Nox Emissions Equipment For Air And Climate Available In Maine
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 811 CM is the next generation in two-channel emissions monitoring instrumentation. Unique in speed and reliability, the nCLD 811 CM is modular designed and allows the continuous analysis of NO, NO2, NOX, NH3 and NOX-Amines in raw exhaust gasses and other samples with NOX concentrations ranging from several thousand ppm down to a ppb. Its graphical user interface also individually ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
Vehicle Exhaust Optical Bench is a gas analysis module based on Ultraviolet Differential Optical Absorption Spectroscopy(UV-DOAS), which is able to directly measure NO and NO2 in vehicle/steamship exhust and calculate NOx, without ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
The NO/NO2 gas analyzer is based on DOAS and PLS technology able to measure the concentration of gases including SO2, NO2, NO, NH3, CL2, O3, H2S etc, It has features of high measurement accuracy ,outstanding,reliablility,fast response time and wide applicable ...
-
Manufactured by Tecnoclima Spabased in ITALY
PMX - premix condensing unit heaters for indoor suspended installation with direct air diffusion into the environment (axial fan). ...
-
Manufactured by Dado Tank srlbased in ITALY
In compliance with new eu legislation, many new commercial vehicles run with a selective catalytic reduction system or scr. This system substantially reduces nitrogen oxide (nox) emissions by converting it into harmless nitrogen and water through the use of a special catalytic converter and a non-explosive, nontoxic, non-flammable, water-based urea solution called adblue. ...
-
Manufactured by Xebec Adsorption Inc.based in CANADA
Displacing diesel fuel with natural gas provides huge cost savings for drilling and frac pump operators. Xebec's mobile solution enables diesel displacement for significantly lower operating costs, longer engine life and environmental ...
-
Manufactured by CECO Environmentalbased in USA
Through years of experience and knowledge, we have patented innovative technologies designed to reduce nitrogen oxide (NOx) emissions for new or existing coal, oil, and gas fired boilers. Our CCA brand Selective Non-Catalytic Reduction (SNCR) systems provide a low cost technique to reduce NOx emissions by 30%-60% for both boilers and lime kilns. The SNCR process involves injecting a reagent into ...
-
Manufactured by Cummins Inc. - Cummins Emission Solutionsbased in USA
Cummins Emission Solutions airless and air-assisted urea dosing systems enable reduction of oxides of nitrogen (NOx) emissions for selective catalytic reduction (SCR). Our knowledge and experience with urea-based systems and components complement any SCR solution. Understanding the complexity of the commercial vehicles and equipment allow us to offer a more integrated approach while delivering ...
-
Manufactured by KNESTEL Technologie & Elektronik GmbHbased in GERMANY
The project objective was to develop a device for measuring the concentration of nitrogen oxides (NO and NOX ) in the exhaust gas of vehicles and combustion processes. The challenge here was to achieve an enormously high dynamic range with measuring ranges between 0-100 ppm and 0-3000 ppm. The detection limit was to be only a few parts-per-billion. Another challenge was to minimize the ...
-
Manufactured by Fuel Tech, Inc.based in USA
The NOxOUT SNCR Process is a urea-based Selective Non-Catalytic Reduction (SNCR) process for reduction of oxides of nitrogen (NOx) from stationary combustion sources. The process requires precisely engineered injection of stabilized urea liquor into combustion flue gas temperatures as high as 2500° F. Fuel Tech customizes the design and injection strategy for each application since most NOx ...
-
Manufactured by TAECHIN SMET Corporationbased in SOUTH KOREA
In the high temperature combustion processes, the nitrogen contained in the air reacts with the oxygen producing oxides of nitrogen in the forms of monoxide and dioxide. The term “NOx” incorporates the total amount of the two components. The reference method of the NOx content definition in a gas mixture is based on the NDIR and CLD(chemiluminescent) that can be, however, only applied ...
-
Manufactured by Enerac, LLCbased in USA
The ENERAC Model 3000E is the most advanced and accurate electrochemical emissions analyzer ever produced. With its range of automatic QA/QC capabilities, the Enerac 3000E provides accurate, documented, defensible data for compliance monitoring purposes, e.g. NSR, Title V Periodic Monitoring, CAM Plan Development, Emission Trading, PAL, Audits, ...
-
Manufactured by Rypos, Inc.based in USA
California Air Resource Board Transport Refrigeration Units regulations apply to owners and operators of diesel-fueled and TRU generator sets installed on trucks, trailers, shipping containers, or railcars that operate in the state of California (including out-of-state ...
-
Manufactured by Vanairebased in USA
Vanaire specializes in the design and fabrication of Nitrogen Oxide (NO) acid scrubbers with unmatched capture and removal efficiency of NO emissions. Nitrogen Oxide is a corrosive and hazardous acid generated by a wide variety of industrial and manufacturing processes. At Vanaire, our engineering team is committed to designing and building nothing but the most reliable and effective air ...
-
Manufactured by Cubic Sensor and Instrument Co., Ltdbased in CHINA
Cubic Auto Oxygen 02 Sensor is used to measure the oxygen content in automobile exhaust, and convert the oxygen content into an electrical signal that is transmitted to the ECU, this allows the engine to achieve the target excess air factor (λ= 1) in a closed-loop; Ensure maximum conversion efficiency for hydrocarbons (HC), carbon monoxide (CO) and nitrogen oxides (NOx) in the exhaust, and ...
-
Manufactured by Aprovis Energy Systems GmbHbased in GERMANY
SCR catalytic converters perform the selective catalytic reduction of nitrogen oxides (NOx) from exhaust gases with the help of a reducing agent. The APROVIS Control System (ACS) ensures controlled and precisely coordinated dosing of the reducing agent and optimum mixing with the exhaust ...
-
Manufactured by NGK Insulators, Ltd.based in JAPAN
NGK has developed NOx sensors capable of measuring NOx concentration in motor vehicle exhaust ...
-
Manufactured by CECO Environmentalbased in USA
With years of experience and knowledge, we have patented an innovative delivery, metering and injection system designed to reduce nitrogen oxide (NOx) emissions. Our CCA brand TRIM-NOX XL SCR Injection Module automatically injects a urea or ammonia based reagent into the exhaust gas of fuel oil or natural gas boilers, furnaces, or turbines to reduce NOx emissions. Each module is engineered to ...
-
Manufactured by Nett Technologies Incbased in CANADA
The Nett BlueCAT™ 200 emission control system is verified by the California Air Resources Board for retrofit on propane fueled Large Spark Ignition (LSI) engines. These engines are typically used in forklifts, floor care machinery, aerial lifts, ground support equipment, and other industrial applications under the LSI-2 rule at 1.5 g/bhp-hr NOX+HC, Level 3A ...
-
Manufactured by Dongguan City Tak Trade Co., Ltd.based in CHINA
The horizontal, sequential-fire three-pass boiler meets all modern low-temperature hot water requirements. With the optional high-efficiency flue gas waste heat recovery device and technology. Surgery. Can greatly save question material ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you