Mass Flow Monitoring Services For Air And Climate Available In Georgia
-
PremiumManufactured by Environics, Inc.based in USA
Calibration of Your Environics System. All Environics systems, with the exception of the Series 7000 Zero Air Generator, are calibrated using a NIST (National Institute of Standards and Technology) recognized and traceable primary flow measurement standard, the Sierra Cal-Bench, Serial Numbers #1010, 1069 or 1089 prior to delivery. ...
-
by Thermochembased in USA
Geothermal Well Testing has traditionally been performed using atmospheric cyclone separators with a James Tube at the inlet to measure total mass flow and a weir box at the outlet to measure brine flow (Figure 1). The James Tube calculation requires enthalpy as an input which can be determined by iteration of the total mass flow and the separated brine flow. This technique has been used without ...
-
Manufactured by Brooks Instrumentbased in USA
How does our comprehensive service offering differ from third-party repair and service providers? At Brooks, we utilize the same metrology standards, work instructions, equipment and custom software as our manufacturing processes used to produce your instrument when it was ...
-
based in USA
While it is important to provide support for new and modern machinery, SoftInWay also offers engineering services for retrofitting and upgrading of existing rotating equipment. Our engineering team has extensive expertise in this field and will provide outstanding results by providing design, optimization and analytical capabilities that exceed ...
-
Manufactured by SmartMeasurement (SMC)based in USA
SmartmeasurementTM is happy to announce that we have improved our flow calibration services. We can provide fully-accredited flow meter calibration traceable to National Institute and Technology (NIST) for our own manufactured liquid and/or gas flow meters as well as other flow manufacturers. Periodic recalibrations are often need to ensure traceable accuracy and repeatability as to their ...
-
Manufactured by Rodan Engineering Company Ltd.based in UNITED KINGDOM
At the heart of any Energy from Waste project lies the Mass-Energy balance which depends on the waste stream to be processed and the technology employed. Rodan implements waste audits to determine a representative characterisation of the waste streams to be processed. The waste streams are then modelled to determine how much can be realistically recovered from the waste for recycling, how much is ...
-
Manufactured by Ceruleanbased in UNITED KINGDOM
The Cerulean Calibration Laboratory has been a feature of the company for many years and has been accredited under ISO17025 since 2001. The United Kingdom Accreditation Service, which oversees the implementation and maintenance of ISO17025 in the UK, carries out surveillance on an annual basis which guarantees continuing conformance with the standard. The methodology used within the Laboratory is ...
-
Manufactured by Axetris AGbased in SWITZERLAND
For mass flow devices, Axetris offers high-quality repairs done by qualified professionals. Additionally, a re-calibration and verification service is provided on customer ...
-
Manufactured by METRA Energie-Messtechnik GmbHbased in GERMANY
Test / calibration stands: We carry out tests and calibrations of flowmeters in a range from 3 l/min to 1,200 m³/h at our officially approved test stations.Prüf- / ...
-
Manufactured by Leomi Instruments Pvt. Ltdbased in INDIA
In today’s competitive era, quality is prime factor. Performance of the meters depend on repeatability and accuracy. To get repeat performance; meter’s performance check by validation and inspection is utmost important. In order to help our customers in getting the optimum process results in their manufacturing facility, LEOMI has introduced the concept of Annual Maintenance Contracts ...
-
Distributed by Strata Controlsbased in CANADA
Compact provers provide a wide turndown 1000:1, quick proving, and less volume to drain at the end of the day compared to conventional pipe provers. ...
-
Manufactured by Aeromon Oybased in FINLAND
Site-level (top-down) information on leakage locations and ...
-
Manufactured by ISOIL Industria Spabased in ITALY
LIBRA DIVISION is Hemina Spa's internal division, more specifically the calibration laboratory, accredited by ACCREDIA, confrom to UNI EN ISO/IEC 17025 norm. The accreditation, obtained in october 2013, allows Libra Division to calibrates Hemina's or third part's flowmeters and to issue the relevant certificates. The calibration is for the following physical quantities : Volume Flow, Volume ...
-
Manufactured by Nucon International, Inc.based in USA
NUCON International Field Service department is a national leader in the testing of Nuclear Air Treatment systems. With over 35 years of experience NUCON’s professional and knowledgeable Field Test Engineers have been responsible for testing and advising at 65 U.S. Nuclear Facilities, as well as various International Nuclear Facilities and U.S. non-nuclear clean-room and safe-room ...
-
Manufactured by Rodan Engineering Company Ltd.based in UNITED KINGDOM
PFDs: Initial process design includes the development of Process Flow Diagrams (PFDs) that schematically convey the mass flows through the system and identify major equipment items. These high level PFDs allow the client to make any required design changes prior to committing to outline ...
-
Manufactured by Bopp & Reuther Messtechnik GmbHbased in GERMANY
We perform tests and calibrations of flowmeters in a range of 3 l / min up to 1,200 m³ / h (0.79 gal/ min up to 317006.5 gal/h) at our certified test benches which are the ...
-
based in USA
During the design process, the real fun begins when your engineering staff has to learn new methods, new equipment, and new practices in order to get that new process to operate efficiently. The time it would take to learn a new process that is not core to your business is very time consuming, and non-productive in terms of the true mission of your organization. ...
-
Manufactured by RKR Gebläse und Verdichter GmbHbased in GERMANY
Your specifications provide us with the basis for determining the right machine type and the ideal design measures for your particular application. RKR specialises in specific industry requirements such as unusual materials, gas compositions, control concepts ...
-
Manufactured by Mellifiqbased in SWEDEN
A proper design, regardless of scope or technology, takes dedication, effort and competency. With versatile background in engineering, project management, automation engineering and technical know-how, Mellifiq offers its clients required support from the start of every project, which provides a solid base for smooth execution, implementation and ...
-
Manufactured by Ebara Technologies Incbased in USA
For over 20 years EBARA has provided rebuild, repair and return services for our competitors’ dry, wet, turbo and cryo pumps. EBARA’s Field Service Team will perform the exchanges, pack & ship, and manage the logistics associated with ensuring success. We will develop and perform all required preventive maintenance for non-EBARA products at the same manor we do with our own ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you