NOx Control Applications available in Guyana
-
Premium
Chemiluminescense based analyzer for automotive, aviation, marine, and combustive engines sector
Focuses on high NOx, NOx-related and multigas-concentrations up to 10’000 ppm. Parameters included are NO, NO2, NOx, NH3, NOx-amines, O2 and CO2. The applications are characterized by demanding sample gas conditions, such as in automotive, aviation, naval, or combustive engine emissions, as well as in catalyst production. ...
By ECO Physics AG based in Duernten, SWITZERLAND.
-
Premium
Marine monitoring solutions
Marine monitoring is a variant of OPSIS general offers for continuous emissions monitoring (CEM) and process control. The special operating conditions on-board vessels call for special measures to comply with regulations and expectations. However, OPSIS has mastered this environment and has for many years successfully delivered systems for marine ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Process monitoring solutions for NH3 truck engine monitoring
A new EC regulation states that diesel engines need to have active cleaning with urea injection in order to reduce NOx emissions. In order to control the urea dosage, a reliable measurement system is required. OPSIS LD500 laser diode gas analyser for monitoring ammonia (NH3), has been tested and approved by German TÜV, in accordance with the EURO VI ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Gas analyzers and monitoring systems for Raw gas measurements
Raw gases are untreated flue gases that have not passed through an emissions control technology system like selective catalytic reduction (SCR) or selective non-catalytic reduction (SNCR). They are generally measured for the sakes of process control and warranty tracking. Typically only a few components are measured but fourier transform infrared spectroscopy FTIR technology allows the measurement of all ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Environmental Data Monitoring Solutions for Air Quality and Emission
There are two types of stationary air pollution sources: Point source pollution (boiler rooms, process, power stations, etc…). Surface pollution (landfill sites, farms, etc…). The main pollutants concerned are mercury, NOx (produced by combustion), VOCs, heavy metals, dioxins (mainly produced by incineration plants), as well as smells (e.g. treatment of co-products in the food processing industry). ECOMESURE provides instruments that measure the pollutant concentration coming out of industrial sites ...
By Ecomesure based in Saclay, FRANCE.
-
Premium
Chemiluminescense based analyzer for industrial sector
Focuses on medium NOx, NOx-related and multigas-concentrations up to 5’000 ppm where flexibility is a central requirement. Parameters included are NO, NO2, NOx, NH3, NOx-amines, O2 and CO2. Typical supported applications are industrial emission monitoring and gas manufacturing control. ...
By ECO Physics AG based in Duernten, SWITZERLAND.
-
Premium
Gas monitoring instruments and systems for process NOx measurement
Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Flue gas denitration on-line continuous monitoring solution
Nitrogen oxide (NOx) is one of the main sources of air pollution, not only it has significant influence on global warming, but also involved in the destruction of the ozone layer. Technical measures to control NOx emissions can be divided into two categories: one is so-called source control, the characteristic is by a variety of technical means, to control NOx generation in the process of combustion reaction (i.e., low NOx combustion technology). Another kind is the so-called tail control, the characteristic is ...
By Hangzhou Chunlai Technology CO., Ltd. based in Hangzhou, CHINA.
-
Premium
Gas monitoring instruments and systems for titanium dioxide
Titanium dioxide is the most important white pigment used in the polymer industry. It is widely used, because it efficiently scatters visible light, thereby imparting whiteness, brightness, and opacity when incorporated into a plastic ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Continuous emissions monitoring solutions for steel plants
The nature of steel manufacturing processes places severe limitations on the monitoring methods that can be used. Aggressive environments combined with high levels of particulates and gases make the choice very ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Emissions testing for engines
Rich-burn engine exhaust, when uncontrolled, can have wide concentration ranges and both CO and NOX can fluctuate significantly. The on-board CO dilution system will automatically set-up for optimum testing, perfect for a rich burn engine. Lean-burn engines have different exhaust characteristics, but NO2 can make up a significant portion of the total NOX measurement. The 350 measures both NO and NO2 for proper lean-burn engine set-up. Due to high concentration, replaceable interference filters keep the sensors ...
By Testo, Inc. based in West Chester, PENNSYLVANIA (USA).
-
Premium
Gas monitoring instruments and systems for DeNOx process control
In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Chemiluminescense based analyzer for environmental, ambient Air and research sector
Focuses on low NOX and NOX-related concentrations up to 100 ppm where high resolution is required. Parameters included are NO, NO2, NOX, NH3, NOX-Amines and NOY. Target applications are ambient air monitoring, indoor measurement, clean room measurement and atmospheric ...
By ECO Physics AG based in Duernten, SWITZERLAND.
-
Premium
Marine monitoring solutions for the SO2/CO2/NOx monitoring
Process control of a SO2 scrubber on a ship is a challenge due to wet and corrosive gases. In such environment, extractive gas sampling systems require high levels of maintenance in order to operate correctly. OPSIS monitoring system solves this by using an optical, non-contact, cross-duct technique. A light beam is sent across the duct or stack to be measured, and the captured light is sent through an optical fibre cable to an analyser. The analyser measures SO2, CO2 and NOx concentrations using UV and IR ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Air pollution control for the renewable fuels industry
Maintain Uptime and Profit Margins. Anguil’s engineering expertise and flexible solutions hold up to the rugged production demands of ethanol, biofuel and renewable energy facilities. Our solutions are quality engineered so that you can focus on ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Gas analyzers and monitoring systems for fertilizer and nitric acid production sector
Nitric acid is manufactured from ammonia and is a key chemical in the manufacture of fertilizers. This is the main reason why nitric acid is produced in such large quantities. The production process of nitric acid produces nitrogen oxides (NOx), ammonia (NH3) and nitrous oxide N2O ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Insitu Flue Gas Desulfurization - DeSOx Analyzer
The Cerex UV3000P in-situ multi-gas analyzer for DeSOx, DeNOx, Ammonia Slip and general ...
By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).
-
Premium
Air pollution, emission and process monitoring systems for power generation
ENVEA’s involvement with the Power generation industry over many years has led to the development of a unique range of process optimization solutions, as well as approved (TÜV and MCERTS) technologies for in-stack measurement of gas, particulate and flow concentration. They allow to optimize the whole-plant’s efficiency through measurement & control, facilitate legislative compliance, support ISO 14000 objectives and save operational costs by reducing plant’s maintenance requirements and ...
By ENVEA based in Poissy, FRANCE.
-
Process analyzers & instruments for NOx emissions
By AMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA).
-
Air Pollution Removal Orthopedic appliances Industry
Removal of acid gases and NOx from material surface treatments. Remove titanium dust from grinding, abrasive polishing and buffing operations. Emissions from high temperature ...
By Bionomic Industries Inc based in Mahwah, NEW JERSEY (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you