Only show results available in Virginia? Ok

Industrial Emissions Applications

  • Premium

    Monitoring solutions for the marine industry

    While land-based industry has been subject to strenuous emissions regulations over the past decades, air emissions from sea-going ships’ machinery has so far been largely unregulated. As a result, according to EU statistics, ships have become the single biggest source of sulphur dioxide (SO2) within the EU. The US EPA (US Environmental Protection Agency) reports similar findings, i.e., that the proportion of air pollutants released which can be attributed to the shipping industry is increasing. MARPOL Annex VI aims to reduce emissions from ships through international regulations, which hopefully will discourage states from enacting unilateral regulations problematic to the shipping industry.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Chemiluminescense based analyzer for automotive applications

    Car emissions have to follow more stringent rules: You will find exactly the right instrument for your application! Analyzers for hot, moist, or cold, dry sample gas, and including simultaneous measurement of NO, NO2 and NOx reading AK protocol. ECO PHYSICS offers a unique range of nitric oxide analyzers for the automotive and related industries, supporting the AK protocol. Whether for hot, moist, raw exhaust gas, or bag measurement, you will find exactly the right instrument for your NO, NO2 and NOx application.

    By ECO PHYSICS AG based in Duernten, SWITZERLAND.

  • Premium

    Industrial stack emission TOC monitoring

    By Pollution Srl based in Budrio (Bologna), ITALY.

  • Premium

    Continuous emissions monitoring for brick plants

    Process control and emissions monitoring in a brick plant is a challenge due to the high concentrations of HF. The HF is generated in the process and gas phase HF can reach 50 mg/m3 or more. To use an extractive system in this environment will demand a lot of maintanence.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Sustainable solutions for oil & gas industry

    thinkstep offers the most comprehensive Life cycle Inventory with over 700 data sets. 200+ data sets on upstream production, processing and transportation, representing different production technologies - primary, secondary, EOR, unconventional (shale, tight, CBM, deep water and oil sands). Natural boundaries - drilling depth or flaring & venting rates, energy efficiency, and water treatment efficiency – are taken into consideration.

    By thinkstep based in Leinfelden-Echterdingen, GERMANY.

  • Premium

    Sustainable solutions for public sector industry

    We give policymakers worldwide a solid foundation of proven methodologies and consistent data to inform and support their sustainability decisions. Show the world what sustainability is really worth. Today’s policymakers strive to make significant contributions to environmental sustainability in their communities and beyond. Having the right sustainability data, processes, and expertise to put viable long-term sustainability initiatives in place is now an essential priority.

    By thinkstep based in Leinfelden-Echterdingen, GERMANY.

  • Premium

    Sustainable solutions for food, beverage and agriculture industry

    The long-term well-being of people worldwide depends on agricultural production systems that can maximise resources without depleting them. The demand for more sustainable agriculture comes from a well-informed public as well as companies all along the supply chain, increasing the pressure to improve very complex systems without decreasing output.

    By thinkstep based in Leinfelden-Echterdingen, GERMANY.

  • Premium

    Odour nuisance assessment for industrial facilities

    Assessment of odour impacts from industrial facilities is increasingly required for planning and IPPC/EPR permitting.

    CERC carries out odour impact assessments to investigate odour nuisance complaints, to predict the likely impact of new and existing facilities, and to evaluate the impact and cost effectiveness of various odour control strategies.

    In order to carry out a robust assessment of odour impact, whether to evaluate a proposed facility or get to grips with an odour nuisance problem, it is important to establish a clear link between the operation of the plant, the resulting emissions and the odour impact.

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM.

  • Premium

    Odour nuisance assessment for agricultural facilities

    Assessment of odour impacts from agricultural facilities is increasingly required for planning and IPPC/EPR permitting.

    CERC carries out odour impact assessments to investigate odour nuisance complaints, to predict the likely impact of new and existing facilities, and to evaluate the impact and cost effectiveness of various odour control strategies.

    In order to carry out a robust assessment of odour impact, whether to evaluate a proposed facility or get to grips with an odour nuisance problem, it is important to establish a clear link between the operation of the plant, the resulting emissions and the odour impact.

    CERC also has experience of bioaerosol dispersion modelling for composting facilities.

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM.

  • Premium

    Sustainable solutions for electronics industry

    Get the power tools to create sustainable success. We have worked with some of the leading technology companies in the world. In fact, thinkstep has completed hundreds of projects with ICT companies, including ecodesign assessments and programs for mobile phones, printers, computers, servers, semiconductors, car electric and electronic systems, e-motors, transformers, and many more products. With 20 years of global sustainability experience, we are deeply engaged in addressing the growing disclosure expectations on product carbon footprints, materials of concern, and labor practices in the supply chain, plus regulations on hazardous materials, toxicity, and end of life management. We don’t merely identify what you need to eliminate; we strategise with you to increase revenue, strengthen supply partnerships, and enhance your brand profile.

    By thinkstep based in Leinfelden-Echterdingen, GERMANY.

  • PLAZKAT systems for treatment of emissions from ferrous and non-ferrous metal working industries

    Metal casting and heat treatment processes are associated with harmful gaseous emissions into the atmosphere which include substances such as carbon monoxide, nitrous oxides, oil vapors and sulfur dioxide.

    By Plasma Air Systems Corporation based in Harju Maakond, ESTONIA.

  • PLAZKAT systems for treatment of food industry emissions

    Manufacturing and processing food products produces emissions that must be treated. Firstly, emissions produced by heat-treating raw materials should be treated, in particular carboxylic acids, formaldehyde and acetone.

    By Plasma Air Systems Corporation based in Harju Maakond, ESTONIA.

  • Power Plant & Power Station Emissions Monitoring

    For more than 25 years, coal and biomass fired plants have formed the largest installed user base for Procal CEM systems. Throughout this period, there has been increasing environmental scrutiny and process upgrades, including the near-ubiquitous use of after-treatment systems such as sophisticated FGD and SCR.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Biomass Plant Emissions Monitoring (CEMS)

    Procal´s analysers are used extensively in reporting and control applications in modern Biomass plants. The flexible and reliable instruments form the heart of the systems, enabling CO, NO2, NO, SO2, H2O, CO2, O2, dust and velocity to be measured.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Paper & Pulp Industry Emissions Monitoring

    The Procal 2000 emissions analyser is ideally suited to the harsh environments associated with Paper & Pulp Plants.  The in situ, multi-component Continuous Emission Monitoring (CEM) system has an integrated auto-zero and calibration facility, thereby removing the need for intervention by maintenance staff under normal conditions.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you