Mass Flow Monitoring Equipment For Air And Climate Available In Vermont
-
ShowcaseManufactured by Fluid Components International LLC. (FCI)based in USA
The MT100 Series is an insertion type, multipoint thermal flow meter specifically designed for large diameter pipes, such as stacks, industrial chimneys, and flues, and large rectangular ducts, such as air feed intakes and HVAC. These large pipe/duct applications are difficult for ordinary flow meters because of distorted flow profiles and lack of straight-run that can lead to inaccurate and ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The MRB500H3E Tritium Bubbler is the state-of-the-art discriminating tritium collection instrument. Sample gas enters the instrument and flows through two (2) standard scintillation counter ready vials filled with ethylene glycol, which retain the HTO component. The sample gas, now less the tritiated water vapor, flows through a heated palladium sponge catalyst bed, which oxidizes the sample gas. ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
For controlling the flow through the ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
B152R41 / B152R41S15: Mass flow measuring system with an additional resettable, adding and subtracting counter. B152R51: Mass flow measuring system ( battery-operated with charge indicator). Battery operation enables an application independent of the power supply. With this device, gas monitoring is just that simple. Gas quantities which are filled in and recovered are registered and can be ...
-
PremiumManufactured by Environics, Inc.based in USA
This "On Demand" gas delivery and blending system will provide cost savings and repeatability of your gaseous atmosphere. The Environics® Series 3000 gas delivery/blending system offers on-site gas blending of 100% pure bulk gases and is configured to provide a solution to using costly premixed cylinders of gas. Unlike premixed cylinders, the Environics Computerized Gas Panel provides a ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The importance of corgon monitoring. We provide flow meters to measure corgon, a mixture of argon and CO2. Corgon is used for instance to optimize the welding process and to increase your weld quality. Prevent waste and inefficient usage of Corgon, as Corgon is an expensive gas. Our Corgon flow meters are easy-to-use and versatile. Get your flow meter in a complete start kit with all you need to ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FS10i is a compact, economical solution to natural gas flow metering. Utilizing application proven thermal mass flow technology, the FS10i provides a highly accurate and repeatable linearized 4-20 mA output of flow rate. It was the first thermal flow meter, and is currently the only one, to comply with SIL 2. Additionally, for applications benefiting from a high or low flow alarm point, the ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 1403 is a reliable, easy-to-use multipoint sampler and doser. It combines with the Innova 1512 photoacoustic gas monitor and a controlling computer featuring the Innova 7650 basic ventilation software to offer numerous monitoring ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The HVP-6000AFC-Series high volume air samplers are housed in a clear-anodized aluminum outdoor shelter. The unit incorporates a touch screen user interface with a maintenance-free, 2 or 3 stage centrifugal blower powered by a brushless, variable speed, maintenance-free motor. The speed of the motor is controlled by a programmable logic controller (PLC) that accepts a signal from a mass flow ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran 2600-IO5 system provides a manual approach to ambient air analysis or other non-flammable gasses. Samples are collected onto gold-coated quartz traps, and then analyzed on the 2600-IO5 instrument to determine Hg content. The Tekran Model 2600-IO5 Mercury Analyzer is designed for the analysis of ambient air sampling cartridges. The system contains an atomic fluorescence detector, a dual ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 4040 is a computerized gas dilution system that automatically generates precise gas standards for rapid multi-point calibration of analyzers. The gas mixes can be used in generating precise gas calibration standards, creating gaseous atmospheres or producing gas mixes for analytical research or production purposes. The Series 4040 can produce gas concentrations from ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multipoint multigas calibrator SONIMIX 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, NOx and O3. With the optional Ozone generator and GPT circuitry it is possible to verify the coherence of NO, NO2 and O3 analysers, and to determine the converter’s efficiency ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Inhalation of vapor is the primary route of elemental mercury toxicity in the workplace environment. The Tekran 2537Xi-IH Industrial Hygiene Monitor provides continual analysis of Hg levels in workplace air in a simple to deploy turn-key unit. This system can be customized according to customer needs including: number of monitoring locations, audible and visual alarms, and site-specific visual ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7100 is a gas mixer mainly used to calibrate and linearize gas monitors and to generate specific gas mixtures. The Sonimix 7100 is based on the principle of gas flow through MFC (Mass Flow Controllers) and is built according the ISO 6145/7 standards. This instrument provides a very high flexibility allowing to combine multigas mixtures (up to 5 gases + a balance gas) and multi-range ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 6123 is the ideal system for those looking for a standard for ozone monitoring and reporting programs who do not need to measure external ozone sources. Units consists of a single chassis supporting a thermal mass flow controllers, an ozone generation module, photometer, static mixer and control electronics. Like the Series 6103, the Series 6123 may also be ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous solids mass flow measurement in dense-stream conveying and high levels of throughput. Designed to measure solid flows during pneumatic dense phase transport. The sensor measures density and speed. No wear thanks to the ceramic inner ...
-
PremiumManufactured by Environics, Inc.based in USA
Purity of calibration gases is assured with the Series 4040 Ultra-High Purity (UHP) Gas Dilution System. Manufactured with metal seal MFC’s and orbitally welded joints, the system has minimal dead volume and maintains a low leak rate to prevent atmospheric contamination of gas calibration standards. An ideal system for providing those in the semiconductor, aerospace, research/biotech and ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 6103 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, O3, hydrocarbons and other gases of interest. The system consists of a single chassis supporting up to three (3) thermal mass flow controllers, an ozone generation module, photometer, glass output manifold, mixing chamber, a reaction chamber for gas phase titration and ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 3310 Elemental Mercury Calibrator allows high level mercury monitoring systems to be accurately calibrated using elemental mercury. It integrates seamlessly with the Tekran Series 3300 speciating CEM, however it can also be used as a stand-alone mercury calibration system. The calibration source allows both multi-point calibrations and standard additions to be automatically ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
ST80 is a high performance, rugged thermal dispersion technology air/gas flow meter that combines ultra-reliable, feature-rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST) with the industry's most extensive selection of application-matched flow sensors, including FCI's new "wet gas" flow element, to provide a truly superior solution for industrial processes and plant ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you