Mist Eliminators Applications in USA
-
Humid, corrosive and malodorous waste gases
Example: Production of bio-ethanol. Similar tasks: Dryers, Fibre board ...
By CTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH Office in Delaware, OHIO (USA).
-
High performance separation system for purify benzene, toluene, and xylene (BTX)
Purify benzene, toluene, and xylene (BTX) from refinery or petrochemical aromatics streams such as catalytic reformate or pyrolysis gasoline. This liquid-liquid extraction processes offers lower capital and operating costs, simplicity of operation, range of feedstock, and solvent ...
By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).
-
High performance separation system for caustic treating industry
The key aspects of a caustic treating system pertain to the degree of contact between the caustic and hydrocarbon to facilitate the mass transfer. Increasing the specific surface area of contact in a two phase system necessarily creates a tight emulsion. The product hydrocarbon often contains entrained caustic, which is not easily recovered by a simple water wash followed by a separator drum. The spent caustic is often regenerated with sour-naphtha stream that is used to extract the disulfide oils into the ...
By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).
-
High performance separation system for coating industry
Reactor products can contain gelatinous, deformable solids form in coating formulation. Batch Process: Limited reactor turn-over (constrained through-put) due to long filtration process. Reduce operating costs and batch cycle time, double capacity and increase online ...
By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).
-
High performance separation system for silicones industry
Silicones are inert, synthetic compounds with a variety of forms and uses. Typically heat-resistant and rubber-like, they are used in sealants, adhesives, lubricants, medical applications, cookware, and insulation. Silicones are polymers that include silicon together with carbon, hydrogen, oxygen, and sometimes other chemical elements. Some common forms include silicone oil, silicone grease, silicone rubber, and silicone ...
By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).
-
Environmental solutions for the engineered wood products industry
The engineered wood products industry relies on Dürr for regenerative thermal oxidizer (RTO), regenerative catalytic oxidizer (RCO), wet electrostatic precipitator (WESP) and wet scrubber technologies for effective control of volatile organic compounds (VOCs), hazardous air pollutants (HAPs), particulate matter (PM), and blue haze from wood dryers and press vents. ...
By Dürr Systems, Inc. Office in Vero Beach, FLORIDA (USA).
-
Industrial manufacturing solutions for the furniture industry
The furniture manufacturing industry includes facilities that manufacture household furniture; office furniture; mattresses, shades, and blinds; custom architectural woodwork and millwork; and institutional furniture. CECO offers a wide range of safe, clean and efficient systems and solutions designed to meet a variety of air emissions and pollution control challenges, including mist elimination; volatile organic compound (VOC) abatement; acid gas scrubbing; dry particulate filtration; and industrial dust, fume, ...
By CECO Environmental Distributor in Frederick, COLORADO (USA).
-
High performance separation system for alkylation unit
The key aspects of an alkylation unit pertain to the amount of acid that needs to be made-up on a continuing ...
By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).
-
Applications and Air Pollutants Removed in the Metal Mining Industry
Complete line of wet scrubbers for all metals mining applications. Scrubbers for removal of acid gases, particulate and mists from acidulation, reaction tanks and dryers. Sulfuric acid, sulfur dioxide, ammonia and hydrogen cyanide removal. Control of micron and submicron size particulate metal fumes from rotary furnaces. ...
By Bionomic Industries Inc based in Mahwah, NEW JERSEY (USA).
-
Automatic fire detection and suppression solutions for manufacturing & machining sector
Uptime is everything. Keep your operation running by protecting your valuable manufacturing and machining equipment. You have a lot of money invested in your machines. Not only that, but in today's competitive environment, uptime is everything. Losing even a day of productivity can mean losing a valuable contract or customer. Precision machine shops can't afford fire damage. That's why over 15,000 shops have decided they aren't taking any chances. Unlike traditional fire extinguishers, Firetrace systems activate ...
By Firetrace International LLC based in Scottsdale, ARIZONA (USA).
-
Industrial manufacturing solutions for the textile mills industry
The textile mills industry includes man-made fiber mills and wool woven fabric mills, carpet and rugs, yarn-spinning mills, non-woven fabric facilities, and tire cord and fabric facilities. These businesses require provide proven emission control solutions, including mist elimination and odor ...
