufactured by Diversitechbased in CANADA
The Filterhawk Ambient Tower Collector is the latest addition to Diversitech’s series of Filterhawk Cartridge Dust Collectors. Designed to collect and sequester hazardous dust, smoke, fumes and other airborne particulates, the Filterhawk Ambient Tower Collector pulls contaminated shop air through high-efficiency Nanofiber filters, and returns filtered, clean air back into your facility. ...
-
Manufactured by Diversitechbased in CANADA
The Filterhawk Ambient Tower Collector is the latest addition to Diversitech’s series of Filterhawk Cartridge Dust Collectors. Designed to collect and sequester hazardous dust, smoke, fumes and other airborne particulates, the Filterhawk Ambient Tower Collector pulls contaminated shop air through high-efficiency Nanofiber filters, and returns filtered, clean air back into your facility. ...
-
Manufactured by 3Mbased in USA
The 3M™ Half Facepiece Reusable Respirator 6000 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters. When properly fitted and used with approved 3M™ cartridges and filters, this respirator helps provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The swept back ...
-
Manufactured by Sommetricsbased in USA
aerSleep™ is the first product for sleep apnea which is completely non-invasive and does not require connecting tubes or retaining straps. aerSleep™ really does allow you to sleep without limitations. (This product is not currently available in the ...
-
Manufactured by Consolidated Laundry Machinery (CLM)based in USA
Basket: The 105 cu. ft. basket frame is constructed of top quality 10-gauge steel with three main lifting ribs, three secondary lifting ribs, and six removable perforated panels for trouble-free maintenance. The basket is supported by four 10" polyurethane rollers and guided at both ends by four 5" polyurethane rollers. All CLM wheels are equipped with Timken roller bearings and located outside ...
-
Manufactured by Consolidated Laundry Machinery (CLM)based in USA
The 140 cu. ft. basket frame is constructed of top quality 10-gauge steel with three main lifting ribs, three secondary lifting ribs, and six removable perforated panels for trouble-free maintenance. The basket is supported by four 10" polyurethane rollers and guided at both ends by four 5" polyurethane rollers. All CLM wheels are equipped with Timken roller bearings and located outside of the ...
-
Manufactured by Consolidated Laundry Machinery (CLM)based in USA
The 165 cu. ft. basket frame is constructed of top quality 10-gauge steel with three main lifting ribs, three secondary lifting ribs, and six removable perforated panels for trouble-free maintenance. The basket is supported by four 10" polyurethane rollers and guided at both ends by four 5" polyurethane rollers. All CLM wheels are equipped with Timken roller bearings and located outside of the ...
-
Manufactured by Alorair Solutionsbased in UNITED KINGDOM
The AlorAir CleanShield HEPA 550 air scrubber, with the smallest and lightest design, is unbeatable compared with other brands in removing airborne miscellaneous debris at 0.3 microns in size including pollen, plant spores, mold spores, pet dander. Pre-filter, HEPA filter, and activated carbon filter are all adopted in the CleanShield 550. The CleanShield HEPA 550 is absolutely powerful in ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
A revolutionary technology for eliminating odorous emissions and minimizing corrosion in vertical sewer ...
-
Manufactured by Commercial Manufacturingbased in USA
Custom designed positive, negative, and positive-negative air cleaners with different options for feed mechanism, air legs, and collectors are high-volume work horses. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you