Nox Monitoring Equipment For Air And Climate Near Nova Scotia
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME CEW4 series is a microprocessor-based up to 4 channels multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a 900 MHz or 2.4 GHz wireless ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme GasPost II toxic gas sensor/transmitter measures CO and NO2 gas concentrations in enclosed areas and transmit its readings to a CEL-series monitor/controller over an addressable RS-485 “Daisy-Chain” sensor ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME Wireless MultiSet series is a microprocessor-based multipoint multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote GasPost sensor/transmitters is accomplished through a 900 MHz or 2.4 GHz wireless network operating in a range of 1500-2000 ft., ...
-
Manufactured by Ponsse Plcbased in FINLAND
The 8-wheeler PONSSE Bear is the largest harvester in the Ponsse product range and an unbeatable powerhouse for thick trees and demanding conditions. The product upgrade focuses on efficiency, structural endurance and ease of maintenance and use. At the same time, Bear has seen a complete ...
-
Manufactured by Amthor Internationalbased in USA
Diesel Exhaust Fluid or DEF is used in the exhaust system of a truck to break down dangerous NOx emissions into harmless nitrogen and water. All Amthor DEF tanks are completely stainless steel and are designed as a Cardinal Champion tank style of our Refined Fuel Tanker Line. Our DEF tanks are available with or without insulation and can be heated if requested. We offer several different types ...
-
Manufactured by TSI Incorporatedbased in USA
The Series 6300 CA-CALC Compliance Protocol Exhaust Emissions Analyzers guide consultants and boiler service professionals through each step of the CTM-34 test protocol, provide mass emissions calculations of exhaust emissions and print reports on site. These features streamline the testing process so the user can complete periodic combustion testing quickly and with ensured accuracy. Additional ...
-
Manufactured by Sitelab Corporationbased in USA
Sitelab's UVF-500D analyzer, part no. 50200, is a rugged, battery operated, low cost handheld instrument which features two optical channels. It's made for Sitelab by Turner Designs, Inc. and is a direct replacement for the older TD-500D model. The UVF-500D is sold online and distributed with our partner company, Obstitech ApS in Denmark. A full line of test supplies and accessories are ...
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The OPTIBAR PT 2000 is an averaging pitot tube for applications with clean liquids, gases and steam. It is ideally suited for DP flow measurements requiring low pressure drop or cost-effective flow metering in extremely large pipes (up to DN20000 / 800"). Unlike conventional single-point pitot tubes that have the limitation of being a point-velocity device, the OPTIBAR PT 2000 averaging pitot ...
-
Manufactured by Servomex - a Spectris Companybased in USA
Combustion and Ultra-Low NOx emissions testing and monitoring in one simple analyser using a Chemiluminescence Detector (CLD). The versatile SERVOPRO NOx gas analyzer uses the time-proven Chemiluminescence detection method to measure NO or NO/NO2/NOx concentrations all in one analyzer perfect for continuous monitoring for industrial stationary sources emissions or ambient air, and fast enough for ...
-
PremiumManufactured by Ecomesurebased in FRANCE
EcomSmart collects data in real time and wirelessly transmits them to Ecomesure's advanced web platform, where they can be analyzed, managed and uploaded onto websites, smart city platforms and imported into software programs. The web platform also allows you to remotely control your ...
-
Manufactured by PID Analyzers, LLCbased in USA
The Model 1000 is a low cost continuous Analyzer. There are a number of sensors 30+ EC, CG & TCD. It has an optional 4-20 mA output, a single programmable setpoint, larger pump & an industrial NEMA 4 enclosure. This 1000 has a variety of sensors to chose from (>40) and comes with an Operator's Manual, configuration software and RS232 ...
-
Manufactured by PID Analyzers, LLCbased in USA
The Model 202 is a low cost continuous IR Analyzer. It has an optional 4-20 mA output, a single programmable setpoint, larger pump & an industrial NEMA 4 enclosure. This 202 has the choice of one or more CH4, CO2, CO, N2O or, refrigerant gas sensor, Operator's Manual, configuration software and RS232 ...
-
Manufactured by PID Analyzers, LLCbased in USA
The Model 113+ is a EC based Analyzer that can measure up to ppm to% v/v of components and has the capability to add up to 2 EC sensors and a CG or TCD sensor. The Model 113 includes the choice of one Snap-On Module plus up to 1-3 optional electrochemical sensors an an optional TCD or CG sensor , datalogging, Operator's Manual, and Rechargeable Nickel Metal Hydride ...
-
Manufactured by PID Analyzers, LLCbased in USA
Model 102+ Photoionization (PID) Analyzer for VOC’s (0-500 & 0-5000 ppm) +4 sensors- 6 Channel PID. Technologies: Photoionization (9.5, 10.0, 10.6, 11,7 eV ppm), Infrared CO2, CH4, Electrochemical- PID + 4 sensors- 6 Channel PID analyzer with optional ppb ...
-
Manufactured by PID Analyzers, LLCbased in USA
Model 102a Photoionization (PID) Analyzer for VOC's (0-500 & 0-5,000 ppm) ppm PID Only- with ppb Option. Technologies: Photoionization (9.5, 10.0, 10.6, 11,7 eV ppm) PID Only , with optional ppb ...
-
Manufactured by PID Analyzers, LLCbased in USA
The Model 107+ is a Stack Gas Analyzer that can measure high ppm or % levels of combustion gases such as SO2, NO, NO2 CO, O2 & CO2 and has the capability to add up to 4 sensors: CO2 plus 3 EC sensors. The Model 107 includes the choice of one CG Snap-On Module with one EC sensor plus 2 optional electrochemical sensors and one optional IR sensor for CO2, datalogging, Operator's Manual, and ...
-
Manufactured by Topacbased in USA
O2, CO2, CO NO, NOx, NO2, SO2,Efficiency, Excess Air, Tair Tgas, Draft, Diff Press, Providing the latest and most innovative “ALL-IN-ONE” Combustio n Gas Analyzers for COMPLETE Boiler & Burners Set-Ups, Servicing & ...
-
Manufactured by Topacbased in USA
O2, CO2, CO NO, NOx, NO2, SO2,Efficiency, Excess Air, Tair Tgas, Draft, Diff Press, Ambient CO & NO. Providing the latest and most innovative “ALL-IN-ONE” Combustio n Gas Analyzers for COMPLETE Boiler & Burners Set-Ups, Servicing & ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 2130 NOx converter tester has been designed to generate a stable NO2 concentration with a small reaction time. It is based on the sonic nozzles technology (ISO 6145-6 technology) and high stability pressure regulators. The NOx converter tester is often used together with a multi-steps gas divider also based on sonic nozzles and high precision pressure regulators. In order to validate ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 2106 is a gas mixer mainly used to calibrate and linearize gas monitors and to generate specific gas mixtures. The Sonimix 2106 is based on the principle of gas flow through sonic nozzles and is built according the ISO 6145/6 standard. The sonic nozzle principle makes it the most accurate and stable device on the market. It generates binary mixtures from 0 to 100% in fixed steps in a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you