Multigas Monitoring News

  • Analytik Jena multi N/C ® Series in New Color Design and With Extended Long-Term Warranty

    Since the middle of August 2017, Analytik Jena has offered their customers the multi N/C® series not only in a new red/white design but also with a special ten-year warranty for the furnace in combustion-based TOC analyzers, such as the multi N/C® 2100 (S), the multi N/C® 3100 and the multi N/C® pharma HT. For the multi N/C® pharma UV and multi N/C® UV HS, which ...


    By Analytik Jena AG

  • Optimize and Calibrate Your Combustion Gas Analyzer with E Instruments Before the New Heating Seasons Arrive

    With August waning on the eve of the solar eclipse, we are reminded again that summer is ending. Now, as the temperatures are cooling down, it is an excellent opportunity to recalibrate your E Instruments combustion gas analyzer and have it ready for the upcoming heating season. Professional and Quality Support At our ...

  • 20 year old FTIR gas analyzer finally retires

    After almost 20 years of reliable service a Gasmet FTIR multigas analyzer has finally been retired. The instrument, which is a Gasmet 9540 was purchased at the end of the last century by VTT, the Technical Research Centre of Finland. “We have utilised this analyzer in a variety of research projects over the years and it has performed extremely well. However, some of the spare parts are no ...


    By Gasmet Technologies Oy

  • The Air Quality & Emissions Show Gallery

    Protea exhibited at the Air Quality and Emissions Show in Telford on May 24th to 25th at stand numbers 13 & 14. This was the 9th Air Quality & Emissions exhibition and focused on industrial emissions and stack monitoring.  ...


    By Protea Limited

  • New White Paper & Video on FTIR multigas analysis

    Gasmet Technologies has published a free White Paper and a video on the simultaneous measurement of multiple gases in a wide variety of applications using FTIR. Both the video and the White Paper can be found at www.gasmet.com or by visiting the Quantitech stand 62/63 at AQE 2017. With the ability to measure ...


    By Gasmet Technologies Oy

  • Protea at the Air Quality & Emissions Show (May 24th & 25th - 2017) in Telford

    Protea will be presenting at the Air Quality and Emissions Show in Telford on May 24th to 25th at stand numbers 13 & 14. The 9th in the series of Air Quality & Emissions Events will focus on industrial emissions and stack monitoring of (Part A) processes regulated by the Regulators of the United Kingdom and North Ireland, ambient air quality monitoring, the emissions to air of Part A2 and ...


    By Protea Limited

  • Toxic gas analysis - new video, white paper and case study

    Dangerous levels of toxic gases in freight containers represent a major threat to port and transport workers, customs officials, warehousemen, store employees and consumers. However, the risks posed by these gases can be effectively assessed with Gasmet FTIR multigas analysers. Gasmet has therefore published a video, a white paper and a case study; providing comprehensive help and advice for any ...


    By Gasmet Technologies Oy

  • Biomass Combustion Research

    The use of alternative combustion fuels that provide a renewable source of energy is a major area of research and investment. Sources of biomass fuels include virgin wood, energy crops, agricultural residues, food waste and industrial waste. Controlling the combustion process of any new fuel and keeping track of the biomass fuel emissions of combustion by-products is important to users of these ...

  • BTU1500 “All-In-One” Combustion Analyzer Named a Top Tool of 2016

    Since the beginning, we here at E Instruments have sought to remain innovative and provide our customers all over the globe with products that do more than the bare minimum. Well, our hard work has paid off, and it’s not only helped us to expand our customer base, but it’s also helped our devices to be recognized by many prominent organizations. In fact, we're elated to announce that ...

  • BTU900 Economical 2 or 3 Gas Analyzer

    BTU900 Economical 2-3 Gas Analyzer - Residential Combustion Analyzer The NEW BTU900 Economical Residential Combustion Analyzer is the most advanced unit to meet the growing needs for Boiler & Burner Set-Ups, Servicing, & Maintenance.  Now available are field replaceable sensors for easy diagnostics and replacements to ...

  • CitiSafe Pte Ltd is proud to represent new products from RC Systems Inc.