By CECO Environmental Distributor in Frederick, COLORADO (USA).
-
Lime and Limestone solutions for flue gas treatment
Carmeuse’s reputation and recognition as a leader in the industry has grown and we have developed strong alliances and relationships with the companies in FGT processes. We offer our customers applications that utilize lime and chemical grade limestone products that provide the lowest overall cost and significant ...
By Carmeuse Americas Office in Saginaw, ALABAMA (USA).
-
Miscellaneous solutions for the food & beverage industry
The food manufacturing industry contains companies involved in processing raw food materials, packaging, and distributing them. This includes fresh, prepared foods as well as packaged foods. CECO delivers proven products and systems for a wide range of emission control, filtration and fluid handling challenges including volatile organic compound (VOC) abatement; mist elimination; acid gas scrubbing; dry particulate filtration; industrial dust; fume, mist and air handling systems; fluid handling; filtration; and ...
By CECO Environmental Distributor in Frederick, COLORADO (USA).
-
VOC abatement equipments for steel industry
Munters can assist with numerous applications within the Steel industry. From process using mist elimination right through to storage with dehumidification ...
By Munters Distributor in , FLORIDA (USA).
-
VOC abatement equipments for oil, gas & petroleum
The need to remove and separate liquids as well as contaminants is fundamental to the oil and gas industry; from exploration through production, transportation, refining right up to point of ...
By Munters Distributor in , FLORIDA (USA).
-
Oil Mist and VOC Collection
Oil Mist is Unbreathable. Oil based cutting fluids are often used in CNC milling, machining and metalworking. During production, these processes can produce a mist that can threaten sensitive electronic circuitry and presents serious physical risks to employees (accidents from slipping, breathing hazards).? What are the risks in a workshop with oil mist? Exposure to oil mist for a prolonged period of time can cause a number of health issues. Dermatitis Eye, nose and throat irritation Damage to the respiratory ...
By Diversitech Office in San Diego, CALIFORNIA (USA).
-
Dewatering solutions for pulp and paper industries
The cost of dewatering paper. Vooner offers dewatering solutions for paper mills. Dewatering fabric on a paper machine consumes energy to physically remove particles of water. If the vacuum pump is worn and airflow is down to 60% of original, energy and pump seal water is wasted and the white water must be removed thermally from the paper with steam in the dryer section to thermally vaporize the moisture at a much higher use of BTU energy / pound of water removed than used by vacuum pumps. ...
By Vooner FloGard Corporation based in Charlotte, NORTH CAROLINA (USA).
-
Plastic Random Packing for Air Scrubbing
The process of removing unwanted pollutants from a gas stream. Industrial exhaust is moved through a specifically designed vessel typically referred to as a scrubber. The scrubber uses liquid to wash unwanted pollutants from a gas stream. Scrubber designs can vary greatly depending on the type of pollutant being removed from the gas stream, the percentage of removal required and the amount of gas moving through the scrubber. Typically scrubber designs include internals such as random packing, mist eliminators, ...
By KemFlo Canada Inc Office in Houston, TEXAS (USA).
-
High-Pressure Fog Systems for Powerful Environmental Dust and Odor Control
Environmental control presents tough challenges in any industrial workplace – and dust and odor are at the top of the list. Once again, MicroCool high-pressure fog systems are the answer, with the ideal solution for virtually any ...
By MicroCool based in Thousand Palms, CALIFORNIA (USA).
-
BOD and COD Removal
Hydrogen peroxide (H2O2) has been used to reduce the BOD and COD of industrial wastewaters for many years. While the cost of removing BOD / COD through chemical oxidation with hydrogen peroxide is typically greater than that through physical or biological means, there are nonetheless specific situations which justify the use of hydrogen peroxide. These include: Predigestion of wastewaters which contain moderate to high levels of compounds that are toxic, inhibitory, or recalcitrant to biological treatment (e.g., ...
By USP Technologies based in Atlanta, GEORGIA (US) (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you