Multi-Gas Monitoring Equipment For Air And Climate Available In Hungary
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 2130 NOx converter tester has been designed to generate a stable NO2 concentration with a small reaction time. It is based on the sonic nozzles technology (ISO 6145-6 technology) and high stability pressure regulators. The NOx converter tester is often used together with a multi-steps gas divider also based on sonic nozzles and high precision pressure regulators. In order to validate ...
-
PremiumManufactured by ENVEAbased in FRANCE
FTIR analyzer in a turnkey cabinet for the measurement of up to 50 parameters, to be selected according to the application. MCERTs certified. Based on the FTIR technology (Fourier Transform Infrared) for simultaneous measurement of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CH4, TOC, H2O, CO2, O2… ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Measure Gases in Ambient and Humid Conditions. Gasmet CX4015 is designed for continuous monitoring applications in ambient conditions, such as workplace air monitoring and quality control applications. It can be used to measure up to 50 components simultaneously, and additional gases can be easily added without any hardware changes. The sample cell can be heated up to 50 °C, which allows ...
-
PremiumManufactured by ENVEAbased in FRANCE
Offers excellent performance for multigas measurements in dry sampling, including HCl, HF, NO, NO2, N2O, SO2, CO, CH4, TOC, CO2 and O2 in process applications or for stack emission compliance. Multi-Gas NDIR-GFC analyzer (Non-Dispersive Infrared Gas Filter Correlation) measuring up to ten gases simultaneously, including Nitrogen Oxide (NO), Nitrogen Dioxide (NO2), Sulphur Dioxide (SO2), Carbon ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
The Cerex UV SENTRY is an open-path gas analyzer that specializes in sensitive detection of key hazardous emissions such as Benzene and Chlorine over 1000+ meters of fence-line paths. It sets the industry standard for time-resolved, gap-less fugitive emissions and chemical emergency monitoring across fence lines, around process units, and around tank farms. As the most cost-effective solution ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7100 is a gas mixer mainly used to calibrate and linearize gas monitors and to generate specific gas mixtures. The Sonimix 7100 is based on the principle of gas flow through MFC (Mass Flow Controllers) and is built according the ISO 6145/7 standards. This instrument provides a very high flexibility allowing to combine multigas mixtures (up to 5 gases + a balance gas) and multi-range ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet CX4000 is an industrial multicomponent gas analyzer for continuous monitoring applications, such as continuous emission monitoring (CEM). It can be used to measure up to 50 components simultaneously, and additional gases can be easily added without any hardware changes. The corrosion resistant sample cell is heated up to 180 °C, which makes CX4000 an ideal tool to analyze trace ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1018 or 1015 Rosette multi-bottle array. Inert gas can be injected into bottle to force retrieved ...
-
PremiumManufactured by ENVEAbased in FRANCE
One single analyzer for the measurement of up to 50 parameters, to be selected according to the application. MCERTs certified. Based on the FTIR technology (Fourier Transform Infrared) for simultaneous measurement of: HCl, HF, NH3, NO, NO2, N2O, SO2, CO, CH4, TOC, H2O, CO2, ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Notable Features: One Calibrator: Multiple Flow Sensors. Vacuum Fluorescent Display (4 lines×24 characters). 4 button key pad for stand alone operation. Mass flow or Volumetric flow. Volume Totalization Feature. Operator selectable Reference T and P. Operator selectable engineering units. Multi gas option. ± 1.0% Full Scale (F.S.) Accuracy. User customizable calibration report. ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Recommended for extractive continuous emissions monitoring. Operating Humidity: Up to 75%. Optical Path Length: 1cm to 10m. Maintenance: IR Source: 1 year, field serviceable; typical 3 to 5 years. Sample Filter: Dependent on application - replace as ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1018 or 1015 Rosette multi-bottle array. Inert gas can be injected into bottle to force retrieved ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The Multi-Zone Gas Leak Monitor HGM-MZ offers superior performance, flexibility and functionality for low level continuous monitoring of refrigerant gases used in most commercial systems including: Chlorofluorocarbons (CFC / FCKW), Hydrochlorofluorocarbons (HCFC / H-FCKW), Hydrofluorocarbons (HFC / HFKW). Separate monitors are available for Ammonia (NH3 - AGM-MZ) and Carbon Dioxide (CO2 - ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
The various output sizes and temperature ranges up to 190 °C of the UT-M enable flexible operation for countless process heat and heating applications. - Efficient heat and process heat for low running costs and emissions - Compact design for easy positioning and quick heating - Flexible use for industrial, commercial and district heating applications with temperatures up to 190 °C - ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The GasLab Plus CM-504 is a Multi-Gas Detector designed to measure carbon dioxide (CO2) and carbon monoxide (CO) concentrations in a variety of applications. With long-term data storage, the user can measure ambient gas levels by data displayed and gain indication by visual and audible alarm settings. ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Notable Features: Vacuum Fluorescent Display: (4 lines×24 characters). 4 button key pad for stand alone operation. Mass flow or Volumetric flow. Volume Totalization Feature. Operator selectable Reference T and P. Operator selectable engineering units. Multi gas option. ± 1.0% Full Scale (F.S.) Accuracy. User customizable calibration report. Semi-Automatic calibration-verification ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME CEW4 series is a microprocessor-based up to 4 channels multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a 900 MHz or 2.4 GHz wireless ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 340 is the ideal tool to confirm proper set-up and to identify emission problems before they get serious. Oxygen is the base sensor in all Testo 340 Analyzers. Simply add one, or up to three sensors for your specific job. This combustion analyzer can be configured in many ways for commissioning commercial boilers, testing engines in midstream gas pipelines, tuning industrial burners ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme GasPost II toxic gas sensor/transmitter measures CO and NO2 gas concentrations in enclosed areas and transmit its readings to a CEL-series monitor/controller over an addressable RS-485 “Daisy-Chain” sensor ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A compact, reliable multi-gas analyser for measuring flue gas emissions in processes burning natural gas and biomass. The FGA provides accurate, reliable measurement of carbon monoxide, nitric oxide and oxygen in flue gases. It is an integrated solution for Continuous Emissions Monitoring Systems (CEMS) applications in smaller combustion ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you