    Gas and Flame Detectors Our SenSmart 6000, 3000 and 1100 Gas Detectors offer 4-20mA, modbus RTU or modbus TCP wired interfaces. The SenSmart 6000 has a vivid color readout and standard ethernet. The SenSmart 3000 supports both 2 and 3-Wire 4-20mA operation.The SenSmart 1100 is a low cost 2-Wire 4-20mA toxic/oxygen detector all contained inside the sensor head. Our Gas Detectors ...


    By CitiSafe Pte Ltd

  • New White Paper on FTIR multigas analysis

    Gasmet Technologies (Finland) has announced the publication of a free White Paper on the simultaneous measurement of multiple gases in a wide variety of applications using FTIR (Fourier Transform InfraRed) technology. With the ability to measure almost any gas, FTIR monitoring technology is employed in an enormous variety of applications including Continuous Emissions Monitoring, Stack ...


    By Gasmet Technologies Oy

  • Introduction offer from NEO Monitors; LaserGas III SP CO Combustion analyzer

    NEO Monitors is presenting another great campaign, valid from November 15th to June 30th. The new LaserGas III CO Combustion is a new multicomponent analyzer targeting combustion control on boilers, process heaters, fired heaters and others. It is one of the most compact TLAS analyzers that is certified for use in all zones (except ZONE 0) making it ...


    By NEO Monitors AS

  • Combustion analyzer for rough environments

    Based on decades of experience and customer feedback, NEO Monitors has designed an Ex-d certified tunable diode laser (TDLS) analyzer. The instrument is based on the proven LaserGas™ III platform, and is for those that need CO-monitoring in combustion processes. In combination with LaserGas™ III SP O2, the analyzer is the answer to any combustion process where ...


    By NEO Monitors AS

  • Advanced Multigas FTIR for R&D, Hospital , CEM’s, R&D

    ETG PROTEA is a high resolution, compact FTIR analyser packaged in a 19” rack mountable case. This FTIR uses the latest in interferometer technology to provide a compact and high performance instrument. With a high resolution (1cm-1), atmosFIR is ideal for gas identification and speciation. It has an in-built “sampling system” – inlet filter, purge valve, cell temperature ...

  • TUV Success for GCEM40 Series Gas Analyser

    CODEL International has recently obtained TUV certification for its multi-channel in-situ gas analyser, the 40 Series. This latest generation gas analyser has been proving it’s self in the far eastern markets where it has achieved much success. With the recent addition of TUV certification CODEL now intend to introduce the 40 Series analyser into the European ...


    By Codel International Ltd

  • Cerex Introduces the New AirSentry FTIR Open Path Analyzer

    Cerex Monitoring Solutions is pleased to announce the release of the third generation model AirSentry FTIR multi-gas open path FTIR analyzer. The decision was made to fully redesign the analyzer to take full advantage of advances in hardware and software technology. The third generation design represents a full reconfiguration of the instrument. Goals were to reduce initial and operating costs ...

  • The Highest Levels Of Performance & Accuracy In Multigas Analysis

    Measure any gas, in any background, with our range of analysers for research, process and emissions. With 20 years’ experience in FTIR gas analyser application and manufacture, Protea can provide the complete gas analysis solution. atmosFIR New Range of high resolution multigas FTIR 19 inch rack or portable versions, for fixed, mobile and integration. PotIR 204M MCERTS approved ...


    By Protea Limited

  • CETCI has the perfect gas detector system for your application!

    Critical Environment Technologies Canada Inc. (CETCI) is thrilled to introduce our new line of gas detection products that offer more features, greater functionality and superior value. The QCC Quad Channel Controller, is perfect for small to medium sized gas detection applications such as monitoring CO, NO2 and combustible gases in car parks; refrigerants, ...

  • USA Engines manufacturer renews its confidence in Environnement S.A.`s EGAS 2M monitoring systems

    Fully satisfied with its 2 turnkey EGAS 2M Systems provided by Environnement S.A in 2014, a leading Engine Manufacturer in the United States places a new order for a new EGAS turnkey cabinet. The EGAS 2M engine exhaust gas analysis system is the only system on the market allowing the measurement of 1 or 2 independent streams in a single analysis cabinet. Designed to measure ...


    By Environnement S.A

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you