Nitrous Oxide (N2O) Monitoring Equipment For Air And Climate Available In British Columbia
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 3433i is a highly accurate and reliable multi-gas monitor with a special configuration for Exhaust Gas or SHED evaporative testing. The measurement system, based on the photoacoustic infrared detection method, is capable of measuring almost any gas that absorbs infrared light. Gas selectivity is achieved through the use of optical filters. Selectively measures a wide ...
-
PremiumManufactured by ENVEAbased in FRANCE
A complete “all in one compact” system, for multi-gas measurements, based on the field-proven MIR 9000 analyzer and on-board SEC sampling ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
FT-3000 is a gas online continuous monitoring system based on fourier transform infrared spectroscopy, monitoring emission gas of SO2, NOx (NO NO2), CH4, NH3, HCl, HF, CO, CO2, O2, H2O and other components at the same time. According to user demand, the analyzer can be extended to measure SO3, N2O and etc. It has high accuracy, wide dynamic range, low detection limit and is suitable for ultra-Iow ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Nitrous oxide (N2O) is a man-made green house and ozone depletion gas. Emissions from agriculture are the main source, followed by industry and energy plants. Although the concentration of N2O in the atmosphere is relatively high (330 ppbv), the day and night fluctuations are small and so are seasonal differences. Therefore, highly sensitive and stable instrumentation is needed to monitor N2O ...
-
PremiumManufactured by ENVEAbased in FRANCE
Standard Reference CLD method for low & ultra low NOx measurement, IR-GFC for CO, CO2, SO2, N2O, Nox, HF, HCl, TOC and O2 in a single analyzer. Fast and simultaneous measurements of up to 10 gases, available in 2 versions: NOx (CLD) and O2 (Paramagnetic) in 19’’ Rack or Tight box for low and ultra-low NOx monitoring. CO, CO2, SO2, HCl, HF, TOC, N2O (IR) + NOx (CLD) + O2 ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
System 400HWE Hot Wet Extractive is based on OPSIS UV/FTIR DOAS system giving fast response and best possible performance for all gases. The high resolution FTIR system is free from interference from all gases including ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
LEA300 series gas analyzer is an infrared gas analyzer independently developed by our company for environmental monitoring and industrial site emission gas analysis. The analyzer mainly measures CO, CO2, CH4 ,N2O and O2 gas concentrations, and has the characteristics of high measurement accuracy, high stability and reliability and fast response ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
Based on FTIR technology, FT-2000P portable gas analyzer can continuously monitor various kinds of components in the emission, such as SO2, NOx (NO, NO2), CH4, NH3, HCl, HF, CO, CO2, O2, H2O. According to actual measuring need, it can be extended to measure other components, like SO3, N2O and etc. This portable system mainly comprises FTIR analyzer and sampling probe. It has features of high ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 5000 is state-of-the-art Continuous Emission Monitoring System, and is designed for a wide variety of stationary emission monitoring applications. The IMR 5000 is a stand-alone analysis system that works automatically. Available in a 19” rack mount or rugged wall mounted enclosure. The wall mount enclosure meets NEMA type 4X (IP65) standards. The modular approach of the IMR 5000 ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
System 400FL combines the benefits of hot wet extractive and in situ. The gas is moved at high speed in a bypass line. No filter or probe is used and the measurement takes place in a non-contact measurement ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The PGM-IR is an advanced portable monitor that uses long-life non-dispersive infrared (NDIR) sensor technology for analyzing and checking low-level gas leaks. With very fast response and clearing times, the unit can identify and pinpoint very small levels of refrigerants, nitrous oxide or carbon dioxide gas in ambient air, showing real-time concentrations in either parts per million (ppm) or ...
-
PremiumManufactured by ENVEAbased in FRANCE
The ENVEA MIR 9000P belongs to the new generation of ENVEA gas monitors, showcasing eco-design, IoT and on board intelligence. It measures simultaneously 8 gases – NOx, SO2, CO, CO2, CH4, N2O, O2 and residual H2O – and uses the non-dispersive infrared method (NDIR-GFC) with gas filter correlation. O2 is measured by a built-in SRM paramagnetic sensor. The analyzer has been designed ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Automated online analysis & monitoring of Sulphur Compounds: H2S / COS / CS2 / SO2 / RSH Chroma S is a fully automatic isothermal gas Chromatograph for the analysis & monitoring of sulphur ...
-
PremiumManufactured by ENVEAbased in FRANCE
The MIR 9000P belongs to the new generation of ENVEA gas monitors, showcasing eco-design, IoT and on board intelligence. It measures simultaneously 8 gases – NOx, SO2, CO, CO2, CH4, N2O, O2 and residual H2O – and uses the non-dispersive infrared method (NDIR-GFC) with gas filter correlation. O2 is measured by a built-in SRM paramagnetic sensor. The analyzer has been designed to meet ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
GT6000 Mobilis — a complete emission monitoring system packed into a sturdy, portable device. Combining portability with high performance, the GT6000 Mobilis is a revolutionary emission monitoring system that can streamline measurement processes and save you a whole lot of time and effort, be it in a stack, a lab, or on the field. We designed the GT6000 Mobilis so that the setup, measurements, ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
Designed to measure flue gases on: Boilers, Burners, Engines. Developed to meet the customers need. High quality combustion gas analyzer using the latest sensor technology. Easy to use and measures all the important parameters to adjust and optimize the combustion process. Integrated Printer: each printout includes all information on the display. Applications: Boilers, Burners, Engines, Turbines, ...
-
PremiumManufactured by ENVEAbased in FRANCE
Standard Reference CLD method for low & ultra low NOx measurement, IR-GFC for CO, CO2, SO2, N2O, Nox, HF, HCl, TOC and O2 in a single ...
-
Manufactured by PID Analyzers, LLCbased in USA
Photoionization (9.5, 10.0, 10.6, 11,7 eV ppm, ppb), Infrared CO2 CH4, N2O, Electrochemical -H2S, CO , HCN, Cl2, PH3, AsH3, ETO, formaldehyde... PID ppm/ppb + 4 more sensors 6 sensor PID. From the developers of the first PID in ...
-
Distributed by Diamond Scientific - Authorized Distributorbased in USA
The G200 N2O analyzer is designed to saftey check background and breathing zone levels of N2O (0-1000ppm) in medical applications with internal ...
-
Manufactured by Wahlco, Inc.based in USA
WAHLCO’s Urea to Ammonia (U2A) generation system is a patented process that effectively converts urea to ammonia on site “on demand” and eliminates the transportation, transfer and storage of significant volumes of toxic ammonia. The U2A System basically reverses the process used to make urea. A urea solution is fed into a reactor, where it is heated under pressure to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you