Multi-Gas Monitoring Equipment For Air And Climate Available In Bolivia
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7050 is a simplified gas mixer based on the principle of gas stream through mass flow controllers (MFC) and mainly used to calibrate and linearize Gas Monitors. Built according to the ISO 6145/7 normalization, the Sonimix 7050 is totally compatible with the US EPA methods and can be easily linked with National Standards (NIST, METAS, UKAS…). The Sonimix 7050 Multi range gas ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7100 is a gas mixer mainly used to calibrate and linearize gas monitors and to generate specific gas mixtures. The Sonimix 7100 is based on the principle of gas flow through MFC (Mass Flow Controllers) and is built according the ISO 6145/7 standards. This instrument provides a very high flexibility allowing to combine multigas mixtures (up to 5 gases + a balance gas) and multi-range ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
LGT-200 laser gas analyzer uses TDLAS technology and long-path reflection technology, which greatly improves the detection limit. It can analyze O2 , CO2, NH3 , CO , CH4 , H2O, HCl, HF, etc, providing a new solution of online measurement of trace gases for natural gas, petrochemicals, environmental protection and steel and other industries. ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Recommended for extractive continuous emissions monitoring. Operating Humidity: Up to 75%. Optical Path Length: 1cm to 10m. Maintenance: IR Source: 1 year, field serviceable; typical 3 to 5 years. Sample Filter: Dependent on application - replace as ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multipoint multigas calibrator SONIMIX 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, NOx and O3. With the optional Ozone generator and GPT circuitry it is possible to verify the coherence of NO, NO2 and O3 analysers, and to determine the converter’s efficiency ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Real-time laboratory quality measurements within a portable package. A true multi-gas analyzer, the Shepherd FTIR standard gas detection libraries are built for common applications, including: air toxics monitoring, hospital and anesthetic gas monitoring , and refinery monitoring. The Shepherd FTIR is also capable of simultaneous monitoring of more than 350 compounds in Cerex’s FTIR ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The F&J Ultra High Volume Air Sampling System incorporates a 46 cm x 57 cm filter holder with a heavy duty centrifugal blower, automatic flow control and the F&J Global Air Sampling System flow measurement electronics. The system is mounted onto a heavy duty metal skid with a modular design to facilitate servicing of individual system components. The large dimension filter holder is ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme WR Series Remote Relay Module operates within a CEL-LS RS-485 gas detection network, acting as an addressable output to the CEL Control Panel. Each WR Relay Module provides 8 relays for the indirect activation of fans, louvers, and other kinds of peripherals, at programmable set ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Recommended for ambient air monitoring applications, waste anesthetic monitoring, anesthetic leak detection, and hospital workplace exposure ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The Multi-Analyser C4 is a battery-operated, compact, user- and maintenance-friendly device which guarantees high measuring accuracy. The unit allows different kinds of measurements and treatment of the measuring ...
-
PremiumManufactured by ENVEAbased in FRANCE
The ENVEA MIR 9000P belongs to the new generation of ENVEA gas monitors, showcasing eco-design, IoT and on board intelligence. It measures simultaneously 8 gases – NOx, SO2, CO, CO2, CH4, N2O, O2 and residual H2O – and uses the non-dispersive infrared method (NDIR-GFC) with gas filter correlation. O2 is measured by a built-in SRM paramagnetic sensor. The analyzer has been designed ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The Multi-Zone Gas Leak Monitor HGM-MZ offers superior performance, flexibility and functionality for low level continuous monitoring of refrigerant gases used in most commercial systems including: Chlorofluorocarbons (CFC / FCKW), Hydrochlorofluorocarbons (HCFC / H-FCKW), Hydrofluorocarbons (HFC / HFKW). Separate monitors are available for Ammonia (NH3 - AGM-MZ) and Carbon Dioxide (CO2 - ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1018 or 1015 Rosette multi-bottle array. Inert gas can be injected into bottle to force retrieved ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME CEW4 series is a microprocessor-based up to 4 channels multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a 900 MHz or 2.4 GHz wireless ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Most sensitive model: This unit offers our lowest detection limits with a standard 17 meter sample path. Depending on your application, the path length may be increased up to 22 meters for a 20% improvement in detection ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
The various output sizes and temperature ranges up to 190 °C of the UT-M enable flexible operation for countless process heat and heating applications. - Efficient heat and process heat for low running costs and emissions - Compact design for easy positioning and quick heating - Flexible use for industrial, commercial and district heating applications with temperatures up to 190 °C - ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1018 or 1015 Rosette multi-bottle array. Inert gas can be injected into bottle to force retrieved ...
-
PremiumManufactured by ENVEAbased in FRANCE
FTIR analyzer in a turnkey cabinet for the measurement of up to 50 parameters, to be selected according to the application. MCERTs certified. Based on the FTIR technology (Fourier Transform Infrared) for simultaneous measurement of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CH4, TOC, H2O, CO2, O2… ...
-
PremiumManufactured by ENVEAbased in FRANCE
Standard Reference CLD method for low & ultra low NOx measurement, IR-GFC for CO, CO2, SO2, N2O, Nox, HF, HCl, TOC and O2 in a single ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Optical, remote sensing, sub parts-per-billion (ppb) to percent level gas analyzer. The Cerex Air Sentry was the first open path FTIR to be commercialized and has continued to lead the industry with reliable performance and innovative features. It performs chemical detection and quantification of compounds using open-path, Fourier Transform InfraRed (FTIR) Differential Optical Absorption ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you